journal article·2020-04

Phase separation and thermal degradation of plastic bag waste modified bitumen during high temperature storage

Mohammed Nouali, Elhem Ghorbel, Zohra Derriche

Publisher page

Abstract

Abstract Phase separation and thermal-oxidative degradation can occur during storage and transportation of polymer modified bitumens (PmB), and both phenomena may substantially erode the properties of the PmB. In this paper, we investigate the phase separation and thermal degradation issues of waste plastic bag modified bitumen (WPmB) samples stored under quiescent conditions, as suggested by the standard storage stability testing procedures, and under a low continuous agitation. As for the phase separation, empirical basic tests, dynamic rheological tests and dissolution in a diluent of a small quantity taken from each section; top, intermediate and bottom, of the WPmB stored samples are used to evaluate the potential of segregation and migration of plastic particles within the stored samples under static and agitation conditions. As for the WPmB degradation, FTIR spectra analysis and different binder ageing testings were used to estimate the effect of both heat and air on the properties of the WPmB during its storage at high temperature for a duration of 48 h. The phase separation results demonstrated that the totality of the plastic particles have separated completely from the bitumen during static storage. However the plastic remains well distributed in the bituminous matrix of the agitated samples thanks to the low continuous agitation, which obviously manage to prevent plastic particles from flocculating and then from separating. Moreover, the thermal degradation results indicate that no considerable adverse effects of the high temperature storage are observed on the ageing of the modified bitumen as well as on the thermal degradation of the waste plastic bag additive.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Use of waste plastic and waste rubber tyres in flexible highway pavements
2. A technique to dispose waste plastics in an ecofriendly way – Application in construction of flexible pavements10.1016/j.conbuildmat.2011.08.031 ↗
3. Waste packaging tape as a novel bitumen modifier for hot-mix asphalt10.1016/j.conbuildmat.2018.10.170 ↗
4. Plastic bag waste modified bitumen a possible solution to the Algerian road pavements
5. Effect of polyethylene on life of flexible pavements10.1016/j.conbuildmat.2008.07.004 ↗
6. A. Mahrez, and M. R. Karim, Rheological evaluation of bituminous binder modified with waste plastic material, 5th Int. Symp. Hydrocarb. Chem. ISHC5 Sidi Fredj Algiers, pp. 1–7, 2010.
7. « Rheological Properties of Polyethylene and Polypropylene Modified Bitumen », Int. J. Civ. Environ. Struct. Constr
8. M. Singhal, Y. Yadav, and R. Mandal, Use of modified bitumen in highway construction, Int. J. Innov. Res. Sci. Technol., vol. 2, n. 12, pp. 376–382.
9. Rheology of waste plastic fibre-modified bitumen10.1080/10298430903255296 ↗
10. D. Nasr, and A. H. Pakshir, Rheology and storage stability of modified binders with waste polymers composites, Road Mater. Pavement Des., pp. 1–20, 2017.10.1080/14680629.2017.1417152 ↗
11. Combined modification of asphalt with polyethylene packaging waste and organophilic montmorillonite10.1016/j.polymertesting.2011.11.008 ↗
12. Green pavements: reuse of plastic waste in asphalt mixtures10.1617/s11527-015-0602-x ↗
13. Low density polyethylene modified dense graded bituminous macadam10.14445/22315381/IJETT-V16P273 ↗
14. Effect of gamma-irradiated recycled low-density polyethylene on the high- and low-temperature properties of bitumen10.1155/2013/141298 ↗
15. Evaluation of pyrolisis LDPE modified asphalt paving materials10.1061/(ASCE)0899-1561(2009)21:10(618) ↗
16. Laboratory evaluation of HMA with high density polyethylene as a modifier10.1016/j.conbuildmat.2010.12.037 ↗
17. Modification of bitumen characteristic by using recycled polyethylene10.1080/15421406.2014.967652 ↗
18. Rheological properties of polyethylene-modified asphalt binder
19. Wan, « Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture »10.1051/matecconf/201710309018 ↗
20. Effect of Low-Density Polyethylene on Fracture Toughness of Asphalt Concrete Mixtures10.1061/(ASCE)MT.1943-5533.0000106 ↗
21. M. A. Poldushov, and Y. P. Miroshnikov, Compatibilization of LDPE-bitumen emulsions, n. 6, pp. 225–236, 2012.
