journal article·2017-04

Influence of cationic polyurethane on mechanical properties of cement based materials and its hydration mechanism

Jinhui Tang, Jiaping Liu, Cheng Yu, Rui Wang

Publisher page

Abstract

Abstract The cation polyurethane (PUC) was used to improve the mechanical property of cement-based materials. Meanwhile, hydration kinetics, mineral phase compositions and microstructure characterization of hydration products were also investigated by isothermal calorimetry, quantitative X-ray diffraction and scanning electron microscope. The results show that the addition of PUC accelerated the cement hydration, altered the mineralogical compositions and morphology of hydration products, and correspondingly the microstructure of cement based materials. It is found that the addition of PUC decrease the brittleness of cement-based materials, especially for the early age. When the dosage of PUC is 0.5%, as the optimal mixing amounts, the tensile strengths of hardened cement pastes at 1 day, 3 day and 7 day separately increase by 49.92%, 93.63% and 88.44%, simultaneously the flexural strengths also exert corresponding increases by 8.38%, 26.61% and 36.40%, comparing with the plain cement-based materials. While, the addition of sand, will migitigate or even eliminate this toughness improving benefit due to the introduction of interfacial zone.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Taylor · 1997
2. Hydration of Portland cement
3. Mechanisms of Cement Hydration10.1016/j.cemconres.2010.09.011 ↗
4. Cement hydration: the role of adsorption and crystal growth10.1002/crat.201200713 ↗
5. Suplerplasticizers : properties and applications in concrete
6. Rixom · 1999
7. A 29 Si MAS NMR study of modified C-S–H nanostructures10.1016/j.cemconcomp.2008.11.004 ↗
8. Cement hydration and microstructure formation in the presence of water-soluble polymers10.1016/j.cemconres.2008.10.003 ↗
9. Effect of polymer latexes with cleaned serum on the phase development of hydrating cement pastes10.1016/j.cemconres.2016.02.013 ↗
10. Effect of polyacrylamide on the different properties of cement and mortar10.1016/j.msea.2004.08.050 ↗
11. Control of hydration rate of polymer modified cements by the addition of organically modified montmorillonites10.1016/j.cemconcomp.2012.12.006 ↗
12. Mechanical properties of EVA-modified cement for underground gas storage10.1016/j.jngse.2015.11.013 ↗
13. Mechanical properties of high porosity cement-based foam materials modified by EVA10.1016/j.conbuildmat.2016.02.145 ↗
14. Retardation effect of styrene-acrylate copolymer latexes on cement hydration10.1016/j.cemconres.2015.04.014 ↗
15. Effects of hydroxyethyl cellulose and oxalic acid on the properties of cement10.1016/S0008-8846(03)00060-7 ↗
16. Effect of styrene-butadiene rubber latex on mechanical properties of cementitious materials highlighted by means of nanoindentation10.1111/j.1475-1305.2008.00549.x ↗
17. The effect of polycations on early cement paste10.1016/j.cemconres.2010.06.002 ↗
18. Structure and properties of cationic polyurethane/polydimethylsiloxane surfactant-free micro emulsion membranes
19. Synthesis and properties of waterborne polyurethane modified with dihydroxylalkyl-terminated polydimethylsiloxane
20. Influences of styrene-acrylate latexes on cement hydration in oil well cement system at different temperatures10.1016/j.colsurfa.2016.07.082 ↗
21. Effect of EVA on the fresh properties of cement paste10.1016/j.cemconcomp.2011.10.004 ↗
22. Sulfate attack expansion mechanisms10.1016/j.cemconres.2013.07.005 ↗
23. Impact of different types of polycarboxylate superplasticisers on spontaneous crystallisation of ettringite10.1680/jadcr.15.00114 ↗
24. Hydration products in sulfoaluminate cements: evaluation of amorphous phases by XRD/solid-state NMR10.1016/j.cemconres.2016.05.014 ↗
25. Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures10.1016/j.conbuildmat.2015.12.097 ↗
26. Influence of carboxylated styrene-butadiene latex copolymer on Portland cement hydration10.1016/j.cemconcomp.2015.06.004 ↗
27. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
28. S. Yncheng, Z.H. Qing, L. Jing, et al. improvement of flexural strength of concrete by a kinf of admixture and its using method, CN 102351457 B. 2012. (In Chinese).
29. Atomistic simulation of the adsorption of calcium and hydroxyl ions onto portlandite surfaces-towards crystal growth mechanisms10.1016/j.cemconres.2015.11.008 ↗