Effect of sleeper bottom texture on lateral resistance with discrete element modelling
Source abstract
Abstract
Abstract The lateral stability of ballasted track becomes more important because of the safety requirement under the demand of higher train speed and heavier axle load. To increase the lateral resistance of ballast bed, this paper proposes three types of new sleepers, frictional sleepers. The frictional sleepers are sleepers with different shapes of textures attached at the sleeper bottom. To study the application feasibility of the frictional sleepers, experimental tests (single sleeper pull-out test) and numerical simulation (discrete element modelling) are performed. The lateral resistances of the three types of frictional sleepers are compared with the traditional sleeper based on the experimental test, and the mechanism of the lateral resistance increase is revealed according to the numerical simulation. The results indicate that the frictional sleepers can increase the lateral resistance by 32% (maximum), due to the enhanced interaction between sleeper and ballast particles. More importantly, different types of frictional sleepers have different performances, and the optimal friction sleeper is confirmed. This study is helpful for the further research on sleeper design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Railway Engineering and Dynamics · Mechanical stress and fatigue analysis · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Effects of sleeper shape on lateral resistance of railway ballasted tracks10.1061/9780784413425.050 ↗
2. Experimental investigation of the characteristics of a granular ballast bed under cyclic longitudinal loading10.1016/j.conbuildmat.2017.12.037 ↗
3. Indraratna · 2018
4. Track buckling prevention: theory, safety concepts, and applications
5. Contribution of base, crib, and shoulder ballast to the lateral sliding resistance of railway track: a geotechnical perspective10.1177/0954409710397094 ↗
6. Numerical investigation on effect of the relative motion of stock/switch rails on the load transfer distribution along the switch panel in high-speed railway turnout10.1080/00423114.2018.1458992 ↗
7. Safari Baghsorkhi · 2017
8. Influence of a tamping operation on the vibrational characteristics and resistance-evolution law of a ballast bed10.1016/j.conbuildmat.2019.117879 ↗
9. Lateral resistance of ballasted tracks for various shapes of sleepers based on limit equilibrium methods
10. Experimental assessment of dynamic lateral resistance of railway concrete sleeper10.1016/j.soildyn.2015.11.011 ↗
11. Laboratory and field investigation of the effect of geogrid-reinforced ballast on railway track lateral resistance10.1016/j.geotexmem.2016.11.003 ↗
12. Sleeper End Resistance of Ballasted Railway Tracks10.1061/(ASCE)GT.1943-5606.0001088 ↗
13. Investigating the effect of different bonding areas on the lateral resistance of polyurethane-mixed ballast using the discrete element method
14. On the ballast–sleeper interaction in the longitudinal and lateral directions10.1177/0954409716682629 ↗
15. Utilizing the track panel displacement method for estimating vertical load effects on the lateral resistance of continuously welded railway track10.1177/0954409713508937 ↗
16. Ballast bed resistance characteristics based on discrete-element modeling10.1177/1687814018781461 ↗
17. Kish · 2011
18. An experimental and numerical study on the effect of different types of sleepers on track lateral resistance
19. Comparing lateral resistance to different types of sleeper in ballasted railway tracks
20. Lateral resistance of railway track with frictional sleepers
21. Shaking table test using full-scale model for lateral resistance force of ballasted tracks during earthquake10.1016/j.proeng.2016.06.156 ↗
22. Reducing railway track settlement using three-dimensional polyurethane polymer reinforcement of the ballast10.1016/j.conbuildmat.2013.03.002 ↗
23. Analysis of mechanical properties of polyurethane-mixed ballast based on energy method10.1016/j.conbuildmat.2018.06.008 ↗
24. Discrete element modelling of lateral displacement of a granular assembly under cyclic loading10.1016/j.compgeo.2015.06.006 ↗
25. Characterization of geogrid reinforced ballast behavior at different levels of degradation through triaxial shear strength test and discrete element modeling10.1016/j.geotexmem.2015.04.012 ↗
