journal article·2017-08

Tests on magnesium potassium phosphate composite mortars with different water-to-binder ratios and molar ratios of magnesium-to-phosphate

Kyung-Ho Lee, Hyun-Sub Yoon, Keun-Hyeok Yang

Publisher page

Abstract

Abstract The objective of the present study is to examine the effect of the water-to-binder ratio (W/B) and the molar ratio (Mmp) of magnesium-to-phosphate on the fluid characteristics, compressive strength development, and pH variation of magnesium potassium phosphate composite (MKPC) mortars. A total of 25 mortar mixes were prepared, with the W/B varying from 20% to 40% and Mmp varying from 3.4 to 30.4. Using the present test data, the compressive strength development of MKPC mortars was empirically formulated, which reflects rapid strength gain. Considering practical qualifications, including a relatively good 28-day compressive strength above 30 MPa, delayed setting time, and a near-neutral pH not exceeding 9.4, it can be recommended that the Mmp and W/B be chosen to be below 5.1 and above 25%, respectively, in the MKPC system. With a decrease in the Mmp value, the peak intensities for struvite-k increased slightly, whereas the peak intensities for unreacted MgO were considerably weakened as the Mmp value fell below 5.1. The total porosity of the MKPC pastes was governed by the macro-capillary pores, implying that the 28-day compressive strength is inversely proportional to the macro-capillaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Effects of concrete content on seed germination and seedling establishment in vegetation concrete matrix in slope restoration10.1016/j.ecoleng.2013.06.016 ↗
2. Development of a low pH cementitious material to enlarge bioreceptivity10.1016/j.conbuildmat.2014.01.001 ↗
3. Development of low-pH cementitious materials for HLRW repositories resistance against ground waters aggression10.1016/j.cemconres.2009.11.008 ↗
4. Characterisation of magnesium potassium phosphate cement blended with fly ash and ground granulated blast furnace slag10.1016/j.cemconres.2015.01.015 ↗
5. Effect of the combination of fly ash and silica fume on water resistance of magnesium-phosphate cement10.1016/j.conbuildmat.2015.12.085 ↗
6. Development of low pH cement system forming magnesium silicate hydrate (M-S-H)10.1016/j.cemconres.2011.01.016 ↗
7. Effects of water content, magnesia-to-phosphate molar ratio and age on pore structure, strength and permeability of magnesium potassium phosphate cement paste10.1016/j.matdes.2014.07.073 ↗
8. Experimental study of magnesia and M/P ratio influencing properties of magnesium phosphate cement10.1016/j.conbuildmat.2014.04.136 ↗
9. ASTM C124, C403/C403M, C109 · 2012
10. Neville · 1995
11. Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio10.1016/j.cemconres.2014.10.019 ↗
12. Mechanism of setting reaction in magnesia-phosphate cements10.1016/S0008-8846(99)00254-9 ↗
13. Characteristics of magnesium polyphosphate cements derived from ammonium polyphosphate solutions10.1016/0008-8846(83)90008-X ↗
14. Experimental and computational investigation of magnesium phosphate cement mortar10.1016/j.conbuildmat.2016.02.200 ↗
15. Structural concrete: textbook on behaviour, design and performance
16. Development of a neutral cementitious material to promote vegetation concrete10.1016/j.conbuildmat.2016.10.032 ↗
17. Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concrete10.1016/j.conbuildmat.2013.12.010 ↗
18. Effects of fly ash, retarder and calcination of magnesia on properties of magnesia-phosphate cement10.1680/adcr.14.00029 ↗
19. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