Experimental and numerical investigation on I–II mixed-mode fracture of concrete based on the Monte Carlo random aggregate distribution
Source abstract
Abstract
Abstract This paper presents the result of an experimental and numerical investigation on I–II mixed-mode meso-scale fracture behavior of concrete by the Monte Carlo Simulation (MCS) random aggregate numerical simulation method, involving the tests of 6 four-point shear notched concrete beams with different coarse aggregate. Simultaneously, the effects of volume fraction and specific surface area (SSA) of coarse aggregate on fracture characteristics and peak load were discussed at the meso-level. The results showed that the crack growth patterns of four-point bending concrete beams with separate coarse aggregate volume fraction and SSA were basically consistent under the same loading condition. The actual path of fracture propagation is determined by the difference of the aggregate distribution, and with an increase in the volume fraction of coarse aggregate, the fracture surface is rougher, and I–II mixed-mode fracture of concrete required more fracture energy, which is corresponded to a higher peak load. Also, with an increase in the proportion of small size coarse aggregate, the contact surface area between aggregate and mortar increases, and consequently, peak load increased by the proportion of small size coarse aggregate increase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Numerical methods in engineering · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters10.1016/j.conbuildmat.2017.11.141 ↗
2. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
3. Effect of type of coarse aggregate on the strength properties and fracture energy of normal and high strength concrete10.1016/j.engfracmech.2018.02.029 ↗
4. Generalized fracture toughness and compressive strength of sustainable concrete including low calcium fly ash10.3390/ma10121393 ↗
5. A comparative study on stress intensity factor-based criteria for the prediction of mixed mode I-II crack propagation in concrete
6. Multiscale fracture simulation of three-point bending asphalt mixture beam considering material heterogeneity10.1016/j.engfracmech.2011.06.001 ↗
7. Pore space and brittle damage evolution in concrete10.1016/j.engfracmech.2013.05.007 ↗
8. Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete10.1016/j.engfracmech.2014.10.016 ↗
9. Numerical modeling tensile failure behavior of concrete at mesoscale using extended finite element method10.1177/1056789513516028 ↗
10. Monte Carlo simulations of mesoscale fracture of concrete with random aggregates and pores: a size effect study10.1016/j.conbuildmat.2015.02.002 ↗
11. Computational technology for analysis of 3D meso-structure effects on damage and failure of concrete10.1016/j.ijsolstr.2015.11.018 ↗
12. Effect of aggregate on the fracture behavior of high strength concrete10.1016/j.conbuildmat.2004.04.013 ↗
13. Wedge splitting test on fracture behavior of ultrahigh strength concrete10.1016/j.conbuildmat.2004.04.016 ↗
14. Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2009.02.038 ↗
15. Interpretation of aggregate volume fraction effects on fracture behavior of concrete10.1016/j.conbuildmat.2011.08.080 ↗
16. Evaluation of the effect of maximum aggregate size on fracture behavior of self compacting concrete10.1016/j.conbuildmat.2014.01.065 ↗
17. Investigation of effects of aggregate size on the fracture behavior of high performance concrete by acoustic emission10.1016/j.conbuildmat.2006.05.030 ↗
18. Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete10.1016/j.conbuildmat.2016.07.061 ↗
19. Evaluation of morphology and size of cracks of the Interfacial Transition Zone (ITZ) in concrete containing fly ash (FA)10.1016/j.jhazmat.2018.06.016 ↗
20. Experiment techniques on structures and performances of interface transition zone between mortar and aggregates in cement concrete
21. Quantification of the influences of aggregate shape and sampling method on the overestimation of ITZ thickness in cementitious materials10.1016/j.powtec.2017.12.008 ↗
22. Influence of the interfacial transition zone and microcracking on the diffusivity, permeability and sorptivity of cement-based materials after drying10.1680/macr.2008.61.8.571 ↗
23. Numerical study of ITZ contribution on mechanical behavior and diffusivity of mortars10.1016/j.commatsci.2015.02.016 ↗
24. Modeling of the quasibrittle fracture of concrete at meso-scale: effect of classes of aggregates on global and local behavior10.1016/j.cemconres.2016.07.010 ↗
25. Influence of recycled coarse aggregates incorporation on the fracture properties of concrete10.1016/j.conbuildmat.2017.07.183 ↗
26. Monte Carlo simulations of meso-scale dynamic compressive behavior of concrete based on X-ray computed tomography images10.1016/j.ijimpeng.2016.06.009 ↗
27. Mesoscale fracture analysis of multiphase cementitious composites using peridynamics10.3390/ma10020162 ↗
28. Adaptive crack modeling with interface solid elements for plain and fiber reinforced concrete structures10.3390/ma10070771 ↗
29. Computer simulation of fracture processes of concrete using mesolevel models of lattice structures10.1016/j.cemconres.2003.11.011 ↗
30. Evaluation of the effect of maximum aggregate size on fracture behavior of self-compacting concrete10.1016/j.conbuildmat.2014.01.065 ↗
31. Size-effect method for determining fracture energy and process zone size of concrete10.1007/BF02472030 ↗
32. Discrete element modeling to predict the modulus of asphalt concrete mixtures10.1061/(ASCE)0899-1561(2004)16:2(140) ↗
33. Concrete mechanics. Part A: theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subjected to shear loading
34. Characterization of pore structure and crack propagation in concrete using X-ray
35. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
36. Plastic-damage model for cyclic loading of concrete structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
37. Numerical simulation of dynamic tensile-failure of concrete at meso-scale10.1016/j.ijimpeng.2013.12.005 ↗
38. 3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model10.1016/j.ijsolstr.2015.05.002 ↗
39. Finite element modeling of intermediate crack debonding in FRP-plated RC beams10.1061/(ASCE)CC.1943-5614.0000157 ↗
40. Experimental and numerical studies of size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams10.1016/j.conbuildmat.2013.07.061 ↗
41. Chapter 5 – multiaxial strength and constitutive relation10.1016/B978-0-12-800859-1.00005-0 ↗
42. Tensile and tensile fatigue behaviour of concrete; experiments, modelling and analyses
43. Damage distribution and size effect in numerical concrete from lattice analyses10.1016/j.cemconcomp.2011.01.008 ↗
44. Modeling of phase interfaces during pre-critical crack growth in concrete10.1016/j.cemconcomp.2011.01.007 ↗
45. Monte Carlo simulation of complex 2D cohesive fracture in random heterogeneous quasi-brittle materials10.1016/j.ijsolstr.2010.04.031 ↗
46. Su · 2009 · 3222
47. Effect of fracture path on the fracture energy of high-strength concrete10.1016/S0008-8846(01)00610-X ↗
48. Fracture energy and softening behavior of high-strength concrete10.1016/S0008-8846(01)00667-6 ↗
49. Determining the impact behavior of concrete beams through experimental testing and meso-scale simulation: II. Particle element simulation and comparison10.1016/j.engfracmech.2014.12.020 ↗