journal article·2017-09Open access

Bond behaviour of Steel Reinforced Grout for the extrados strengthening of masonry vaults

Stefano De Santis

Abstract

Abstract Steel Reinforced Grout (SRG), consisting of ultra high tensile strength steel cords embedded in a mortar matrix, is an effective solution for the upgrade of existing structures. Among its various applications, it can be applied to the extrados and the intrados of masonry vaults to improve their load-carrying and seismic capacity. Nevertheless, its bond strength on curved substrates, which is crucial for the design of the reinforcement of masonry arched members, has not been properly explored yet. This paper presents an experimental investigation on the bond behaviour of SRG applied to convex masonry substrates. Double-lap shear bond tests were carried in the laboratory on small-scale brickwork specimens to investigate the effect of curvature radius, bond length and textile architecture on bond strength and failure mode. Full-scale field tests were performed to study the bond behaviour and the resisting mechanisms of SRG applied to the extrados of an existing masonry vault, taking into account the actual substrate preparation and mortar curing conditions at a construction site.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Ochsendorf · 2010
2. Behavior of thin masonry arches repaired using composite materials10.1016/j.compositesb.2015.09.008 ↗
3. Seismic strengthening of masonry vaults with abutments using Textile Reinforced Mortar10.1061/(ASCE)CC.1943-5614.0000733 ↗
4. Strengthening of brick masonry arches with externally bonded steel reinforced composites10.1061/(ASCE)CC.1943-5614.0000030 ↗
5. Strengthening of historic masonry structures with composite materials10.1007/BF02524777 ↗
6. Current practice and open issues in strengthening historical buildings with composites10.1617/s11527-014-0359-7 ↗
7. Properties and potential for application of steel reinforced polymer and steel reinforced grout composites10.1016/S1359-8368(03)00080-5 ↗
8. Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: In-plane cyclic loading10.1617/s11527-006-9207-8 ↗
9. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
10. S. De Santis F.G. Carozzi G. de Felice C. Poggi Test methods for textile reinforced mortar systems Compos. Part B: Eng. http://dx.doi.org/10.1016/j.compositesb.2017.03.016.10.1016/j.compositesb.2017.03.016 ↗
11. State-of-the-art review on Steel Reinforced Polymer (SRP) systems for the strengthening of existing structures10.1016/j.compositesb.2016.08.025 ↗
12. FIB, Fédération internationale du béton. Externally bonded FRP reinforcement for RC structures. Fib Bulletin No. 14. Lausanne, Switzerland, 2001.
13. American Concrete Institute. ACI 440.2R-08 Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. Farmington Hills, MI, USA, 2008.
14. American Concrete Institute. ACI 440.7R-10 Guide for the design and construction of externally bonded Fibre-Reinforced polymer systems for strengthening unreinforced masonry structures. Farmington Hills, MI, USA, 2010.
15. CNR, Italian National Research Council. CNR-DT200 R1/2013. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. Rome, 2013.
16. American Concrete Institute. ACI 549.4R-13 Guide to design and construction of externally bonded Fabric-Reinforced Cementitious Matrix (FRCM) systems for repair and strengthening concrete and masonry structures. Farmington Hills, MI, USA, 2013.
17. Mortar-based systems for externally bonded strengthening of masonry10.1617/s11527-014-0360-1 ↗
18. Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling10.1016/j.conbuildmat.2014.04.070 ↗
19. Steel reinforced grout systems for the strengthening of masonry10.1016/j.compstruct.2015.08.094 ↗
20. Investigation on the bond behavior of clay bricks reinforced with SRP and SRG strengthening systems10.1617/s11527-014-0437-x ↗
21. Multi-level characterization of steel reinforced mortars for strengthening of masonry structures10.1016/j.matdes.2016.08.034 ↗
22. Experimental tests on FRCM strengthening systems for tuff masonry elements (2017)10.1016/j.conbuildmat.2017.01.124 ↗
23. S. De Santis, F. Ceroni, G. de Felice, M. Fagone, B. Ghiassi, A. Kwiecień, G.P. Lignola, M. Morganti, M. Santandrea, M.R. Valluzzi, A. Viskovic, Round robin test on tensile and bond behaviour of steel reinforced grout systems, Compos. Part B Eng., doi: 10.1016/j.compositesb.2017.03.052.10.1016/j.compositesb.2017.03.052 ↗
24. Debonding of composites on a curved masonry substrate: experimental results and analytical formulation10.1016/j.compstruct.2014.02.004 ↗
25. Behaviour of brick masonry vaults strengthened with FRP laminates10.1061/(ASCE)1090-0268(2001)5:3(163) ↗
26. Strengthening of masonry arches with fiber-reinforced polymer strips10.1061/(ASCE)1090-0268(2004)8:3(191) ↗
27. Intrados strengthening of brick masonry arches with composite materials10.1016/j.compositesb.2011.03.005 ↗
28. Rehabilitation of masonry arches with compatible advanced composite material10.1016/j.conbuildmat.2011.03.065 ↗
29. P. Girardello, A. Pappas, F. da Porto, M.R. Valluzzi, Experimental testing and numerical modelling of masonry vaults, in: Proceedings of Int. Conf. on Rehabilitation and Restoration of Structures Chennai, India, 2013.
30. Strengthening of masonry-unreinforced concrete railway bridges with PBO-FRCM materials10.1016/j.compstruct.2013.03.002 ↗
31. Extrados strengthening of brick masonry arches with PBO–FRCM composites: experimental and analytical investigations10.1016/j.compstruct.2016.04.030 ↗
32. Tensile behaviour of mortar-based composites for externally bonded reinforcement systems10.1016/j.compositesb.2014.09.011 ↗
33. Experimental characterization of composite-to-brick masonry shear bond10.1617/s11527-015-0669-4 ↗
34. Ncorr: open-source 2D digital image correlation Matlab software10.1007/s11340-015-0009-1 ↗
35. Application of Digital Image Correlation to composite reinforcements testing10.1016/j.compstruct.2016.10.096 ↗
36. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
37. Systematic errors in two-dimensional digital image correlation due to lens distortion10.1016/j.optlaseng.2012.08.012 ↗