Development of permeability test method for porous concrete block pavement materials considering clogging
Source abstract
Abstract
Abstract Pervious pavement has been used widely due to efficient hydrological characteristics such as reduction of runoff during floods, providing delay of rainwater into sewer systems and ground water quality improvement. However, clogging prevents it from functioning properly due to sedimentation after a short period of service, which results to poor permeability and performance of pervious pavement. In this study, the causes of clogging were investigated and a clogging simulator was developed in order to evaluate the sustainable permeability of porous concrete block pavement in advance. Furthermore, a test method for verifying the sustainability of infiltration which can predict and assess the permeability performance by years of service was proposed. In addition, the penetration of contaminants also varies depending on vehicle vibration and the rainwater that permeates together with it. It was found that the pores were easily clogged with the vibration frequency increased, but with the amount of contaminants increased to a degree clogging had less influence on vibration. When various types of porous concrete block pavers were evaluated with the proposed sustainable permeability test method, the coefficient of permeability before and after the test have shown very high correlation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Infrastructure Maintenance and Monitoring · Hydraulic flow and structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Predicting physical clogging of porous and permeable pavements10.1016/j.jhydrol.2012.12.009 ↗
2. Water Sensitive urban design – The story thus far
3. Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots10.1016/j.jenvman.2011.09.021 ↗
4. UK Research into the performance of permeable pavement, reservoir structures in controlling stormwater discharge quantity and quality10.2166/wst.1995.0016 ↗
5. Metallic pollution in clogging materials of urban porous pavements10.2166/wst.1995.0014 ↗
6. ASTM C 1701/C 1701M – 09 · 2009
7. KS F 4419 · 2009
8. Amirjani · 2010
9. Estimation of tire–road friction by tire-rotational vibration model
10. 2010