Bamboo joints with steel clamps capable of transmitting moment
Source abstract
Abstract
Abstract Bamboo has become a promising sustainable material for structural applications. The design of normalized efficient connections is one challenge that has to be solved to increase the use of raw bamboo in construction. Current bamboo connections are considered to be unable to transmit moment, limiting the use of the material in several applications. We propose three new beam-column bamboo connections capable of transmitting moment. Each joint is comprised of five thin steel clamps tightened around the culms, which are connected with small steel angles and platens in different configurations. Steel clamps provide great versatility and avoid premature failures. Static monotonic tests showed stiffness, strength and ductility in the ranges of 73.4–230.8 kN.m/rad, 3.4–5.2 kN.m and 3.6–17.2, respectively, for the three designs. Average stiffness and strength of these connections were at least 29% and 250% higher than those reported for conventional mortar-injected bolted connections. Cyclic tests of the connections showed hysteresis loops with pinched regions without strength degradation which is characteristic of timber connections. This study shows that clamp moment connections are a feasible alternative to improve the structural performance and versatility of bamboo structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Tree Root and Stability Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Bamboo – a miracle plant10.20546/ijcrbp.2017.401.013 ↗
2. Janssen · 2000
3. An environmental, economics and practical assessment of bamboo as a building material for supporting structures10.1016/j.conbuildmat.2005.02.023 ↗
4. Mitigation of global warming through renewable biomass10.1016/j.biombioe.2012.11.005 ↗
5. Low carbon construction using Guadua bamboo in Colombia10.4028/www.scientific.net/KEM.517.127 ↗
6. Empirically derived connection design properties for Guadua bamboo10.1016/j.conbuildmat.2017.12.065 ↗
7. Janssen · 1981
8. A new method to measure the shear modulus of bamboo10.1680/jstbu.16.00045 ↗
9. A new joint to assemble light structures of bamboo slats10.1016/j.conbuildmat.2015.08.113 ↗
10. Bamboo: functionally graded composite material
11. Propiedades físicas e mecánicas do colmo inteiro do bambu da espécie Guadua angustifólia10.1590/S1415-43662005000100016 ↗
12. Laroque · 2007
13. Hogan · 2009
14. Velez · 2013
15. Minke · 2012
16. Structural use of full culm bamboo: the path to standardization
17. Arce-Villalobos · 1993
18. Vahanvati · 2015
19. Edge bearing tests to assess the influence of radial gradation on the transverse behavior of bamboo10.1016/j.conbuildmat.2016.11.106 ↗
20. Development of a new joint for bamboo space structures
21. Limits states analysis for bamboo pin connections10.4028/www.scientific.net/KEM.517.3 ↗
22. Methods of determining transverse mechanical properties of full-culm bamboo10.1016/j.conbuildmat.2012.07.116 ↗
23. AIS · 2010
24. International Standard Organization · 2004
25. Connections between a column and its foundation for Guadua angustifolia structures under lateral loads10.4028/www.scientific.net/KEM.668.227 ↗
26. Davies · 2008
27. Camacho · 2002
28. Moreira · 2015
29. Moran · 2017
30. Morán · 2016
31. García · 2017
32. Combined culm-slat Guadua bamboo trusses10.1016/j.engstruct.2019.01.114 ↗
33. Benitez · 2017 · 75
34. Oberg · 1997
35. Experiments with rings to determine the anisotropic elastic constants of bamboo10.1016/j.conbuildmat.2011.12.089 ↗
36. Influence of age and height position on Colombian Guadua angustifolia bamboo mechanical properties
37. Hattar · 1995
38. Kracht · 2010
39. Bruhl · 2012
40. European Committee for Standardization, ENV-1993-1-1, Design of Steel Structures, London, 1993.
41. Metodología de diseño de estructuras en Guadua angustifolia como material estructural por el método de esfuerzos admisibles
42. Flexible moment connections for unbraced frames subject to lateral forces-a return to simplicity10.62913/engj.v42i2.848 ↗
43. Structural behavior of a new moment-resisting DfD concrete connection10.1016/j.engstruct.2016.11.019 ↗
44. Moment-resisting bolted timber connections10.1680/stbu.2010.163.4.267 ↗
45. International Organization of Standardization, ISO 16670: Timber Structures – Joints Made with Mechanical Fasteners – Quasi-Static Reversed-Cyclic Test Method, Geneva, 2003.
46. AISC, American Institute of Steel Construction, Facts for Steel Buildings. Earthquakes and Seismic Design, 2009