Investigation of the bulk and surface microstructure of bitumen by atomic force microscopy
Source abstract
Abstract
Abstract Bitumen, the heavy residue of crude oil, can display a rich microscale morphology, including so-called Bee structures. The use of Atomic Force Microscopy (AFM) measurements in literature strongly indicates that the appearance of Bee structures is related to the presence of paraffin wax crystals. Most studies have investigated standard bitumen surfaces when cooling bitumen in an air atmosphere. Only a few investigations have analysed surfaces formed in other media or have analysed fractured surfaces which relate to the bulk morphology. Although considerable research has focussed on identifying Bee structures, less attention has been paid to the Bee structure morphology of different bitumen types and the relations to other binder parameters. The comparison between the micro morphology of the air-oil interface compared to the bulk phase volume has been studied even less. In this experimental study, five bitumen samples were selected based on differences in their natural wax content. Both the air-cooled surface interface and fractured surfaces were characterised using AFM in tapping mode. All the air-cooled surfaces revealed Bee structures, except the wax-free bitumen, which did not display the presence of any Bee structure. None of the fracture surfaces revealed Bee structures. Reheating a fractured surface of a wax-containing bitumen transformed the morphology into Bee structures. The experiments demonstrate that Bee structures are present in different binders but display very different shapes and sizes. However: image analysis indicates that the unit cell inside these structures is rather constant and independent of the binder type. This work confirms a relationship between natural wax and Bee structures and it also shows that Bee structures, as such, are a surface phenomenon which is not present in the bulk phase volume of samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Petroleum Processing and Analysis · Corrosion Behavior and Inhibition · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Structural and chemical analysis of bitumen using time-of-flight secondary ion mass spectrometry (TOF-SIMS)10.1016/j.fuel.2017.02.090 ↗
2. Direct observation of the asphaltene structure in paving-grade bitumen using confocal laser-scanning microscopy10.1111/j.0022-2720.2004.01373.x ↗
3. Lesueur · 2009 · 39
4. Identification of four material phases in bitumen by atomic force microscopy10.1080/14680629.2004.9689985 ↗
5. Atomic force microscope10.1103/PhysRevLett.56.930 ↗
6. New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy10.1046/j.1365-2818.1996.134416.x ↗
7. Bitumen in colloid science: a chemical, structural and rheological approach10.1016/S0016-2361(98)00054-4 ↗
8. Atomic force microscopy investigation of SHRP asphalts
9. Bitumen morphologies by phase-detection atomic force microscopy10.1111/j.1365-2818.2006.01540.x ↗
10. Measurement of the nanoscale roughness by atomic force microscopy: basic principles and applications
11. Measuring the nano mechanical properties and surface forces of materials using an atomic force microscope10.1116/1.576168 ↗
12. Overview literature on atomic force microscopy (AFM): basics and its important applications for polymer characterization
13. Atomic force microscopy and spectroscopy
14. Beginner’s guide to atomic force microscopy probing for cell mechanics10.1002/jemt.22776 ↗
15. Quantitative normal force measurements by means of atomic force microscopy towards the accurate and easy spring constant determination10.11648/j.nsnm.20160201.12 ↗
16. Quantitative temperature-depending mapping of mechanical properties of bitumen at the nanoscale using the AFM operated with Peak Force Tapping TM mode: quantitative mapping of mechanics of bitumen10.1111/jmi.12036 ↗
17. Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy10.1080/10298436.2011.575942 ↗
18. Investigating molecular interactions and surface morphology of wax-doped asphaltenes10.1039/C5CP07180A ↗
19. Micro-mechanical investigation of phase separation in bitumen by combining atomic force microscopy with differential scanning calorimetry results10.1080/14680629.2013.774744 ↗
20. Challenges while performing AFM on bitumen
