Response of high-strength reinforced concrete beams under shock-tube induced blast loading
Source abstract
Abstract
Abstract This paper presents the results of study examining the blast performance of reinforced concrete beams constructed with high-strength concrete (HSC). As part of the experimental program, a series of five beams are tested under simulated blast loading using a high-capacity shock-tube at the University of Ottawa. Parameters investigated include the effect of concrete strength, shear reinforcement and longitudinal reinforcement ratio. The effect of loading rate is investigated by testing a companion set of five beams with identical properties under slowly applied (quasi-static) loading. The results show that increasing the reinforcement ratio improves the blast performance of HSC beams by increasing overall blast capacity and reducing maximum and residual displacements at equivalent blast loads. The effect of concrete strength on blast performance is found to be more limited, with companion normal-strength and high-strength concrete beams showing similar performance. The results also confirm the importance of providing transverse reinforcement to prevent blast-induced shear failures in HSC beams. As part of the analytical study, the blast response of the HSC beams is predicted using dynamic inelastic single-degree-of-freedom (SDOF) analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Canadian Standards Association (CSA), Design and assessment of buildings subjected to blast loads, CSA S850-12, Mississauga, ON, Canada, 2012.
2. ACI Committee 363 · 2005
3. Wu · 2005 · 421
4. Task Group 4, Report on structural design and detailing for high-strength concrete in moderate to high seismic applications, ITG-4.3R07
5. Code provisions for high strength concrete—an international perspective
6. Reinforced high-strength concrete beams in flexure
7. Plastic analysis of HSC beams in flexure10.1617/s11527-008-9366-x ↗
8. High strength concrete: an investigation of the flexural behaviour of high strength RC beams
9. Effect of compressive strength and tensile reinforcement ratio on flexural behavior of high-strength concrete beams10.1016/S0141-0296(98)00135-7 ↗
10. The ductile behaviour including flexural strength of high-strength concrete members subjected to flexure
11. Impact resistance of reinforced and prestressed concrete members10.1007/BF02476329 ↗
12. State-of-the-art review on low-velocity impact response of reinforced concrete beams10.1680/jmacr.15.00084 ↗
13. Impact behaviour of prestressed concrete beams in flexure10.1680/macr.1984.36.128.157 ↗
14. Banthia · 1987
15. Non-linear dynamic analysis and design concepts for RC beams under impulsive loads10.5459/bnzsee.22.2.98-111 ↗
16. The behaviour of RC columns under impact loading
17. Reinforced concrete beams under drop-weight impact loads10.12989/cac.2006.3.2_3.079 ↗
18. Failure behaviors of reinforced concrete beams subjected to high impact loading10.1016/j.engfailanal.2015.02.006 ↗
19. Experimental investigation of the behaviour of concrete beams reinforced with GFRP bars under static and impact loading10.1016/j.engstruct.2016.01.044 ↗
20. High strength and reactive powder concrete columns subjected to impact: experimental investigation10.1016/j.conbuildmat.2015.01.026 ↗
21. Response of ultra-high-performance fiber-reinforced concrete beams with continuous steel reinforcement subjected to low-velocity impact loading10.1016/j.compstruct.2015.02.058 ↗
22. Impact resistance of reinforced ultra-high-performance concrete beams with different steel fibers10.14359/51689430 ↗
23. Response of high-strength concrete to dynamic compressive loading10.1016/j.ijimpeng.2017.04.015 ↗
24. A rate dependent stress-strain relationship model for normal, high and ultra-high strength concrete10.1260/2041-4196.4.3.451 ↗
25. Feldman · 1962 · 354
26. Keenan · 1963
27. Air-blast-loaded, high-strength concrete beams. Part I: Experimental investigation10.1680/macr.2008.62.2.127 ↗
28. Experimental study on scaling of RC beams under close-in blast loading10.1016/j.engfailanal.2013.06.020 ↗
29. A fundamental investigation of reinforced concrete beams subjected to close-in explosion
30. Numerical analysis of prestressed reinforced concrete beam subjected to blast loading10.1016/j.matdes.2014.09.033 ↗
31. Numerical simulation on dynamic behavior of reinforced concrete beam with initial cracks subjected to air blast loading10.1016/j.engstruct.2016.09.032 ↗
32. RC beams under blast load: Reliability and sensitivity analysis10.1016/j.engfailanal.2016.05.003 ↗
33. Capabilities and effectiveness of using a shock tube to simulate blast loading on structures and structural components
34. Jacques · 2016
35. Experimental and analytical investigation of FRP retrofitted glued-laminated beams subjected to simulated blast loading10.1061/(ASCE)ST.1943-541X.0002084 ↗
36. Experimental and analytical investigation of cross-laminated timber panels subjected to out-of-plane blast loads10.1061/(ASCE)ST.1943-541X.0001915 ↗
37. Effects of high strain rates on the response of glulam beams and columns10.1061/(ASCE)ST.1943-541X.0002020 ↗
38. Response of SFRC columns under blast loads10.1061/(ASCE)ST.1943-541X.0001186 ↗
39. An experimental investigation on the effect of steel reinforcement on impact response of reinforced concrete plates10.1016/j.ijimpeng.2015.08.015 ↗
40. Compressive behaviour of concrete at high strain rates10.1007/BF02472016 ↗
41. Effects of high loading rate on reinforced concrete beams
42. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
43. Predicting reinforced concrete response to blast loads10.1139/L2012-014 ↗
44. Review of static and dynamic properties of steel reinforcing bars
45. Comite Euro-International Du Beton
46. Review of strain rate effects for concrete in tension
47. M. Saatcioglu, A. Lloyd, E. Jacques, A. Braimah, G. Doudak, Focused research for development of a CSA standard on design and assessment of buildings subjected to blast loads, Interim report submitted to Public Works and Government Services Canada, Hazard Mitigation and Disaster Management Research Centre, University of Ottawa, Ottawa, Canada, 2011, p. 124.
48. E. Jacques, RCBLAST version. 0.5.1. http://www.rcblast.ca, 2014.