Optimization of production parameters of geopolymer mortar and concrete: A comprehensive experimental study
Source abstract
Abstract
Abstract Geopolymers are a new type of material offered as an alternative to traditional Portland cement. Geopolymers, produced by activation of natural and waste pozzolans with alkali activators such as NaOH (SH) and Na2O·3SiO2 (SS) solutions, have been widely supported and investigated due to environmental and economic advantages. In this study, a detailed experimental program was conducted to investigate the influence of activator type, activator concentration and curing temperature on mechanical and microstructural properties of volcanic tuff based geopolymer mortar (GPM) and concrete (GPC) samples. A total of 1080 GPM and GPC samples were produced and a number of parameters were investigated with 360 combinations. Maximum compressive strength was obtained as 37.09 MPa in 90-day samples in which the SH concentration was 16 M, activator/binder (a/b) ratio was 0.45 and the curing temperature was 120 °C. As a result of optimization of the production parameters, a considerable development in mechanical and microstructural properties of GPM and GPC samples was obtained. Experimental results demonstrated that alkali activation with sole SH bring about superior characteristics compared to alkali activation with SH + SS. Higher a/b ratio led to higher UPV values because of more dense and compact microstructure resulting from increase in gopolymerization reactions. This is also supported by compressive strength and microstructure findings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Usage of green concrete technology in civil engineering10.1016/j.proeng.2015.10.039 ↗
2. Choate · 2003
3. USGS. United States Geological Survey Mineral Commodity Summaries – Cement 2014. https://minerals.usgs.gov/minerals/pubs/mcs/2014/mcs2014.pdf.
4. High-alkali cements for 21st century concretes
5. Making concrete “greener” with fly ash
6. Cement industry greenhouse gas emissions-management options and abatement cost10.1016/j.jclepro.2015.07.055 ↗
7. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
8. Discussion on properties and microstructure of geopolymer concrete containing fly ash and recycled aggregate10.4028/www.scientific.net/AMR.450-451.1577 ↗
9. Wallah · 2006
10. Utilization of some industrial wastes for eco-friendly cement production
11. Syntheses, characterization and binding strength of geopolymers: a review
12. Building durable structures in the 21st century
13. Hardjito · 2005
14. Understanding carbon lock-in10.1016/S0301-4215(00)00070-7 ↗
15. The future of construction materials research and the seventh UN Millennium Development Goal: a few insights10.1016/j.conbuildmat.2012.11.007 ↗
16. Why more sustainable cements failed so far? Disruptive innovations and their barriers in a basic industry10.1016/j.eist.2015.10.001 ↗
17. Geopolymers: Inorganic polymeric new materials10.1007/BF01912193 ↗
18. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
19. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
20. Provis · 2014
21. High performance cementing materials from industrial slags-a review10.1016/S0921-3449(99)00060-9 ↗
22. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
23. Shi · 2006
24. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
25. Tennakoon · 2016
26. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
27. Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes10.1016/j.conbuildmat.2017.04.036 ↗
28. Long Term Durability of Hazardous Toxic and Nuclear Waste Disposals
29. Geopolymeric concretes for environmental protection
30. Production of geopolymer concrete using natural pozzolan: a parametric study10.1016/j.conbuildmat.2016.04.011 ↗
31. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements10.1016/S0008-8846(01)00724-4 ↗
32. Chemical interactions between siliceous aggregates and low-Ca alkali-activated cements10.1016/j.cemconres.2007.03.012 ↗
33. Chemistry of geopolymeric systems, terminology
34. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
35. The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures10.1016/j.compositesb.2013.10.082 ↗
36. Geopolymer manufacture and application-main problems when using concrete technology
37. The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers10.1016/j.cemconcomp.2011.03.006 ↗
