journal article·2016-11

Electrochemical chloride removal in reinforced concrete structures: Improvement of effectiveness by simultaneous migration of silicate ion

Hongyou Shan, Jinxia Xu, Zhuyin Wang, Linhua Jiang, Ning Xu

Publisher page

Abstract

Abstract For rehabilitating the chloride contaminated concrete structure to extend its service life, an electrochemical chloride extraction (ECE) treatment with simultaneous migration of silicate ion was proposed. The electrochemical technique is capable of alienating the chloride ions from the reinforcement and simultaneous injecting SiO 3 2− into the mortar to interact with Ca(OH) 2 , resulting in mortar desalination and densification. By a comparative experiment, the chloride extraction efficiency and corrosion properties of steel reinforcement in sodium chloride solution after the electrochemical treatment were investigated by chloride potentiometric titration, corrosion potential ( E corr ) and corrosion current density ( I corr ) determined by electrochemical impendence spectroscopy (EIS). The microstructure of mortar after the electrochemical treatment was observed using mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM), differential thermo-gravimetric analysis (DTG) and X-ray diffraction (XRD). About 40–55% of initial chloride was removed from the mortar using a current density of 2 A/m 2 . The electrochemical treatment can effectively prolong the initiation time of secondary corrosion for the steel reinforcement, due to the mortar densification by electro-migration of silicate ion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
2. Influence of elevated temperature on release of bound chlorides from chloride-admixed plain and blended cement pastes10.1016/j.conbuildmat.2015.12.016 ↗
3. Electrochemical chloride extraction (ECE) from steel-reinforced concrete specimens contaminated by “artificial” sea-water10.1016/j.corsci.2004.11.015 ↗
4. Factors influencing electrochemical removal of chloride from concrete10.1016/0008-8846(96)00067-1 ↗
5. Electrochemical chloride removal in reinforced concrete structures: improvement of effectiveness by simultaneous migration of calcium nitrite10.1016/j.conbuildmat.2010.06.099 ↗
6. Mechanism of electrochemical chloride removal10.1016/j.corsci.2007.05.019 ↗
7. Change of electrochemical property of reinforced concrete after electrochemical chloride extraction10.1007/s11595-006-4764-9 ↗
8. Non-uniform corrosion states of rebar in concrete under chloride environment10.1016/j.corsci.2015.01.031 ↗
9. Effect of the reinforcement bar arrangement on the efficiency of electrochemical chloride removal technique applied to reinforced concrete structures10.1016/j.corsci.2005.02.010 ↗
10. Electrochemical chloride extraction: efficiency and side effects10.1016/j.cemconres.2003.07.001 ↗
11. Mitigation of moisture damage in asphalt concrete: testing techniques and additives/modifiers effectiveness10.1016/j.conbuildmat.2015.03.001 ↗
12. Surface treatment of reinforced concrete in marine environment: influence on chloride diffusion coefficient and capillary water absorption10.1016/j.conbuildmat.2008.06.013 ↗
13. Effectiveness of surface coatings in improving concrete durability10.1016/S0958-9465(02)00087-2 ↗
14. C. Melegari, Treatment of Concrete Structures to Protect the Concrete and the Reinforcing Rods against the Effects of Atmospheric Agents, U.S. Patent Application Number 12/197326, Publication Number US20090050026, 2009.
15. Self-healing action of permeable crystalline coating on pores and cracks in cement-based materials10.1007/BF02870882 ↗
16. Electrokinetic nanoparticle treatment of hardened cement paste for reduction of permeability10.1061/(ASCE)0899-1561(2006)18:4(554) ↗
17. Electrokinetic nanoparticle treatment for corrosion remediation on simulated reinforced bridge deck10.1007/s11051-013-1952-3 ↗
18. Corrosion mitigation in reinforced concrete beams via nanoparticle treatment
19. Surface coating treatment and densification of mortar by electrodeposition method10.1680/macr.15.00042 ↗
20. Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method10.1007/BF02483292 ↗
21. Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements10.1002/maco.19780290804 ↗
22. Effect of fly ash on concrete reinforcement corrosion studied by EIS10.1016/S0958-9465(00)00003-2 ↗
23. Equivalent circuit for modelling the steel-concrete interface. I. Experimental evidence and theoretical predictions10.1016/S0010-938X(98)00036-5 ↗
24. Steel corrosion behaviour in carbonated alkali-activated slag concrete10.1016/j.corsci.2009.05.033 ↗
25. Influence of detection methods on chloride threshold value for the corrosion of steel reinforcement10.1016/j.conbuildmat.2008.09.011 ↗
26. Chloride corrosion threshold of reinforcing steel in alkaline solutions-open-circuit immersion tests10.5006/1.3290325 ↗
27. ASTM G33-99 · 2015
28. Tertiary biocomposite cement and its hydration10.1016/j.conbuildmat.2011.09.017 ↗
29. Investigation of the carbonation front shape on cementitious materials: effects of the chemical kinetics10.1016/j.cemconres.2007.04.002 ↗