22. Characterization of bitumen/plastic blends for flexible pavement application10.1016/j.promfg.2016.12.051 ↗
23. Polymer modification of bitumen: Advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
24. The research of GMA-g-LDPE modified Qinhuangdao bitumen10.1016/j.conbuildmat.2007.03.007 ↗
25. « Use of modified bituminous binders, special bitumens and bitumens with additives in road pavements », (Report No 303)
26. High temperature stability of different polymer-modified bitumens: A rheological evaluation10.1002/app.25336 ↗
27. Destabilization mechanism of polyethylene-modified bitumen10.1002/app.23091 ↗
28. In situ steric stabilization of polyethylene emulsions in asphalt binders for hot-mix pavement applications10.1016/0927-7757(93)80251-9 ↗
29. Compatibility and storage stability of styrene-butadiene-styrene copolymer modified bitumens10.1007/BF02486904 ↗
30. J. Zhu, Storage Stability and Phase Separation Behaviour of Polymer-Modified Bitumen Dr. Thesis Sch. Archit. Built Environ. Stockh. Swed. 201610.1080/10298436.2016.1211870 ↗
31. Storage stability and rheological properties of asphalt modified with waste packaging polyethylene and organic montmorillonite10.1016/j.clay.2014.11.033 ↗
32. Effect of nanoclay on the morphology of polyethylene modified bitumen10.1016/j.conbuildmat.2016.04.098 ↗
33. Bitumen/polyethylene blends: using m-LLDPEs to improve stability and viscoelastic properties10.1007/s00397-005-0009-7 ↗
34. Effect of Polyethylene Grafted with Maleic Anhydride on Asphalt Properties10.1061/(ASCE)CF.1943-5509.0000516 ↗
35. Polymer-modified bitumen of recycled LDPE and maleated bitumen10.1002/app.36810 ↗
36. Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt10.1016/j.conbuildmat.2013.04.047 ↗
37. M. Liang, S. Ren, W. Fan, and X. Xin, Storage stability and its relationship with microstructure of SBS modified de-oiled asphalt, in Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering, Wuhan, China, 201610.2991/mmme-16.2016.209 ↗
38. R. Urquhart, E. Woodall, S. Malone, and S. Lourensz, Effects of hot storage on polymer modified binder properties and field performance, in Proceedings of 6th Eurasphalt & Eurobitume Congress, 2016.10.14311/EE.2016.064 ↗
39. Thermo-rheological properties and storage stability of SEBS/kaolinite clay compound modified asphalts10.1016/j.eurpolymj.2005.07.004 ↗
40. Thermal degradation of SBS in bitumen during storage: Influence of temperature, SBS concentration, polymer type and base bitumen10.1016/j.polymdegradstab.2017.11.008 ↗
41. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts10.1016/j.jhazmat.2010.06.061 ↗
42. Phase field simulation and microscopic observation of phase separation and thermal stability of polymer modified asphalt10.1016/j.conbuildmat.2019.01.180 ↗
43. Effect of ultraviolet aging on rheology, chemistry and morphology of ultraviolet absorber modified bitumen10.1617/s11527-012-9958-3 ↗
44. Phase behavior and hot storage characteristics of asphalt modified with various polyethylene: Experimental and numerical characterizations10.1016/j.conbuildmat.2019.01.095 ↗
45. Storage stability and high-temperature performance of asphalt binder modified with recycled plastic10.1080/14680629.2016.1207554 ↗
46. H. U. Bahia, National Research Council (U.S.), Transportation Research Board, American Association of State Highway and Transportation Officials, et National Cooperative Highway Research Program, Characterization of modified asphalt binders in Superpave mix design. Washington, D.C.: National Academy Press, 2001.
47. J. Youtcheff, N. Wijayatilleke, and A. Shenoy, Evaluation of the Laboratory Asphalt Stability Test Report No. FHWA-HRT-04-111, Office of Infrastructure Research and Development Federal Highway Administration, 2005.
48. Effect of storage stability on chemical and rheological properties of polymer-modified asphalt binders for road pavement construction10.1016/j.conbuildmat.2017.04.014 ↗
49. FTIR and rheology analysis of aging on different ultraviolet absorber modified bitumens10.1016/j.conbuildmat.2016.04.040 ↗
50. FTIR analysis of UV aging on bitumen and its fractions10.1617/s11527-015-0583-9 ↗
51. Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: A comparative analysis10.1016/j.jiec.2009.01.003 ↗
52. Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen10.1016/j.polymertesting.2008.09.006 ↗