Experimental assessment on engineering properties of aged bitumen incorporating a developed rejuvenator
Source abstract
Abstract
Abstract Effectiveness of reuse of recycled asphalt pavement (RAP) to produce new asphalt mixtures for pavements not only leads to obvious environmental benefits but also significantly saves natural resources in terms of using RAP as aggregates and decreased need of using virgin bitumen. In this study, a new type of rejuvenator was developed and designed by using rubber oil, plasticizer and anti-aging agent. The experimental tests including softening point, penetration, ductility, dynamic shear rheometer (DSR), multiple stress creep recovery (MSCR), Bending-Beam Rheometer (BBR), Brookfield viscosity as well as Fourier Transformed Infrared Spectroscopy (FTIR) test were conducted to evaluate some engineering properties of the aged bitumen incorporating the developed rejuvenator and other two commercial ones. Analysis on physical and rheological properties of rejuvenated binders indicated that adopting the developed rejuvenator can restore the related properties of the aged bitumen and be able to improve the visco-elastic behavior of the rejuvenated bitumen. Meanwhile, using the developed rejuvenator can enhance thermal cracking resistance of the rejuvenated bitumen due to its improved low-temperature property. Furthermore, when assessing the aging level of the bituminous binders by FTIR, the developed rejuvenator had the potential of reducing the aging speed of the rejuvenated bitumen. Consequently, it can be concluded that the developed rejuvenator not only restored the performance of the aged bitumen to its original level, but also improved some paramount properties for pavements such as visco-elastic behavior, cracking resistance and aging resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Investigation on physical and chemical parameters to predict long-term aging of asphalt binder10.1016/j.conbuildmat.2016.06.121 ↗
2. Laboratory investigation of rejuvenator seal materials on performances of asphalt mixtures10.1016/j.conbuildmat.2012.07.008 ↗
3. Comparative life cycle assessment of asphalt pavements usingreclaimed asphalt, warm mix technology and cold in-place recycling10.1016/j.resconrec.2015.08.006 ↗
4. 100% recycled hot mix asphalt: a review and analysis10.1016/j.resconrec.2014.07.007 ↗
5. Hybrid life cycle assessment for asphalt mixtures with high RAP content10.1016/j.resconrec.2013.12.004 ↗
6. Development of a life cycle assessment tool for construction and maintenance of asphalt pavements10.1016/j.jclepro.2008.06.005 ↗
7. Performance characteristics of high reclaimed asphalt pavement containing bio-modifier10.1080/14680629.2015.1096820 ↗
8. Investigation on physical properties of waste cooking oil-Rejuvenated bitumen binder10.1016/j.conbuildmat.2012.07.042 ↗
9. Influence of short and long term aging on chemical, microstructural and macro-mechanical properties of recycled asphalt mixtures10.1016/j.conbuildmat.2013.11.004 ↗
10. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art10.1080/10298436.2014.893331 ↗
11. I.L. Al-Qadi, M.A. Elseifi, S.H. Carpenter, Reclaimed asphalt pavement: a literature review. Springfield: Illinois Center for Transportation 2007, Report Number FHWA-ICT-07-001.
12. Evaluation of hot mix asphalt mixtures with replacement of aggregates by reclaimed asphalt pavement (RAP) material10.1016/j.sbspro.2012.09.889 ↗
13. Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement10.1016/j.conbuildmat.2013.03.010 ↗
14. The use of rejuvenating agents in production of recycled hot mix asphalt: a systematic review10.1016/j.conbuildmat.2016.04.015 ↗
15. Properties of capsules containing rejuvenators for their use in asphalt concrete10.1016/j.fuel.2010.09.033 ↗
16. Material-related aspects of asphalt recycling-state-of-the-art10.1061/(ASCE)0899-1561(2006)18:1(81) ↗
17. Preparation of capsules containing rejuvenators for their use in asphalt concrete10.1016/j.jhazmat.2010.08.078 ↗
18. Effects of rejuvenating agents on superpave mixtures containing reclaimed asphalt pavement10.1061/(ASCE)0899-1561(2007)19:5(376) ↗
19. Reclaimed asphalt concretes with high recycling rates: changes in reclaimed binder properties according to rejuvenating agent10.1016/j.conbuildmat.2012.11.031 ↗
20. Evaluating the effect of rejuvenators on the degree of blending and performance of high RAP, RAS, and RAP/RAS mixtures10.1080/14680629.2013.812836 ↗
21. Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen10.1016/j.jhazmat.2012.06.021 ↗
22. Impact of rejuvenators on aging properties of bitumen10.1016/j.conbuildmat.2015.07.030 ↗
23. Standard Test Method of Bitumen and Bituminous Mixtures for Highway Engineering JTG E20-2011. Research Institute of Highway, China Ministry of Transport. China communication press 2011.
24. Analytical investigation of the impact of a novel bio-based recycling agent on the colloidal stability of aged bitumen10.1080/14680629.2017.1304257 ↗
25. Use of modified slow tire pyrolysis product as a rejuvenator for aged bitumen10.1016/j.conbuildmat.2016.05.140 ↗
26. Microstructures and thermal aging mechanism of expanded vermiculite modified bitumen10.1016/j.conbuildmat.2013.05.099 ↗
27. Read · 2003
28. Rheological properties of styrene-butadiene-styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
29. Effect of hydration and silicone resin on Basic Oxygen Furnace slag and its asphalt mixture10.1016/j.jclepro.2015.09.041 ↗
30. Practical use of multiple stress creep and recovery test10.3141/2126-09 ↗
31. Analysis of the influence of binder properties on the mechanical response of bituminous mixtures10.1080/10298436.2015.1057138 ↗
32. Refinement of the superpave specification parameter for performance grading of asphalt10.1061/(ASCE)0733-947X(2001)127:5(357) ↗
33. Implementing viscoelastic rheological methods to evaluate low temperature performance of modified asphalt binders10.1016/j.conbuildmat.2012.04.076 ↗
34. FTIR and rheology analysis of aging on different ultraviolet absorber modified bitumens10.1016/j.conbuildmat.2016.04.040 ↗
35. Influence of thermo-oxidative aging on chemical composition and physical properties of polymer modified bitumens10.1016/j.conbuildmat.2011.06.033 ↗
36. Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods10.1016/j.conbuildmat.2011.06.048 ↗
37. Effects of steel slag fillers on the rheological properties of asphalt mastic10.1016/j.conbuildmat.2017.04.034 ↗
38. Application of bitumen rheological parameters to predict thermal cracking behavior of polymer modified asphalt mixture10.1016/j.conbuildmat.2014.05.070 ↗
39. Laboratory evaluation of antioxidants for asphalt binders10.1016/j.conbuildmat.2010.06.058 ↗