journal article·2017-08

Asphalt modified with superfine electric arc furnace steel dust (EAF dust) with high zinc oxide content

Alexandra Loaiza, Sergio Cifuentes, Henry A. Colorado

Publisher page

Abstract

Abstract Electric arc furnace (EAF) dust is a complex ceramic-type hazardous waste generated by the metallurgical industry and produced worldwide in millions of tons. In this research EAF dust is evaluated as an admixture for asphalt up to 50 wt%. The microstructure was analyzed by optical and scanning electron microscopy. Fourier transform infrared spectra, penetration, softening point and viscosity tests were conducted for all compositions. The results show the penetration point increases until 10 wt% of waste and it then decreases. Conversely, the softening point, penetration index (PI) and viscosity, decrease after 5 wt% and reaches a minimum at 10 wt%. The particle distance was calculated using the composite materials theory, and other variables were analyzed in terms of inter-particle distance estimations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. EPA, Economic Assessment of the Association of Batery Recyclers Proposed Rule, 2003. .
2. Utilización del polvo de acería de horno de arco eléctrico
3. World Steel Association · 2015 · 1
4. Lead and zinc selective precipitation from leach electric arc furnace dust solutions10.1590/S1517-70762007000300011 ↗
5. “Ecological bricks” made with clays and steel dust pollutants10.1016/S0169-1317(96)00020-8 ↗
6. White Ordinary Portland Cement blended with superfine steel dust with high zinc oxide contents10.1016/j.conbuildmat.2016.02.201 ↗
7. Recycling of basic oxygen furnace steelmaking dust by in-process separation of zinc from the dust10.1016/j.jclepro.2015.07.009 ↗
8. Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture10.1016/j.resconrec.2012.10.003 ↗
9. Laboratory investigation to evaluate the effect of electric arc furnace dust (EAFD) on properties of Asphalt Concrete
10. SEM analysis on electron arc furnace dust (EAFD) and EAFD-asphalt mixture
11. Leachability of Cr(VI) and other metals from asphalt composites with addition of filter dust10.1016/j.wasman.2008.01.003 ↗
12. Fatigue performance of asphalt concretes made with steel slags and modified bituminous binders
13. Defining of EAF steel slag application possibilities in asphalt mixture production
14. Determination of zinc speciation in basic oxygen furnace flying dust by chemical extractions and X-ray spectroscopy10.1016/j.chemosphere.2007.09.063 ↗
15. Basic characterization and recovery of zinc by acid leaching of steelmaking dust from sanming Iron and steel Works, Guocheng Gongcheng Xuebao/The Chinese
16. Spence · 2005
17. Tecnología de inmovilización de desechos peligrosos en Costa Rica
18. Asphalt solidification of mixed wastes
19. The rheological properties of asphaltic bitumens
20. Thermo-rheological properties and storage stability of SEBS/kaolinite clay compound modified asphalts10.1016/j.eurpolymj.2005.07.004 ↗
21. A general system describing the visco-elastic properties of bitumens and its relation to routine test data10.1002/jctb.5010040501 ↗
22. Chapter 7 mechanical testing and properties of bitumens
23. Huang · 1993
24. Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content10.1016/j.actamat.2005.12.009 ↗
25. Chemical, physical, structural and morphological characterization of the electric arc furnace dust10.1016/j.jhazmat.2006.01.044 ↗
26. Infrared Spectroscopy for Organic Chemist. Web Resources, (n.d.). .
27. Nanoindentation investigation of asphalt binder and mastic cohesion10.1016/j.conbuildmat.2015.09.053 ↗
28. Filler reinforcement mechanisms in asphalt mastics
29. Implications of physico–chemical interactions in asphalt mastics on asphalt microstructure10.1016/j.conbuildmat.2015.06.026 ↗
30. Influence of the geometrical and physical properties of filler in the filler–bitumen interaction10.1016/j.conbuildmat.2014.12.008 ↗
31. Reinforcement and quantitative description of inorganic particulate-filled polymer composites10.1016/j.compositesb.2013.03.019 ↗
32. Bitumen performance in hot and arid climates
33. Characterization and behavior of interfaces
34. Effect Of Polymer Additives On The Physical Properties Of Bitumen Based
35. Filled thermoplastics
36. Electrospun polyacrylonitrile nanocomposite fibers reinforced with Fe 3 O 4 nanoparticles: fabrication and property analysis10.1016/j.polymer.2009.06.062 ↗
37. Polyaniline stabilized magnetite nanoparticle reinforced epoxy nanocomposites10.1021/am301529t ↗
38. Development and characterization of new shape-stabilized phase change material (PCM)—Polymer including electrical arc furnace dust (EAFD), for acoustic and thermal comfort in buildings10.1016/j.enbuild.2013.02.026 ↗