journal article·2020-01

Effect of nanosilica on sulfate resistance of cement mortar under partial immersion

Qian Huang, Xiaohong Zhu, Liang Zhao, Min Zhao, Yuanyuan Liu, Xiangchao Zeng

Publisher page

Abstract

Abstract The sulfate resistance of both plain and nanosilica-blended cement mortars partially immersed in 5% Na2SO4 solution was investigated in this study. Before sulfate attack testing, the pore structure of the samples was evaluated using mercury intrusion porosimetry. The mass loss, linear expansion and strength loss of the specimens were evaluated to characterise their damage progress. The microstructure and phase composition of the deteriorated samples were analysed using scanning electron microscopy equipped with energy dispersive spectroscopy and X-ray diffraction. The results indicate that the incorporation of nanosilica refined the pores and reduced the pore connectivity, which led to the improved sulfate resistance of cement mortars under partial immersion condition. Moreover, the sulfate resistance of cement mortars under partial immersion condition increased as their nanosilica content increased (in the range of 0 to 5 wt.% replacement of cement weight). Coarse nanosilica, which featured the average particle size of 50 nm presented better potential for enhancing the sulfate resistance of the specimens compared with fine nanosilica (average particle size of 10 nm). The main mechanism for the damage to the evaporation zone of mortars partially exposed to sulfate environment was the chemical sulfate attack rather than salt crystallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Salt weathering distress on concrete exposed to sodium sulfate environment
2. Damage mechanisms of two-stage concrete exposed to chemical and physical sulfate attack10.1016/j.conbuildmat.2017.01.112 ↗
3. Effect of surface treatment on durability of concrete exposed to physical sulfate attack10.1016/j.conbuildmat.2014.10.006 ↗
4. Durability of concrete exposed to leaching and external sulphate attacks10.1016/j.cemconres.2009.07.021 ↗
5. Mechanism of sulfate attack: A fresh look-Part 2. Proposed mechanisms10.1016/S0008-8846(02)00958-4 ↗
6. Accelerated sulfate attack on mortars using electrical pulse10.1016/j.conbuildmat.2015.07.034 ↗
7. Dynamic stress-strain relationship of concrete subjected to chloride and sulfate attack10.1016/j.conbuildmat.2018.01.044 ↗
8. Chemical sulfate attack performance of partially exposed cement and cement + fly ash paste10.1016/j.conbuildmat.2011.08.071 ↗
9. Micro-analysis of “salt weathering” on cement paste10.1016/j.cemconcomp.2010.10.010 ↗
10. Investigation of concrete exposed to dual sulfate attack10.1016/j.cemconres.2014.06.002 ↗
11. Response of concrete to accelerated physical salt attack exposure10.1016/j.cemconres.2015.02.006 ↗
12. Deterioration mechanism of plain and blended cement mortars partially exposed to sulfate attack10.1016/j.conbuildmat.2017.08.017 ↗
13. Sulfate attack on concrete with mineral admixtures10.1016/0008-8846(95)00195-6 ↗
14. Mindess · 2003
15. Impedance spectroscopy to characterize the pore structure during the hardening process of Portland cement paste10.1016/j.electacta.2005.02.125 ↗
16. The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete10.1016/j.matdes.2014.02.051 ↗
17. Effects of nanomaterials on hardening of cement-silica fume-fly ash-based ultrahigh-strength concrete10.1680/jadcr.15.00080 ↗
18. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
19. Influence of different types of nano-SiO2 particles on properties of high-performance concrete10.1016/j.conbuildmat.2016.03.041 ↗
20. From pore size distribution to an equivalent pore size of cement mortar10.1007/BF02472993 ↗
21. Characteristics of surface-treatment of nano-SiO2 on the transport properties of hardened cement pastes with different water-to-cement ratios10.1016/j.cemconcomp.2014.07.022 ↗
22. On the relevance of volume increase for the length changes of mortar bars in sulfate solutions10.1016/j.cemconres.2013.01.002 ↗