Effectiveness of textile reinforced mortar (TRM) materials in preventing seismic-induced damage in a U-shaped masonry structure submitted to pseudo-dynamic excitations
Source abstract
Abstract
[EN] This paper presents the experimental results obtained from tests on a 2/3 scale U-shaped masonry building constructed in one of the ICITECH laboratories at the Universitat Politecnica de Valencia (Spain). The prototype measured 3.31 x 4.19 m(2) by 2.15 m high and had a wall thickness of 230 mm. The masonry was composed of 230 x 110 x 50 mm(3) solid clay bricks with approximately 10 mm-thick mortar joints arranged in English bond. The tests were aimed at evaluating the effectiveness of cement-based reinforcing materials (Textile Reinforced Mortar) applied to weak masonry substrates severely damaged by horizontal loads such as those induced by a seismic event. The tests were carried out in three phases: (i) testing of the as-built structure, (ii) application of one external layer of TRM to restore the masonry's original load-bearing capacity and then (iii) testing the TRM-strengthened structure. Dynamic behaviour was monitored by both traditional and fibre optic sensors (FO), including 28 Linear Variable Displacement Transducers (LVDTs) and 3 long-gauge optical sensors. Strengthening effectiveness was evaluated by several parameters: hysteretic curves, strength degradation, computed cumulative energy dissipation and cracking mechanisms. TRM reinforcement was shown to significantly extend the load-bearing and displacement capacity of the masonry prototype, reducing seismic-induced damage applied by pseudodynamic excitation, although it had a limited effect on cumulative energy dissipation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Experimental seismic performance of a full-scale unreinforced clay-masonry building with flexible timber diaphragms10.1016/j.engstruct.2018.02.016 ↗
2. Out-of-plane shaking table test on URM single leaf and cavity walls10.1016/j.engstruct.2016.07.011 ↗
3. Experimental assessment of the out-of-plane performance of masonry buildings through shaking table tests
4. Properties and applications of FRP in strengthening RC structures: a review10.1016/j.istruc.2018.09.008 ↗
5. State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM)10.1016/j.conbuildmat.2018.08.039 ↗
6. Modeling of shear behavior of reinforced concrete beams strengthened with FRP10.1016/j.compstruct.2019.02.073 ↗
7. Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: a review
8. A review of test methods for studying the FRP-concrete interfacial bond behavior10.1016/j.conbuildmat.2018.02.163 ↗
9. Assessing the performance of CFRP strengthening on masonry walls using experimental modal analysis10.1016/j.engstruct.2019.05.036 ↗
10. Review of strengthening techniques for masonry using fiber reinforced polymers10.1016/j.compstruct.2016.10.132 ↗
11. Debonding Process of Masonry Element Strengthened with FRP10.1016/j.proeng.2015.06.206 ↗
12. Influence of mortar joints on the behaviour of FRP materials bonded to different masonry substrates10.1016/j.engstruct.2017.10.030 ↗
13. Debonding behavior of ancient masonry elements strengthened with CFRP sheets10.1016/j.compositesb.2012.04.029 ↗
14. DPCM 09/02/11. Evaluation and reduction of seismic risk of cultural heritage with reference to the Technical Standards for Constructions promulgated by the Ministry of Infrastructure and Transport on 2008 January 14th; 2011.
15. Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading10.1617/s11527-006-9207-8 ↗
16. Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: Out-of-plane cyclic loading10.1617/s11527-007-9226-0 ↗
17. Static and cyclic out-of-plane response of masonry walls strengthened using textile-mortar system10.1061/(ASCE)MT.1943-5533.0000128 ↗
18. Seismic performance of masonry walls retrofitted with steel reinforced grout10.1002/eqe.2625 ↗
19. Experimental diagonal tension (shear) test of Un-Reinforced Masonry (URM) walls strengthened with textile reinforced mortar (TRM)10.1016/j.conbuildmat.2017.12.234 ↗
20. Pseudo-static cyclic loading comparison of reinforced masonry walls strengthened with FRCM or NSM FRP10.1016/j.conbuildmat.2018.02.043 ↗
21. Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites10.1016/j.conbuildmat.2018.05.132 ↗
22. Shaking table tests of a half-scale 2-storey URM building retrofitted with a high ductility fibre reinforced concrete overlay system10.1016/j.engstruct.2019.109424 ↗
23. Shaking table tests of two different reinforcement techniques using polymeric grids on an asymmetric limestone full-scaled structure10.1016/j.engstruct.2008.04.039 ↗
24. MAPEI, (2018) http://www.mapei.com/.
25. EN 14580. Natural stone test methods. Determination of the static elastic moduls, (2005).
26. EN 13412. Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression, (2008).
27. EN 1015-11. Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar, (1999).