38. Alkali-activated fly ash-based geopolymers with zeolite or bentonite as additives10.1016/j.cemconcomp.2009.07.006 ↗
39. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites10.1016/j.cemconcomp.2012.11.010 ↗
40. Properties of geopolymer with seeded fly ash and rice husk bark ash10.1016/j.msea.2011.06.027 ↗
41. Production of eco-friendly bricks from copper mine tailings through geopolymerization10.1016/j.conbuildmat.2011.10.048 ↗
42. An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products10.1016/j.conbuildmat.2014.12.065 ↗
43. Characterisation of fly ashes. Potential reactivity as alkaline cements10.1016/S0016-2361(03)00194-7 ↗
44. Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash10.1016/j.ceramint.2011.05.002 ↗
45. Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludge10.1016/j.conbuildmat.2015.02.040 ↗
46. Mechanical properties of alkali activated fly ash/Kaolin based geopolymer concrete10.1016/j.conbuildmat.2015.08.009 ↗
47. Recent developments on inorganic polymers synthesis and applications10.1016/j.ceramint.2016.07.027 ↗
48. The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar10.1016/j.matdes.2013.11.080 ↗
49. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar10.1016/j.matdes.2014.03.037 ↗
50. The mechanical properties of fly ash-based geopolymer concrete with alkaline activators10.1016/j.conbuildmat.2013.05.069 ↗
51. Recycling of the product of thermal inertization of cement-asbestos in geopolymers10.1016/j.conbuildmat.2011.12.087 ↗
52. Mechanical properties and durability of volcanic ash based geopolymer mortars10.1016/j.conbuildmat.2016.07.141 ↗
53. TS EN 1008 · 2003
54. Durability of fly ash based geopolymer concrete in the presence of silica fume10.1016/j.jclepro.2017.02.176 ↗
55. Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures10.1016/j.conbuildmat.2015.07.006 ↗
56. Alkali-activated fly ash: effect of thermal curing conditions on mechanical and microstructural development–part II10.1016/j.fuel.2006.07.010 ↗
57. TS EN 12390-3 · 2010
58. ASTM C597-16 · 2016
59. Effects of modulus ratio and dosage of alkali-activated solution on the properties and micro-structural characteristics of alkali-activated fly ash mortars10.1016/j.conbuildmat.2015.09.029 ↗
60. The effect of high temperature on the design of blast furnace slag and coarse fly ash-based geopolymer mortar10.1016/j.compositesb.2016.02.043 ↗
61. Correlation of strength to apparent porosity of geopolymers-understanding through variations of setting time10.1016/j.conbuildmat.2015.05.059 ↗
62. Effect of nano-silica on strength and durability of fly ash based geopolymer mortar10.1016/j.conbuildmat.2014.07.093 ↗
63. Aqueous aluminates, silicates, and aluminosilicates10.1039/cs9942300319 ↗
64. Role of surface speciation in the low-temperature dissolution of minerals10.1038/331431a0 ↗
65. NaOH activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
66. Workability and strength of lignite bottom ash geopolymer mortar10.1016/j.jhazmat.2009.01.120 ↗
67. Rational utilization of volcanic ashes based on factors affecting their alkaline activation10.1016/j.jnoncrysol.2017.02.024 ↗
68. Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser10.1016/j.jobe.2017.12.009 ↗
69. Thermal cycling stability of fly ash based geopolymer mortars10.1016/j.compositesb.2017.06.029 ↗
70. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste10.1016/j.cemconcomp.2013.09.012 ↗
71. A comparative study of high- and low-Al2O3 fly ash based-geopolymers: the role of mix proportion factors and curing temperature10.1016/j.matdes.2016.01.084 ↗
72. Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer10.1016/j.conbuildmat.2017.04.004 ↗
73. Joseph · 2015
74. Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete10.1016/j.conbuildmat.2016.06.062 ↗
75. Compressive strength of GGBFS based GPC under thermal curing10.1016/j.conbuildmat.2016.09.076 ↗
76. The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites10.1016/j.conbuildmat.2015.07.052 ↗
77. The effect of heat-curing on transport properties of low-calcium fly ash-based geopolymer concrete10.1016/j.conbuildmat.2016.02.210 ↗
78. Gümüş · 2016
79. Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes10.1016/j.conbuildmat.2017.03.153 ↗
80. Hydration process of interfacial transition in potassium polysialate (K-PSDS) geopolymer concrete10.1680/macr.2005.57.1.33 ↗
81. Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete10.1016/j.conbuildmat.2016.05.008 ↗