journal article·2018-02

Inhibitive effect of sodium molybdate on the corrosion behavior of galvanized steel in simulated concrete pore solution

Yan-qi Wang, Gang Kong, Chun-shan Che, Bo Zhang

Publisher page

Abstract

Abstract To limit rapid dissolution of zinc and hydrogen evolution of zinc coating in fresh concrete environments at the early stage, the corrosion inhibition of sodium molybdate for galvanized steel in simulated concrete pore solutions with/without chloride ion addition was studied. The inhibitive effect of sodium molybdate was assessed by open circuit potential (OCP), potentiodynamic polarization test, polarization resistance measurement, scanning electron microscopy/energy dispersive spectrometry (SEM/EDS) and X-ray photoelectron spectroscopy (XPS) tests. The results showed that the formation of a Mo-containing film at the corroding interface occurred, which acted as a barrier effect to suppress the rapid dissolution and hydrogen evolution of the zinc layer in the high alkaline environments. Meanwhile, the presence of sodium molybdate also modified the formation and properties of the corrosion products formed on the sample surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Evaluation of the impact of corrosion of hot-dip galvanized reinforcement on bond strength with concrete – a review10.1016/j.conbuildmat.2016.11.096 ↗
2. Problems connected with use of hot-dip galvanized reinforcement in concrete elements10.1016/j.proeng.2017.02.086 ↗
3. Corrosion behavior of Zn-Al alloys in saturated Ca(OH)(2) solution10.1016/j.corsci.2016.09.009 ↗
4. Corrosion resistance of galvanized steel reinforcements in carbonated concrete: effect of wet-dry cycles in tap water and in chloride solution on the passivating layer10.1016/j.cemconres.2014.07.014 ↗
5. Effect of chloride ions on the corrosion of galvanized steel embedded in concrete prepared with cements of different composition10.1016/S1452-3981(23)07741-6 ↗
6. Alcohol-aminosilicate hybrid coatings for corrosion protection of galvanized steel in mortar10.1149/2.103406jes ↗
7. Effect of carbonation process on the passivating products of zinc in Ca(OH)(2) saturated solution10.1002/maco.201206868 ↗
8. Effect of concrete carbonation process on the passivating products of galvanized steel reinforcements10.1002/maco.201005776 ↗
9. Investigation of the major reduction reaction occurring during the passivation of galvanized steel rebars10.1016/j.corsci.2009.11.021 ↗
10. Service life of hot-dip galvanised reinforcement bars in carbonated and chloride-contaminated concrete
11. Effect of surface condition on the initial corrosion of galvanized reinforcing steel embedded in concrete10.1016/j.corsci.2008.06.035 ↗
12. Corrosion mechanism of hot-dip galvanised reinforcement bar in cracked concrete10.1016/j.corsci.2008.08.050 ↗
13. Kinetics, mechanism and characterisation of passive film formed on hot dip galvanized coating exposed in simulated concrete pore solution10.1016/j.surfcoat.2007.01.048 ↗
14. Corrosion of zinc in simulated carbonated concrete pore solutions10.1016/j.electacta.2007.01.014 ↗
15. Electrochemical aspects of galvanized reinforcement corrosion10.1016/B978-008044511-3/50020-7 ↗
16. Corrosion of galvanized steel reinforcements in alkaline solutions: Part 1: electrochemical results10.1179/000705987798271631 ↗
17. Corrosion of galvanized steel reinforcements in alkaline solutions. II. SEM study and identification of corrosion products10.1179/000705987798271749 ↗
18. Corrosion of galvanized steel in dilute Ca(OH) 2 solutions (pH 11.1-12.6)10.1179/000705987798271505 ↗
19. Corrosion of Galvanized and Galvannealed Steel in Solutions of pH 9.0 to 14.010.5006/1.3582994 ↗
