journal article·2020-06

Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink

Xiaoyan Sun, Qun Wang, Hailong Wang, Long Chen

Publisher page

Abstract

Abstract 3D printing concrete has been accepted as a promising construction material which can realise formless construction and digital design. The fresh properties and the hardened strength of concrete ink are crucial for structural applications. In this study, different volume fractions of multi-walled carbon nanotubes (MWCNTs) were added to a 3D printing PVA fibre-reinforced mortar ink to modify its mechanical properties. To evaluate the effect of MWCNTs on the workability of 3D printing mortar, the buildability, shape stability, flowability and setting time of fresh mortar were tested. The improvement efficiency of MWCNTs on the mechanical properties of 3D printing PVA mortar ink was also experimentally studied. The test results indicate that a small amount of MWCNTs has almost no effect on the ink’s workability. The early age compressive and flexural strength of printing mortars with MWCNTs can be effectively improved, which benefits the requirements of 3D printing. The 3-d compressive strength of mortar with addition of 0.1 wt% of MWCNTs can be enhanced by 33.6%, while the 28-d strength was hardly affected. Agglomeration and poor dispersion of MWCNTs can generally be detected by SEM images as volume content of carbon nanotubes increases. Considering the influence of MWCNTs on the fresh and hardened properties of mortar and on the requirements of 3D printing, the optimum volume fraction of carbon nanotubes for 3D printing PVA fibre-reinforced mortar should be 0.02–0.05 wt%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 3D printing based on imaging data Review of medical applications10.1007/s11548-010-0476-x ↗
2. Medical applications for 3D printing: current and projected uses
3. 3D Printing multifunctionality: structures with electronics10.1007/s00170-014-5717-7 ↗
4. Fresh properties of a novel 3D printing concrete ink10.1016/j.conbuildmat.2018.04.115 ↗
5. Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing10.1016/j.cemconres.2018.02.001 ↗
6. Fresh and hardened properties of 3D printable cementitious materials for building and construction10.1016/j.acme.2017.02.008 ↗
7. Hardened properties of high-performance printing concrete10.1016/j.cemconres.2011.12.003 ↗
8. Carbon nanotubes – becoming clean10.1016/S1369-7021(06)71789-8 ↗
9. J.M. Maker, J.C. Margeson. Carbon nanotube/cement composites-early results and potential applications, in: Proceedings of the 3rd International Conference on On Construction Materials: Performance, Innovations and Structural Implications, Vancouver, BC, USA, 22–24 August 2005; pp. 1–10.
10. Portland cement mortar nanocomposites at low carbon nanotube and carbon nanofiber content: a fracture mechanics experimental study10.1016/j.cemconcomp.2016.03.010 ↗
11. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites10.1016/j.cemconcomp.2009.10.007 ↗
12. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
13. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
14. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
15. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites10.1016/j.conbuildmat.2012.04.086 ↗
16. Effect of multiwalled carbon nanotubes on mechanical strength of cement paste10.1061/(ASCE)MT.1943-5533.0000350 ↗
17. Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar10.1016/j.conbuildmat.2010.06.046 ↗
18. Rheological and harden properties of the high-thixotropy 3D printing concrete10.1016/j.conbuildmat.2018.12.061 ↗
19. Chinese National Standard GB/T 2419-2005, Method for determining fluidity of cement mortar. Beijing, 2005.
20. Chinese National Standard GB/T1346-2011, Testing method for water consumption, setting time and stability of cement standard consistency. Beijing, 2011.
21. Strength evaluation of concrete structures using ISonReb linear regression models: laboratory and site (case studies) validation10.1016/j.conbuildmat.2017.04.162 ↗
22. A feasible method for measuring the buildability of fresh 3D printing mortar10.1016/j.conbuildmat.2019.07.326 ↗
23. Chinese National Standard GB/T17671-1999, Testing method for strength of cement mortar (ISO). Beijing, 1999.
24. Largely enhanced fracture toughness of the PP/EPDM blends induced by adding carbon nanofibers10.1016/j.compscitech.2018.05.048 ↗
25. M. Ramezani, Y.H. Kim, B. Hasanzadeh, et al. Influence of carbon nanotubes on SCC flowability, In Proceedings of 8th International RILEM Symposium on Self-Compacting Concrete - SCC, At Washington DC, USA, 2016.
26. Strength, bleeding and setting time of cement mortar with carbon nanotubes and nanofibers10.1166/asem.2016.1863 ↗
27. Mix design and fresh properties for high-performance printing concrete10.1617/s11527-012-9828-z ↗
28. Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars10.1016/j.conbuildmat.2017.09.109 ↗
29. A feasibility study on HPMC-improved sulphoaluminate cement for 3D printing10.3390/ma11122415 ↗
30. Hydration process and strength development of sulphoaluminate cement cured at low temperature
31. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste10.1016/j.conbuildmat.2014.11.049 ↗