journal article·2019-10

Influence of TiO2 incorporation methods on NOx abatement in Engineered Cementitious Composites

Mingfeng Xu, Yi Bao, Kai Wu, Tian Xia, Herek L. Clack, Huisheng Shi, Victor C. Li

Publisher page

Abstract

Abstract Titanium dioxide (TiO2) nanoparticles have been incorporated in concrete to impart photocatalytic (PC) properties, such as the self-cleaning and air purification functionalities, which are dependent on PC reactions near the exterior surfaces of the concrete exposed to light. This study experimentally investigates the effect of three TiO2 incorporation methods and surface patterns on the air-purifying functionality and mechanical properties of PC Engineered Cementitious Composites (PC-ECC). The air-purifying functionality was evaluated by measuring the nitrogen oxides (NOx) concentration change with the presence of PC-ECC plate specimens exposed to ultraviolet (UV) irradiation; uniaxial tensile and four-point bending tests were conducted to evaluate the tensile and flexural properties of the PC-ECC plates; scanning electron microscopy (SEM) was used to characterize the surface morphology of the plates; energy dispersive spectroscopy (EDS) was used to map the element distribution on the surface. Test results indicate that the amount of TiO2 nanoparticles is reduced by 90% when TiO2 is incorporated through a thin layer on the exterior surface of the ECC plate, while PC functionality and mechanical properties are retained. Incorporating TiO2 through polyurethane coating reduces the NOx abatement efficiency by 70–80%, compared with directly mixing the TiO2 nanoparticles in ECC. The reduced PC efficiency is attributed to the dense microstructure and low alkali content of the coating. This study advances the fundamental knowledge for designing functionally graded PC concrete with optimized PC efficiency and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Continental, Worldwide emission standards and related regulations, 2017.
2. Interaction of NOx reduction and soot oxidation in a DPF with Cu-zeolite SCR coating10.1007/s40825-015-0014-y ↗
3. Emissions treatment system with lean NOx trap
4. of Global Air
5. Seinfeld · 2012
6. Photocatalytic NOx degradation of concrete surface layers intermixed and spray-coated with nano-TiO2: Influence of experimental factors10.1016/j.cemconcomp.2017.07.022 ↗
7. Photocatalytic NOx abatement by calcium aluminate cements modified with TiO2: Improved NO2 conversion10.1016/j.cemconres.2015.01.011 ↗
8. Incorporation of titanium dioxide nanoparticles in mortars - Influence of microstructure in the hardened state properties and photocatalytic activity10.1016/j.cemconres.2012.09.007 ↗
9. TiO2 photocatalysis in cementitious systems: Insights into self-cleaning and depollution chemistry10.1016/j.cemconres.2011.12.001 ↗
10. Photocatalytic construction and building materials: from fundamentals to applications10.1016/j.buildenv.2009.01.002 ↗
11. Photocatalytic oxidation of NO x gases using TiO 2: a surface spectroscopic approach10.1016/S0269-7491(02)00107-0 ↗
12. Full scale demonstration of air-purifying pavement10.1016/j.jhazmat.2013.02.012 ↗
13. Photocatalytic degradation of NOx in a pilot street canyon configuration using TiO2-mortar panels
14. On engineered cementitious composites (ECC)10.3151/jact.1.215 ↗
15. A strain-hardening cementitious composites with the tensile capacity up to 8%10.1016/j.conbuildmat.2017.01.060 ↗
16. Ductile concrete material with self-healing capacity for jointless concrete pavement use10.3141/2640-09 ↗
17. Engineered cementitious composites (ECC)-material, structural, and durability performance
18. Self-cleaning engineered cementitious composites10.1016/j.cemconcomp.2015.09.007 ↗
19. M. Xu, H. Clack, T. Xia, Y. Bao, K. Wu, H. Shi, V. Li, Effect of TiO2 and Fly Ash on Photocatalytic NOx Abatement of Engineered Cementitious Composites, Composites Part B: Engineering (submitted).
20. Solar photocatalysis: Materials, reactors, some commercial, and pre-industrialized applications10.1016/j.apcatb.2014.12.050 ↗
21. Beeldens · 2006
22. Superior photocatalytic NOx removal of cementitious materials prepared with white cement over ordinary Portland cement and the underlying mechanisms10.1016/j.cemconcomp.2018.03.020 ↗
23. The nitric oxide ISO photocatalytic reactor system: Measurement of NOx removal activity and capacity10.1016/j.jphotochem.2015.03.002 ↗
24. Performance of photocatalytic cementitious material: Influence of substrate surface microstructure, Construction and Building Materials 110(Supplement
25. Titania-silica nanocomposite photocatalysts with application in stone self-cleaning10.1021/jp2074623 ↗
26. Photocatalytic abatement of NOx pollutants in the air using commercial functional coating with porous morphology10.1016/j.apcatb.2017.06.009 ↗
27. Nano-TiO2/polyurethane composites for antibacterial and self-cleaning coatings10.1088/0957-4484/23/42/425606 ↗
28. Roles of anatase and rutile TiO2 nanoparticles in photooxidation of polyurethane10.1016/j.polymertesting.2006.10.002 ↗
29. Photocatalytic pavements with epoxy-bonded TiO2-containing spreading material, Construction and Building Materials 107(Supplement
30. A novel TiO2–SiO2 nanocomposite converts a very friable stone into a self-cleaning building material10.1016/j.apsusc.2012.10.142 ↗
31. Influence of micro-cracking on the composite resistivity of engineered cementitious composites10.1016/j.cemconres.2014.01.002 ↗
32. Influence of micro-cracking on the permeability of engineered cementitious composites10.1016/j.cemconcomp.2016.05.016 ↗
33. Multiscale investigation of tensile properties of a TiO2-doped Engineered Cementitious Composite10.1016/j.conbuildmat.2019.03.112 ↗
34. ASTM C1437-15, Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, 2015
35. Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays10.1016/j.cemconres.2013.05.019 ↗
36. Committee · 2008
37. A. Mills, L. Burns, C. O’Rourke, S. Elouali, Kinetics of the photocatalysed oxidation of NO in the ISO 22197 reactor, Journal of Photochemistry and Photobiology A: Chemistry 321(Supplement C) (2016) 137-142.10.1016/j.jphotochem.2016.01.010 ↗
38. Functionalized building materials: Photocatalytic abatement of NOx by cement pastes blended with TiO2 nanoparticles10.1016/j.conbuildmat.2012.06.017 ↗
39. Experimental study of photocatalytic concrete products for air purification10.1016/j.buildenv.2009.04.010 ↗