21. Laboratory investigation of bitumen based on round robin DSC and AFM tests10.1617/s11527-013-0123-4 ↗
22. Surface wrinkling: the phenomenon causing bees in bitumen10.1007/s10853-013-7505-4 ↗
23. Adherence energy of asphalt thin films measured by force-displacement atomic force microscopy10.1061/(ASCE)MT.1943-5533.0001003 ↗
24. Relation of chemical composition to asphalt microstructure – Details and properties of micro‐structures in bitumen as seen by thermal and friction force microscopy and by scanning near‐filed optical microscopy10.1016/j.fuel.2015.03.043 ↗
25. Microstructural properties of warm mix asphalt before and after laboratory-simulated long-term ageing10.1080/14680629.2015.1029692 ↗
26. Newly observed effects of water on the micro-structures of bitumen surface10.1016/j.conbuildmat.2014.08.076 ↗
27. Menapace · 2014 · 157
28. Temperature and thermal history dependence of the microstructure in bituminous materials10.1016/j.eurpolymj.2013.03.027 ↗
29. On the microstructure of bituminous binders10.1080/14680629.2013.837838 ↗
30. Self-Healing of Bituminous Materials by Damage Reversal at the Microstructural Scale
31. Newly observed effects of water on the microstructures of bitumen surface10.1016/j.conbuildmat.2014.08.076 ↗
32. Effects of water exposure on bitumen surface microstructure10.1016/j.conbuildmat.2017.01.002 ↗
33. On the investigation of the bulk microstructure of bitumen – introducing two new techniques10.1016/j.fuel.2013.11.008 ↗
34. Characterization of bitumen micro-mechanical behaviors using AFM, phase dynamics theory and MD simulation
35. Amplitude Modulation (AM) Mode in Dynamic Atomic Force Microscopy
36. Bruker Nano Surfaces, Fundamentals of Contact Mode and Tapping Mode Atomic Force Microscopy, May 18 2012, https://www.azonano.com/article.aspx?ArticleID=3010, accessed on April 2018.
37. Measuring the nanomechanical properties and surface forces of materials using an atomic force microscope10.1116/1.576168 ↗
38. Probing the surface forces of monolayer films with an atomic-force microscope10.1103/PhysRevLett.64.1931 ↗
39. Force measurements with the atomic force microscope: technique, interpretation and applications10.1016/j.surfrep.2005.08.003 ↗
40. Robert A. Wilson, Heather A. Bullen, 2018. Introduction to Scanning Probe Microscopy (SPM), Basic Theory Atomic Force Microscopy (AFM), Department of Chemistry, Northern Kentucky University, Highland Heights, KY 41099, http://asdlib.org/onlineArticles/ecourseware/Bullen/SPMTheory.htm, accessed on April 2018.
41. http://www.vub.ac.be/MACH/FYSC/equipment/atomic-force-microscopy, accessed on April 2018.
42. http://www.nanophys.kth.se/nanophys/facilities/nfl/afm/fast-scan/bruker-help/Content/TappingMode%20AFM/TappingMode%20AFM.htm, accessed on April 2018.
43. http://afmhelp.com/index.php?option=com_content&view=article&id=84:what-is-phase-imaging, accessed on April 2018.
44. https://www.asylumresearch.com/Products/Mfp3DSA/Mfp3DSAProduct.shtml#Specifications, accessed on April 2018.
45. Sub-nanometer resolution imaging with amplitude-modulation atomic force microscopy in liquid
46. AFM of biological complexes: what can we learn?10.1016/j.cocis.2008.01.004 ↗
47. http://probe.olympus-global.com/en/product/omcl_ac160ts_r3/, accessed on April 2018.
48. The effect of aromatic interactions on the elasticity of bituminous binders10.1007/s00397-014-0792-0 ↗
49. Waxphaltene determinator method for automated precipitation and redissolution of wax and asphaltene components10.1021/ef300184s ↗
50. The automated asphaltene determinator coupled with saturates, aromatics, and resins separation for petroleum residua characterization10.1021/ef400952b ↗
51. Infrared spectra of high polymers. II. Polyethylene10.1063/1.1742963 ↗
52. https://imagej.nih.gov/ij/, accessed on April 2018.
53. Nahar S., Dillingh B., Erkens S., Schmets A., Fischer H., Scarpas T., 2013. Is Atomic Force Microscopy suited as Tool for fast Screening of Bituminous Materials? An Inter-laboratory Comparison Study, Conference Paper ·January 2013, http://www.asfaltblij.nl/media/1472/2012september-27-atomic-force-microscopy-bert-dillingh.pdf, (accesed on April 2018).
54. How atomic force microscopy has contributed to our understanding of polymer crystallization10.1016/j.polymer.2009.06.021 ↗
55. A new test method for determination of wax content in crude oils, residues and bitumens10.1016/j.fuel.2007.08.019 ↗