Analysis of airfield composite pavement responses using full-scale accelerated pavement testing and finite element method
Source abstract
Abstract
Abstract This study focuses on the critical responses of airfield composite pavements that are composed of hot-mix asphalt (HMA) overlay and Portland cement concrete (PCC) pavement. Accelerated pavement testing (APT) and a finite element (FE) method were employed to investigate the effects of three influential factors: temperature, interface bonding, and load level. A full-scale test field was constructed for this study and instrumented with 20 strain gauges and 32 temperature sensors. A finite element model was developed based on the parameters derived from laboratory and field tests and the model was then validated through measurements. The results indicate that longitudinal strain is more critical than transverse strain in an HMA overlay when subjected to moving loads. Moreover, the results underscore that temperature significantly affects the responses of HMA overlays and that the relationship between temperature and pavement responses is sigmoidal. Furthermore, a good interface bonding is able to significantly reduce the critical strain in an HMA overlay and the interface bonding strength is very sensitive to the amount of tack coat. The positive strain near to the surface of HMA overlay is due to high compressive stress, which is different from the tensile strain used in fatigue testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Definition of composite pavement structures
2. Rao · 2013
3. Characterisation of interface bonding between hot-mix asphalt overlay and concrete pavements: modelling and in-situ response to accelerated loading10.1080/10298436.2011.596935 ↗
4. Pavement response and rutting for full-scale and scaled APT10.1061/(ASCE)0733-947X(2003)129:4(451) ↗
5. Measurement and analysis of early-age concrete strains and stresses: continuously reinforced concrete pavement under environmental loading10.1177/0361198106194700108 ↗
6. Characterization of environmental loads related concrete pavement deflection behavior using Light Detection and Ranging technology10.1016/j.ijprt.2017.12.003 ↗
7. Environmental Effects on the Predicted Service Life of Flexible Pavements10.1061/(ASCE)0733-947X(2007)133:1(47) ↗
8. Effect of temperature variation on pavement responses using 3D multilayered elastic analysis10.1080/10298430601116741 ↗
9. Modeling temperature distribution and thermal property of asphalt concrete for laboratory testing applications10.1016/j.conbuildmat.2009.10.013 ↗
10. Effect of temperature on the mechanical response of thermo-viscoelastic asphalt pavements10.1016/j.conbuildmat.2011.11.048 ↗
11. Comparison of response for three different composite pavement sections to environmental loads10.1080/10298436.2016.1234277 ↗
12. Structural design method of airport asphalt pavements based on time-sharing cumulation
13. Estimation of Remaining Life for Airfield Flexible Pavement Considering Environmental Factors
14. Effects of tack coat application on interface bond strength and short-term pavement performance10.3141/2633-02 ↗
15. Interface bonding between hot-mix asphalt and various Portland cement concrete surfaces: laboratory assessment10.3141/2057-06 ↗
16. Interface bonding between hot-mix asphalt and various Portland cement concrete surfaces: assessment of accelerated pavement testing and measurement of interface strain10.3141/2127-03 ↗
17. Investigation of the interface bonding between concrete slab and asphalt overlay10.1080/14680629.2017.1329866 ↗
18. Evaluation of interlayer bonding condition on structural response characteristics of asphalt pavement using finite element analysis and full-scale field tests10.1016/j.conbuildmat.2015.08.031 ↗
19. Rutting evaluation of hot and warm mix asphalt concrete under high aircraft tire pressure and temperature at national airport pavement and materials research center10.1177/0361198118794293 ↗
20. The Virginia SMART ROAD: the impact of pavement instrumentation on understanding pavement performance
21. Validation of a pavement response model using full-scale field tests10.1080/10298430290030595 ↗
22. Numerical comparison of flexible pavement dynamic response under different axles10.1080/10298436.2014.993195 ↗
23. Use of nondestructive testing in the evaluation of airport pavements
24. Dynamic analysis and in situ validation of perpetual pavement response to vehicular loading10.3141/2087-04 ↗
25. Evaluation of load transfer efficiency at joints for rigid airport pavement
26. Dynamic behavior of asphalt pavement structure under temperature-stress coupled loading10.1016/j.applthermaleng.2012.10.055 ↗
27. Methods of interconversion between linear viscoelastic material functions. Part I—a numerical method based on Prony series10.1016/S0020-7683(98)00060-2 ↗
28. Methods of interconversion between linear viscoelastic material functions. Part II—an approximate analytical method10.1016/S0020-7683(98)00055-9 ↗
29. Liao · 2014
30. Investigation of shear failure in airport asphalt pavements under aircraft ground manoeuvring10.1080/14680629.2016.1211030 ↗
31. Numerical validation of viscoelastic responses of a pavement structure in a full-scale accelerated pavement test10.1080/10298436.2015.1039003 ↗
32. Characterization of asphalt concrete layer interfaces10.3141/1778-16 ↗
33. Full-depth flexible pavement responses to different truck tyre geometry configurations10.1080/10298436.2013.775443 ↗