Manufactured structural timber building materials and their durability
Source abstract
Abstract
Abstract The use of sustainably grown trees and subsequent wood products in built environment contribute towards sustainable future. With proven improved performance in fire and seismic characteristic, the projected market potential for softwood Engineered Wood Products such as CLT (Cross Laminated Timber) and LVL (Laminated Veneer Lumber) for multi-story buildings are very positive. However, potential prolonged rain leakage or moisture exposure during construction and in-service could pose considerable concern for its durability and reputation. This research was conducted to assess the decay resistance of LVL, OSB (Oriented Strand Board) and CLT produced from radiata pine in an accelerated trial. This testing method is used in establishing the effectiveness of wood products in framing subject to intermittent wetting. The results showed untreated OSB and CLT were very susceptible to decay. In comparison, LVL was less susceptible. Testing conducted on CLT using surface application of boron preservative prevented decay. Further work is needed to understand the full extent of moisture ingress in wooden panels during construction and service of the multi-story buildings and improving the durability of panel products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. ASTM International (2006). Standard test method of evaluating wood preservatives by field tests with stakes. ASTM D-1758.
2. Australasian Wood Preservation Committee (2015). Protocols for assessment of wood preservatives.
3. Australia/New Zealand Standard 2012: AS/NZS 1604.4: Specification for preservative treatment, Part 4, Laminated veneer lumber (LVL).
4. Cross laminated timber (CLT): overview and development10.1007/s00107-015-0999-5 ↗
5. Multi-storey prestressed timber buildings in New Zealand10.2749/101686608784218635 ↗
6. Fire safety of CLT buildings in New Zealand and Australia10.22382/wfs-2018-043 ↗
7. J .Burgess, N. Buckett, I. Page (2013). Prefabrication impacts in the New Zealand construction industry. BRANZ study report 279.
8. D. Dirol (1988) Borate diffusion in wood from rods and liquid product application to laminated beams. Stockholm: The International Research Group on Wood Protection, IRG/WP/3482.
9. P. Fast, B. Gafner, R. Jackson, J. Li (2016). Case study: An 18 story tall mass timber hybrid student residence at the University of British Columbia, Vancouver. Proc. Wood Conference on Timber Engineering, August 22-25, 2016, Vienna, Austria.
10. Cross-laminated timber: status and research needs in Europe
11. Gagnon · 2011
12. M.E. Hedley, D. Page, J. van der Waals, 2009. Application of borocol 200RH (Framesaver) to control decay on pre-decayed model frame units. Scion Wood Processing Newsletter Issue No. 43, September 2009.
13. Hunn · 2002
14. Modern structural wood products10.1002/pse.79 ↗
15. Timber construction engineering for multiple story buildings10.1002/bate.201600063 ↗
16. Effectiveness of on-site remediation treatments for framing timber10.1016/j.ibiod.2013.09.003 ↗
17. The development of accelerated test methods to evaluate the durability of framing timber10.1016/j.ibiod.2014.04.029 ↗
18. Remedial Boron treatment of difficult to access timber in buildings10.1007/s00107-016-1061-y ↗
19. Efficacy of essential oil extracts in inhibiting mould growth on panel products10.1016/j.buildenv.2010.03.010 ↗
20. Standards New Zealand (2003). NZS 3640, Chemical Preservation of Round and Sawn Timber. Wellington.
21. Standards New Zealand (2003). NZS 3602, Timber and Wood-based Products for Use in Building. Wellington.
22. Urban equilibrium for sustainable cities and the contribution of timber buildings to balance urban carbon emissions: a New Zealand case study10.1016/j.jclepro.2016.12.020 ↗
23. Hygrothermal performance of cross-laminated timber wall assemblies: a stochastic approach10.1016/j.buildenv.2015.11.034 ↗
24. Durability of mass timber structure: a review of the biological risks10.22382/wfs-2018-045 ↗