Coupled axial-shear numerical model for CLT connections
Source abstract
Abstract
Abstract A new coupled axial-shear numerical model is proposed to simulate the response of typical Cross Laminated Timber (CLT) connections under general loading conditions. The general model is then specialized for hold-down connections. To this aim, a series of experimental tests was first designed and performed at University of Bologna, in order to provide for the necessary data for the characterization of the numerical model. The main parameters required to define the constitutive law of the model are here evaluated by means of linear regression analyses performed on the experimental data. Both monotonic and cyclic test series are taken into account to calibrate and then validate the proposed numerical model, demonstrating its effectiveness in representing the coupled response of hold-down connections under simultaneous application of axial and shear forces. Finally, the response of a whole CLT panel subjected to a cyclic top displacement history is studied, confirming the need of considering axial-shear interaction in modelling of numerical connections.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tree Root and Stability Studies · Wood Treatment and Properties · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Experimentally based q-factor estimation of cross-laminated timber walls10.1680/jstbu.15.00009 ↗
2. M. Izzi, A. Polastri, M. Fragiacomo, Advanced modelling of CLT wall systems for earthquake resistant timber structures, in: INTER 2016 Meeting, 2016. Graz, Austria, Paper 49-15-6.
3. A. Ceccotti, M.P. Lauriola, M. Pinna, C. Sandhaas. SOFIE project – Cyclic tests on cross-laminated wooden panels, in: 9th World Conf. Timber Eng. 2006, WCTE 2006, August 6, 2006–August 10, 2006. 1, 2006, pp. 805–812.
4. New technologies for construction of medium-rise buildings in seismic regions: the X-lam case
5. SOFIE project – 3D shaking table test on a seven-storey full-scale cross-laminated timber building10.1002/eqe.2309 ↗
6. Performance of a 2-Story CLT house subjected to lateral loads10.1061/(ASCE)ST.1943-541X.0001315 ↗
7. Full-scale shaking-table tests of X-lam panel system and numerical verification: specimen 110.1061/(ASCE)ST.1943-541X.0000754 ↗
8. Shaking-table test of a cross-laminated timber structure10.1680/stbu.13.00086 ↗
9. M. Popovski, J. Schneider, M. Schweinsteiger. Lateral load resistance of cross-laminated wood panels, in: 11th World Conf. Timber Eng. 2010, WCTE 2010, June 20, 2010–June 24, 2010, 2010, pp. 3394–3403.
10. Full-scale tests and numerical analysis of low-rise CLT structures under lateral loading10.1061/(ASCE)ST.1943-541X.0001348 ↗
11. Cyclic behavior of CLT wall systems : experimental tests and analytical prediction models10.1061/(ASCE)ST.1943-541X.0001246 ↗
12. Behaviour factor for innovative massive timber shear walls10.1007/s10518-015-9765-7 ↗
13. Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures10.1016/j.conbuildmat.2016.06.072 ↗
14. C. Sandhaas, J. Boukes, J.W.G. Van De Kuilen, A. Ceccotti. Analysis of X-lam panel-to-panel connections under monotonic and cyclic loading, in: CIB-W18 Meeting forty-two, International council for research and innovation in building and construction, working commission W18 – timber structures, Dubendorf, Switzerland, 24/08/09→24/08/09, 2009.
15. Experimental characterization of monotonic and cyclic loading responses of CLT panel-to-foundation angle bracket connections10.1061/(ASCE)MT.1943-5533.0001144 ↗
16. Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures10.1617/s11527-014-0278-7 ↗
17. Procedures for seismic characterization of traditional and modern wooden building types
18. J. Liu, F. Lam, Experimental test of cross laminated timber connections under bi-directional loading in Proceedings of the World Conference on Timber Engineering (14WCTE 2016), Austria: Vienna University of Technology, 22nd-25th August 2016. WCTE 2016 e-book|1191 – ISBN: 978-3-903039-00-1.
19. 2016 · 110
20. L. Pozza, B. Ferracuti, M. Massari, M. Savoia. Axial – shear interaction on CLT hold-down connections – experimental investigation. Submitted 2016.
21. Influence of wall assembly on behaviour of cross-laminated timber buildings.10.1680/stbu.13.00081 ↗
22. B. Dujic, K. Strus, R. Zarnic, A. Ceccotti. Prediction of dynamic response of a 7-storey massive X-lam wooden building tested on a shaking table, in: Proceedings of World Conference on Timber Engineering (WCTE), Riva del Garda, Italy, 2010.
23. Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions10.1016/j.engstruct.2011.05.020 ↗
24. I. Gavric, G. Rinaldin, C. Amadio, M. Fragiacomo, A. Ceccotti, Experimental-numerical analyses of the seismic behaviour of cross-laminated wall systems, 15th World Conference on Earthquake Engineering, 2012.
25. Approximate R-factor for cross-laminated timber walls in multistory buildings10.1061/(ASCE)AE.1943-5568.0000117 ↗
26. Force modification factors for CLT structures for NBCC10.1007/978-94-007-7811-5_50 ↗
27. A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures10.1002/eqe.2310 ↗
28. A. Ceccotti, A. Vignoli, Engineering timber structures: an evaluation on their seismic behaviour, in: Proceedings of the International Timber Engineering Conference, 1990, Tokyo, Japan, pp. 946–953.
29. V. Prakash, G.H. Powell, S. Campbell, Drain-2DX base program description and user guide version. Report No. UCB/SEMM-93/17. Department of Civil Engineering, University of California, Berkeley, 1993.
30. Cyclic analysis of wood shear walls10.1061/(ASCE)0733-9445(2001)127:4(433) ↗
31. L.N. Lowes, N. Mitra, A. Altoontash, A beam-column joint model for simulating the earthquake response of reinforced concrete frames, Pacific Earthquake Engineering Research Center, Report 2003/10, 2004.
32. H. Isoda, S. Tesfamariam, Connections for timber – concrete hybrid building : experimental and numerical model results. 2016; 30(5):1–12. doi:10.1061/(ASCE)CF.1943-5509.0000849.10.1061/(ASCE)CF.1943-5509.0000849 ↗
33. J. Liu, F. Lam, Numerical simulation for the seismic behaviour of mid-rise CLT shear walls with coupling beams, in: Proceedings of World Conference on Timber Engineering (WCTE). Quebec City, Canada, August 10–14, 2014.
34. Performance of semirigid timber frame with Lagscrewbolt connections: experimental, analytical, and numerical model results10.1007/s40091-015-0107-4 ↗
35. Cyclic shear behaviour of gypsum board-to-steel stud screw connections in nonstructural walls10.1193/062714EQS091M ↗
36. Hysteresis behaviour of bracket connection in cross-laminated-timber shear walls10.1016/j.conbuildmat.2013.07.050 ↗
37. Ductility estimation for a novel timber–steel hybrid system10.1061/(ASCE)ST.1943-541X.0001296 ↗
38. An analytical formulation of q-factor for mid-rise CLT buildings – a parametric numerical analyses
39. McKenna · 2000
40. ETA-11/0086, Hold-downs for timber-to-timber or timber-to-concrete or steel connections, European Organisation for Technical Approvals, Brussels, Belgium, 2011.
41. EN 26891 , Timber structures. Joints made with mechanical fasteners, General principles for the determination of strength and deformation characteristics, CEN, Brussels, Belgium, 1991.
42. EN 12512, Timber structures, Test methods. Cyclic testing of joints made with mechanical fasteners, CEN, Brussels, Belgium. 2011.
43. W. Munoz, M. Mohammad, A. Slaenikovich, P. Quenville, Need for a harmonized approach for calculations of ductility of timber assemblies, Meeting 41 of the Working Commission W18-Timber Structures, CIB. St. Andrews, Canada, 2008, paper CIB-W18/41-15-1.
44. Ductility of timber joints under static and cyclic loads10.1680/stbu.10.00017 ↗
45. Experiments on dowel-type timber connections10.1016/j.engstruct.2012.09.010 ↗
46. D. Talledo, L. Pozza, A. Saetta, M. Savoia, Coupled shear-tension numerical model for modelling of CLT connections, in XXIII World Conf. Timber Eng., WCTE 2016, Vienna, Austria, 2016.
47. D. Casagrande, A. Polastri, T. Sartori, C. Loss, Chiodega M., Experimental campaign for the mechanical characterization of connection systems in the seismic design of timber buildings, in: Proceedings of the World Conference on Timber Engineering (14WCTE 2016), Austria: Vienna University of Technology, 22nd-25th August 2016. WCTE 2016 e-book|321 – ISBN: 978-3-903039-00-1.