20. SEM Study of the Corrosion Products of Galvanized Reinforcements Immersed in Solutions in the pH Range 12·6 to 13·610.1179/000705984798273524 ↗
21. Corrosion rate of galvanized steel immersed in saturated solutions of Ca(OH) 2 in the pH range 12–13.810.1179/bcj.1983.18.2.82 ↗
22. Methods for measuring pH in concrete: a review10.1016/j.conbuildmat.2015.12.032 ↗
23. Corrosion of hot-dip galvanized steel reinforcement
24. Molybdenum-phosphorus compounds based passivator to control corrosion of hot dip galvanized coated rebars exposed in simulated concrete pore solution10.1016/j.surfcoat.2008.03.038 ↗
25. Electrochemical and analytical assessment of galvanized steel reinforcement pre-treated with Ce and La salts under alkaline media10.1016/j.cemconcomp.2006.01.004 ↗
26. Influence of the conversion coating on the corrosion of galvanized reinforcing steel10.1016/j.cemconcomp.2006.01.010 ↗
27. Hybrid sol-gel coatings for corrosion protection of galvanized steel in simulated concrete pore solution10.1007/s11998-015-9751-7 ↗
28. Ureasilicate hybrid coatings for corrosion protection of galvanized steel in chloride-contaminated simulated concrete pore solution10.1149/2.0661512jes ↗
29. Hybrid sol-gel coatings for corrosion protection of hot-dip galvanized steel in alkaline medium10.1016/j.surfcoat.2015.01.034 ↗
30. Hot-dip galvanized steel dip-coated with ureasilicate hybrid in simulated concrete pore solution: assessment of coating morphology and corrosion protection efficiency10.1016/j.porgcoat.2015.07.008 ↗
31. Ouezdou Effect of inhibitors on the corrosion of galvanized steel and on mortar properties10.1016/j.cemconcomp.2012.08.014 ↗
32. The adsorption and inhibition effect of calcium lignosulfonate on Q235 carbon steel in simulated concrete pore solution10.1016/j.apsusc.2016.04.013 ↗
33. Evaluation of corrosion resistance properties of N, N '-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH)(2) solution with different concentrations of chloride ions by electrochemical experiments10.1016/j.conbuildmat.2016.03.174 ↗
34. Inhibitor evaluation in different simulated concrete pore solution for the protection of steel rebars10.1016/j.conbuildmat.2016.07.115 ↗
35. Inhibitive effect of sodium eperuate on zinc corrosion in alkaline solutions10.1016/j.corsci.2008.04.019 ↗
36. Inhibitive effect of molybdate ions on the electrochemical behavior of steel rebar in simulated concrete pore solution10.1007/s11661-016-3778-y ↗
37. Growth behavior of lanthanum conversion coating on hot-dip galvanized steel10.1016/j.surfcoat.2014.10.017 ↗
38. Chloride-induced corrosion resistance of high-strength stainless steels in simulated alkaline and carbonated concrete pore solutions10.1016/j.corsci.2011.12.012 ↗
39. An innovative specimen configuration for the study of Mg corrosion10.1016/j.corsci.2010.09.016 ↗
40. MoO42- as a soluble inhibitor for Zn in neutral and alkaline solutions10.1016/j.corsci.2015.05.005 ↗
41. The inhibitive mechanisms of nitrite and molybdate anions on initiation and propagation of pitting corrosion for mild steel in chloride solution10.1016/j.apsusc.2015.07.037 ↗
42. The revised pourbaix diagram for molybdenum
43. I. Puigdomenech, Hydra/Medusa Chemical Equilibrium Database and Plotting Software KTH Royal Institute of Technology, 2004.
44. R.G. Powers, Performance of plain and galvanized reinforcing steel during the initiation stage of corrosion in concrete with pozzolanic additions, (1996).
45. Analysis of the protective efficiency of galvanizing against corrosion of reinforcements embedded in chloride contaminated concrete10.1016/0008-8846(95)00215-4 ↗
46. Effect of minor nickel alloying with zinc on the electrochemical and corrosion behavior of zinc in alkaline solution10.1016/j.jpowsour.2010.03.071 ↗