Effects of rotational shearing on rheological behavior of fresh mortar with short glass fiber
Source abstract
Abstract
Abstract Shear stresses are always applied to fresh concrete during mixing and transporting processes, which have significant influences on the dispersion and agglomeration of cement particles. In this study, the effects of rotational shear mixing on rheological properties of fresh short glass fiber reinforced mortars with different mineral admixtures (containing fly ash and silica fume) were experimentally investigated. The shear rates of 50 s−1, 100 s−1 and 150 s−1 were selected as the rotational shearing rates. The Herschel-Bulkley model was used to characterize the rheological behavior of fresh glass fiber reinforced mortar. Results showed that the shear-thickening intensity increased with the increase of glass fiber volume fraction for the cement-fly ash binary mortar, while the addition of glass fiber resulted in the rheological behavior of cement-silica fume binary mortar changed from shear-thickening to shear-thinning response. After subjecting to rotational shear mixing, the measured shear stress was significantly increased and the fresh mortars with glass fibers easily showed shear-thickening behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A thixotropy model for fresh fluid concretes: theory, validation and applications10.1016/j.cemconres.2006.05.025 ↗
2. Analysis of shear rate inside a concrete truck mixer10.1016/j.cemconres.2017.02.007 ↗
3. Changes in concrete properties during pumping and formation of lubricating material under pressure10.1016/j.cemconres.2018.03.018 ↗
4. Pumping of fresh concrete: insights and challenges10.21809/rilemtechlett.2016.15 ↗
5. Flows of materials with yield10.1122/1.549926 ↗
6. R. Helmuth, L.M. Hills, D.A. Whiting, et al., Abnormal concrete performance in the presence of admixtures, 1995.
7. The influence of mineral admixtures on the rheology of cement paste and concrete10.1016/S0008-8846(00)00454-3 ↗
8. The influence of mixing on the rheology of fresh cement paste10.1016/S0008-8846(99)00124-6 ↗
9. Effect of mixing method on microstructure and rheology of cement paste10.1016/j.conbuildmat.2015.05.124 ↗
10. Influence of high mixing intensity on rheology, hydration, and microstructure of fresh state cement paste10.1016/j.cemconres.2016.03.004 ↗
11. Coupled effect of time and temperature on variations of yield value of highly flowable mortar10.1016/j.cemconres.2005.11.001 ↗
12. Coupled effect of time and temperature on variations of plastic viscosity of highly flowable mortar10.1016/j.cemconres.2008.12.007 ↗
13. Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC10.1016/j.conbuildmat.2012.12.050 ↗
14. Effectiveness of rotational shear in dispersing concentrated cement suspensions
15. Drying shrinkage of concrete reinforced with fibers and welded-wire fabric
16. Permeability of cracked hybrid fiber-reinforced mortar under load
17. P.N. Balaguru, S.P. Shah, Fiber-reinforced cement composites, 1992.
18. An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete10.1016/j.matdes.2013.03.046 ↗
19. Impact resistance of steel fiber reinforced concrete
20. Rheology of fiber-reinforced cementitious materials10.1016/j.cemconres.2006.10.015 ↗
21. Development of thin FRP reinforced GFRC permanent formwork systems10.1016/j.conbuildmat.2007.07.029 ↗
22. Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)10.1016/j.engfailanal.2011.01.004 ↗
23. The effect of mixing on the performance of macro synthetic fibre reinforced concrete10.1016/j.cemconres.2017.10.010 ↗
24. Standard · 2007
25. Applicability of rheological models to highperformance grouts containing supplementary cementitious materials and viscosity enhancing admixture10.1007/BF02481066 ↗
26. Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction10.1016/j.cemconres.2004.02.020 ↗
27. Measuring rheological properties of cement pastes: most common techniques, procedures and challenges
28. Fresh concrete: a Herschel-Bulkley material10.1007/BF02480474 ↗
29. Effect of constituents on rheological properties of fresh concrete-a review10.1016/j.cemconcomp.2017.07.016 ↗
30. Effects of ultra-fine materials on workability and strength of concrete containing alkali-activated slag as the binder10.1016/S0008-8846(98)00237-3 ↗
31. Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete10.1016/j.conbuildmat.2015.03.061 ↗
32. Fresh self compacting concrete, a shear thickening material10.1016/j.cemconres.2008.02.008 ↗
33. Why is fresh self-compacting concrete shear thickening?10.1016/j.cemconres.2009.03.004 ↗
34. Rheology of low carbon fibre content reinforced cement mortar10.1016/j.cemconcomp.2006.06.004 ↗
35. Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC10.1016/j.conbuildmat.2017.04.181 ↗
36. Study of the shear thickening effect of superplasticizers on the rheological behaviour of cement pastes containing or not mineral additives10.1016/S0008-8846(00)00330-6 ↗
37. Shear-thickening (“Dilatancy”) in suspensions of nonaggregating solid particles dispersed in Newtonian liquids10.1122/1.550017 ↗
38. Shear-thickening behavior of high-performance cement grouts—influencing mix-design parameters10.1016/j.cemconres.2010.11.004 ↗
39. Effect of solid concentration and shear rate on shear-thickening response of high-performance cement suspensions10.1016/j.conbuildmat.2013.10.078 ↗
40. Rheological behavior of high performance concrete with mineral admixtures and their blending10.1016/j.conbuildmat.2007.10.004 ↗
41. The effect of ultra-fine admixture on the rheological property of cement paste10.1016/S0008-8846(00)00236-2 ↗
42. The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars10.1016/j.cemconres.2006.04.002 ↗
43. Thixotropy and structural breakdown properties of self consolidating concrete containing various supplementary cementitious materials10.1016/j.cemconcomp.2015.03.009 ↗
44. Rheological properties of cementitious materials containing mineral admixtures10.1016/j.cemconres.2004.11.002 ↗
45. Relationship between slump flow and rheological properties of self compacting concrete with silica fume and its permeability10.1016/j.conbuildmat.2014.08.038 ↗
46. Mixture design of concrete using simplex centroid design method10.1016/j.cemconcomp.2018.03.001 ↗
47. Mostafa · 2016
48. Influence of polymer fibers on rheological properties of cement mortars10.1515/eng-2017-0029 ↗
49. Fibre reinforcement and the rheology of concrete10.1533/9780857095282.2.229 ↗
50. How does adsorption behavior of polycarboxylate superplasticizer effect rheology and flowability of cement paste with polypropylene fiber?10.1016/j.cemconcomp.2018.11.003 ↗