journal article·2016-11Open access

Performance evaluation of traditional timber joints under cyclic loading and their influence on the seismic response of timber frame structures

Elisa Poletti, Graça Vasconcelos, Jorge M. Branco, Aikaterini M. Koukouviki

Abstract

Timber joints represent the governing part of a timber structure, particularly when assessing its seismic response. In order to better assess the seismic capacity of traditional timber frame structures, particularly timber-framed shear walls, pull-out and in-plane cyclic tests were carried out on their joints (half-lap joints). The aim is to better understand the influence of the joints on the walls and their influence on failure mechanisms and capacity. Their seismic characterisation was obtained via the analysis of the hysteretic behaviour and dissipative capacity of both unreinforced and retrofitted joints (using self-tapping screws, steel plates and GFRP sheets). Results show that all strengthening techniques were able to improve the dissipative and load-bearing capacity, but care should be taken into not over-stiffening the joints, as it would lead to an overly rigid structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Wood Treatment and Properties · Masonry and Concrete Structural Analysis · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A hysteretic model for “frontal” walls in Pombalino buildings10.1007/s10518-012-9360-0 ↗
2. Seismic behaviour of tra-ditional timber frame walls: experimental results on unrein-forced walls10.1007/s10518-014-9650-9 ↗
3. In-plane vs Out-of-plane “Behaviour” of an Italian timber framed system: the Borbone constructive system. Historical analysis and experimental evaluation10.1080/15583058.2015.1041189 ↗
4. Experimental analysis of seismic resistance of timber-framed structures with stones and earth infill10.1016/j.engstruct.2014.02.020 ↗
5. Branco · 2008
6. Seismic behavior and retrofitting of joints in traditional timber roof structures10.1016/S0267-7261(02)00146-X ↗
7. Seismic strengthening and seismic improvement of timber structures10.1016/j.conbuildmat.2015.05.093 ↗
8. T. Descamps, J. Lambion, D. Laplume (2006), Timber structures: rotational stiffness of carpentry joints, Engineered Wood Products Association.
9. Multi-mode failure of form-fitting timber connections – experimental and numerical studies on the tapered tenon joint10.1016/j.engstruct.2012.12.002 ↗
10. K. Šobra, J.M. Branco, P. Fajman (2015), Behaviour of a dovetail joint using force analyses, in: 3rd International Conference on Structural Health Assessment of Timber Structures, Wroclaw – Poland, September 9–11, 2015.
11. Numerical 3D finite element modelling and experimental tests for dowel-type timber joints10.1016/j.conbuildmat.2009.04.006 ↗
12. Rotational performance of traditional Nuki joints with gap I: theory and verification10.1007/s10086-005-0734-7 ↗
13. Seismic vulnerability of historic Dieh-Dou timber structures in Taiwan10.1016/j.engstruct.2007.11.007 ↗
14. S. Ukyo, M. Karube, M. Harada, T. Hayashi (2008), Strain Analysis of Traditional Japanese Timber Joints under Tensile Loading, Engineering Wood Products Association.
15. Appleton · 2003
16. Appleton · 2009
17. Cóias · 2007
18. E. Tsakanika-Theohari, H. Mouzakis (2010), A post-Byzantine mansion in Athens. Restoration project of the timber structural elements, in: Proceedings of WCTE World Conference on Timber Engineering, June 20–24, 2010 Riva Del Garda, Trento, Italy.
19. Self-tapping screws and threaded rods as reinforcement for structural timber elements – a state-of-the-art report10.1016/j.conbuildmat.2015.04.028 ↗
20. FRP reinforcement of timber structures10.1016/j.conbuildmat.2015.06.020 ↗
21. Repair and reinforcement of timber columns and shear walls – a review10.1016/j.conbuildmat.2015.07.002 ↗
22. Full-scale experimental testing of retrofitting techniques in Portuguese “Pombalino” traditional timber frame walls10.1080/13632469.2014.897275 ↗
23. Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls10.1016/j.conbuildmat.2014.11.022 ↗
24. EN 12512 · 2001
25. Poletti · 2013
26. MAPEI (2002) Mapewood Paste 140, Thixotropic epoxy adhesive for the restoration of timber structural elements (Available at: ).
27. Rothoblaas (2012) Rothofixing – Timber carpentry (Available at: ).
28. MAPEI (2012) MapeWrap G UNI-AX, Uni-directional glass fibre fabric (Available at: ).
29. MAPEI (2013) MapeWrap 31, Medium viscosity epoxy resin for impregnation of MapeWrap with “dry system” (Available at: ).
30. ISO 21581 · 2010
31. In-plane seismic response of brick masonry walls10.1002/(SICI)1096-9845(199711)26:11<1091::AID-EQE693>3.0.CO;2-6 ↗