journal article·2019-05

Bond performance of NSM FRP bars in concrete with an innovative additional ribs anchorage system: An experimental study

Qiang Wang, Hong Zhu, Ting Li, Gang Wu, Xiuxiu Hu

Publisher page

Abstract

Abstract Bond failure due to a lack of anchorage capacity is often observed when using FRP reinforcement as a strengthening method in RC structures, thus restricting the efficiency in upgrading their structural performance. To address this issue, our research group has recently developed a simple and innovative additional ribs anchorage system for FRP bars, which has been verified to have the high efficiency of improving the anchorage performance of FRP bars reinforced in concrete. As a promising strengthening method in RC structures, the near-surface mounted (NSM) fiber-reinforced polymer (FRP) technique has become popular. However, bond failure also exists in the NSM FRP strengthening system. It is also important to initiate a study on the bond performance of NSM FRP bars which are mounted in concrete using the proposed additional ribs. In this study, a total of 36 direct pull-out specimens and 12 beam pull-out specimens were employed. In particular, the influences of additional ribs on the bond behavior of FRP bars mounted in concrete in terms of the failure modes, local bond stress distribution, and load-slip curves were discussed. Several important parameters expected to affect the bond performance were investigated, namely, the type and the bonded length of the FRP bars, groove size and section configuration, and adhesive species. The test results and corresponding analysis in this paper demonstrated the feasibility and significant efficiency of using the proposed additional ribs anchorage system to enhance the bond performance of NSM FRP bars in concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. FRP or steel plate-to-concrete bonded joints: effect of test methods on experimental bond strength10.12989/scs.2001.1.2.231 ↗
2. Near-surface mounted FRP reinforcement: an emerging technique for strengthening structures10.1016/j.compositesb.2006.08.003 ↗
3. Debonding in RC beams shear strengthened with complete FRP wraps10.1061/(ASCE)1090-0268(2005)9:5(417) ↗
4. Effects of FRP-concrete interface bond properties on the performance of RC beams strengthened in flexure with externally bonded FRP sheets10.1061/(ASCE)0899-1561(2006)18:5(723) ↗
5. Assessing the strengthening effect of various near-surface-mounted FRP reinforcements on concrete bridge slab overhangs10.1061/(ASCE)CC.1943-5614.0000182 ↗
6. Flexural behavior of RC beams strengthened by NSM GFRP Bars having different end conditions10.1016/j.compstruct.2016.03.018 ↗
7. Nonlinear flexural response of continuous concrete slab strips strengthened with near surface-mounted composites10.1061/(ASCE)CC.1943-5614.0000730 ↗
8. Experimental and numerical study of RC beams strengthened with bottom and side NSM GFRP bars having different end conditions10.1016/j.conbuildmat.2017.05.192 ↗
9. Shear strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer rods
10. Shear strengthening of T cross section reinforced concrete beams by near-surface mounted technique10.1061/(ASCE)1090-0268(2008)12:3(300) ↗
11. Effects of NSM CFRP bars in shear strengthening of concrete members
12. Torsional strengthening of reinforced concrete beams using different configurations of NSM FRP with epoxy resins and cement-based adhesives10.1016/j.compstruct.2016.12.045 ↗
13. Seismic retrofitting of old-type RC columns with different lap splices by NSM GFRP and steel bars10.1002/tal.1413 ↗
14. Flexural retrofit of support regions of reinforced concrete beams with anchored frp ropes using nsm and ets methods under reversed cyclic loading10.1061/(ASCE)CC.1943-5614.0000732 ↗
15. Bond between near-surface mounted fiber-reinforced polymer rods and concrete in structural strengthening
16. A modified pull-out test for bond of near-surface mounted FRP rods in concrete10.1016/S1359-8368(02)00052-5 ↗
17. Experimental study of bond of NSM-FRP reinforcement10.1016/j.conbuildmat.2006.05.054 ↗
18. Anchorage and tension-stiffening effect between near-surface-mounted CFRP rods and concrete10.1016/j.cemconcomp.2010.10.016 ↗
19. Bond efficiency of EBR and NSM FRP systems for strengthening concrete members10.1061/(ASCE)CC.1943-5614.0000204 ↗
20. Bond performance of near-surface-mounted FRP bars10.1061/(ASCE)CC.1943-5614.0000150 ↗
21. Bond characteristics of various NSM FRP reinforcements in concrete10.1061/(ASCE)CC.1943-5614.0000318 ↗
22. Bond tests of short NSM-FRP and steel bar anchorages10.1061/(ASCE)1090-0268(2008)12:3(323) ↗
23. An experimental study of different factors affecting the bond of NSM FRP bars in concrete10.1016/j.compstruct.2012.12.014 ↗
24. Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete10.1016/j.conbuildmat.2012.09.015 ↗
25. Reinforced concrete beams strengthened in flexure with near-surface mounted (NSM) CFRP strips: current status and research needs10.1016/j.compositesb.2017.07.072 ↗
26. Performance and parametric analysis of flexural strengthening for RC beams with NSM-CFRP bars10.1061/(ASCE)CC.1943-5614.0000451 ↗
27. An experimental study on reinforced concrete beams strengthened with prestressed near surface mounted CFRP strips10.1016/j.engstruct.2014.08.007 ↗
28. Zhengjia. The effect of additional measures on FRP NSM strengthened concrete beams
29. Experimental study on the enhancement of additional ribs to the bond performance of FRP bars in concrete10.1016/j.conbuildmat.2018.06.198 ↗