journal article·2018-05

Effects by property homogeneity of aggregate skeleton on creep performance of asphalt concrete

Xunhao Ding, Tao Ma, Weiguang Zhang, Deyu Zhang, Teng Yin

Publisher page

Abstract

Abstract Since the aggregate skeleton of asphalt concrete is mainly formed by the coarse aggregates and it has important influences on the creep performance of asphalt concretes, this paper evaluated the property homogeneity of coarse aggregate skeleton on the creep performance of different asphalt concretes. Two different asphalt concretes with the same maximum nominal size of 13 mm but different gradation types, which are dense-graded Superpave asphalt concrete (SUP13) and gap-graded stone matrix asphalt concrete (SMA13) were prepared and evaluated. The particle flow code in three dimensions (PFC3D), which is a software based on discrete element method (DEM), was used for the discrete element modeling of asphalt concrete and the numerical simulation of laboratory creep test for asphalt concrete. The property homogeneity variation of aggregate skeleton was considered to follow Weibull distribution during DEM modeling. Based on the numerical analysis for different asphalt concretes, the influences by property homogeneity of aggregate skeleton on the macro creep performance of asphalt concrete and the distribution of micromechanical contacting forces within asphalt concrete were analyzed. It is found that the property homogeneity variation of aggregate skeleton generate obvious impacts on the creep performance of asphalt concrete through affecting the micromechanical contacting forces within asphalt concrete. And the property homogeneity variation of aggregate skeleton causes more obvious influence on the creep performance of asphalt concrete with stronger aggregate skeleton. Thus, improving the property homogeneity of aggregate skeleton is a benefic method to promote the creep performance of asphalt concrete, especially for the gap-graded asphalt concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Numerical methods in engineering · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Development and validation of nonlinear viscoelastic damage (NLVED) model for three-stage permanent deformation of asphalt concrete10.1016/j.conbuildmat.2015.10.201 ↗
2. Characterization of viscoplastic yielding of asphalt concrete10.1016/j.conbuildmat.2013.05.075 ↗
3. Numerical modeling of geogrid-reinforced flexible pavement and corresponding validation using large-scale tank test10.1016/j.conbuildmat.2016.06.081 ↗
4. Micromechanics prediction of effective modulus for asphalt mastic considering inter-particle interactions10.1016/j.conbuildmat.2015.10.053 ↗
5. Weak form equation-based finite-element modeling of viscoelastic asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001395 ↗
6. Design approach for epoxy modified bitumen to be used in antiskid surfaces on asphalt pavement10.1016/j.conbuildmat.2012.12.047 ↗
7. Permanent deformation response parameters of asphalt mixtures for a new mix-confined repeated load test10.1007/s11771-013-1632-6 ↗
8. Evaluation of permanent deformation of asphalt mixtures using different laboratory performance tests10.1016/j.conbuildmat.2013.12.015 ↗
9. Characterizing permanent deformation and fracture of asphalt mixtures by using compressive dynamic modulus tests10.1061/(ASCE)MT.1943-5533.0000471 ↗
10. Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder10.1016/j.conbuildmat.2014.04.074 ↗
11. Development of rutting performance model for asphalt concrete pavement based on test road and accelerated pavement test data10.1007/s12205-014-0394-5 ↗
12. Development of a new mechanistic-empirical rutting model for unbound granular material10.1061/(ASCE)MT.1943-5533.0001555 ↗
13. Study on influence factors of homogeneity of asphalt mixture
14. Effects of experimental method and aggregate type on index of asphalt mixture homogeneity
15. Influence of the compaction process on the air void homogeneity of asphalt mixtures samples10.1016/j.conbuildmat.2009.12.004 ↗
16. Homogeneity of lightweight aggregate concrete assessed using ultrasonic-echo sensing10.12989/cac.2009.6.3.225 ↗
17. Effect of reclaimed asphalt pavement gradation variation on the homogeneity of recycled hot-mix asphalt10.1016/j.acme.2013.03.003 ↗
18. Assessment of Asphalt specimen homogeneity10.1061/(ASCE)0733-947X(2001)127:5(363) ↗
19. Discrete numerical model for granular assemblies10.1680/geot.1979.29.1.47 ↗
20. Influences by air voids on fatigue life of asphalt mixture based on discrete element method10.1016/j.conbuildmat.2016.09.045 ↗
21. Micromechanical modeling for behavior of cementitious granular materials
22. Morphological characterization and mechanical analysis for coarse aggregate skeleton of asphalt mixture based on discrete-element modeling10.1016/j.conbuildmat.2017.08.008 ↗
23. Simulation of wheel tracking test for asphalt mixture using discrete element modelling
24. Effect of air voids on the high-temperature creep behavior of asphalt mixture based on three-dimensional discrete element modeling10.1016/j.matdes.2015.10.005 ↗
25. Micromechanical modeling of the viscoelastic behavior of asphalt mixtures using the discrete-element method10.1061/(ASCE)1532-3641(2007)7:2(131) ↗
26. Numerical modelling and mechanical behavior analysis of ancient tunnel masonry structures10.1016/j.tust.2007.04.006 ↗
27. Micromechanical response of aggregate skeleton within asphalt mixture based on virtual simulation of wheel tracking test10.1016/j.conbuildmat.2016.02.104 ↗
28. Discrete element modeling to predict the modulus of asphalt concrete mixtures10.1061/(ASCE)0899-1561(2004)16:2(140) ↗
29. Imaged-based discrete element modeling of hot mix asphalt mixtures10.1617/s11527-014-0328-1 ↗
30. Viscoelastic model for discrete element simulation of asphalt mixtures
31. Discrete element modelling of influences of grain shape and angularity on performance of granular mixes for asphalts10.1016/j.sbspro.2012.09.891 ↗
32. Predicting the dynamic behavior of asphalt concrete using three-dimensional discrete element method10.1007/s11595-012-0470-y ↗
33. Micromechanical characteristics of aggregate particles in asphalt mixtures10.1016/j.conbuildmat.2015.05.076 ↗
34. Algorithms for generating three-dimensional aggregates and asphalt mixture samples by the discrete-element method10.1061/(ASCE)CP.1943-5487.0000210 ↗
35. Numerical study on the effect of coarse-aggregate morphology on shear performance10.1520/JTE20130067 ↗
36. Investigation of the micro-mechanical response of asphalt mixtures by a three-dimensional discrete element model
37. J.Q. Chen, H. Wang, L. Li, Virtual Testing of Asphalt Mixture with Two-dimensional and Three-dimensional Random Aggregate Structures, International Journal of Pavement Engineering, 2015, published online.10.1080/10298436.2015.1066005 ↗
38. Evaluation of thermal conductivity of asphalt concrete with heterogeneous microstructure10.1016/j.applthermaleng.2015.03.070 ↗
39. Integrated experimental-numerical approach for estimating asphalt mixture induction healing level through discrete element modeling of a single-edge notched beam test10.1061/(ASCE)MT.1943-5533.0001231 ↗
40. Aggregate representation for mesostructure of stone based materials using a sphere growth model based on realistic aggregate shapes
41. Itasca Consulting Group. PFC3D version 4.0, Minneapolis, 2008.
42. Is Weibull distribution the most appropriate statistical strength distribution for brittle materials?10.1016/j.ceramint.2007.10.003 ↗
43. Estimation of fatigue failure of asphalt concrete based on three-parameter Weibull distribution
44. Two-parameter Weibull distribution theory testing analysis in fatigue life of asphalt mixture10.4028/www.scientific.net/AMM.97-98.45 ↗