26. Experimental and discrete element modeling of geocell-stabilized subballast subjected to cyclic loading10.1061/(ASCE)GT.1943-5606.0001431 ↗
27. Effectiveness of soft baseplates and fastenings to mitigate track dynamic settlement at transition zone at railway bridge approaches
28. Three-dimensional modeling of geocell-reinforced straight and curved ballast embankments10.1016/j.compgeo.2018.05.011 ↗
29. Influence of tire-derived aggregates on the properties of railway ballast material10.1061/(ASCE)MT.1943-5533.0001702 ↗
30. A study into the use of crumb rubber in railway ballast10.1016/j.conbuildmat.2014.10.045 ↗
31. Vertical load distribution in ballasted railway tracks with steel slag and limestone ballasts
32. Experimental comparison of the lateral resistance of tracks with steel slag ballast and limestone ballast materials10.1177/0954409715623577 ↗
33. Effect of rubber crumbs on the cyclic behavior of steel furnace slag and coal wash mixtures10.1061/(ASCE)GT.1943-5606.0001827 ↗
34. Discrete element modelling of under sleeper pads using a box test10.1007/s10035-018-0795-0 ↗
35. Influence of under sleeper pads on ballast behavior under cyclic loading: experimental and numerical studies10.1061/(ASCE)GT.1943-5606.0001954 ↗
36. Behaviour of under sleeper pads at switches and crossings - Field measurements10.1177/0954409717707400 ↗
37. Vibration attenuation at rail joints through under sleeper pads10.1016/j.proeng.2017.05.031 ↗
38. Full-scale study of Neoballast section for its application in railway tracks: optimization of track design10.1617/s11527-018-1167-2 ↗
39. NEOBALLAST: new high-performance and long-lasting ballast for sustainable railway infrastructures10.1016/j.trpro.2016.05.151 ↗
40. Laboratory fatigue performance of under-ballast mats under varying loads and support conditions
41. The lateral displacement response of geogrid-reinforced ballast under cyclic loading10.1016/j.geotexmem.2013.07.007 ↗
42. A. Zarembski, Survey of techniques and approaches for increasing the lateral resistance of wood Tie track, Newark, DE: Department of Civil and Environmental Engineering, University of….
43. Numerical method for evaluating the lateral resistance of sleepers in ballasted tracks10.1016/j.sandf.2014.04.014 ↗
44. The contribution of ballast layer components to the lateral resistance of ladder sleeper track10.1016/j.conbuildmat.2019.01.017 ↗
45. Investigating the effect of nailed sleepers on increasing the lateral resistance of ballasted track10.1016/j.compgeo.2015.08.006 ↗
46. V. Ungureanu, A. Mariş, Y shape railway sleepers from fiber reinforced foamed urethane, 2013.
47. A numerical investigation on the lateral resistance of frictional sleepers in ballasted railway tracks10.1177/0954409714543507 ↗
48. Field investigation on the lateral resistance of ballasted tracks with strengthened steel sleepers using the multi sleeper push test
49. Design of a new high lateral resistance sleeper and performance comparison with conventional sleepers in a curved railway track by means of finite element models10.1590/S1679-78252014000700009 ↗
50. C. Ciobanu, Behaviour of the track in hot weather-Rail thermal forces for jointed and CWR track, 2017.
51. The lateral resistance of the track (part 2)
52. Numerical modelling of granular materials with spherical discrete particles and the bounded rolling friction model10.1016/j.compgeo.2016.12.034 ↗
53. Aggregate shape effects on ballast tamping and railroad track lateral stability
54. Shakedown behaviors of railway ballast under cyclic loading10.1016/j.conbuildmat.2017.07.225 ↗
55. Discrete element simulation of railway ballast: modelling cell pressure effects in triaxial tests10.1007/s10035-016-0660-y ↗
56. Micromechanical Particle Interactions in Railway Ballast through DEM Simulations of Direct Shear Tests10.1061/(ASCE)GM.1943-5622.0001403 ↗
57. N.R.A.o.t.P.s.R.o. China, Code for design of high speed railway, TB 1062-2014, 2014.
58. Li · 2002
59. B.s.p.B.E. British Standards Institution, Aggregates for railway ballast, British Standards Institution London, 2013.
60. Random generation method of ballast 2D topology based on particle characteristics10.1016/j.conbuildmat.2019.06.131 ↗
61. Automatic clump generation based on mid-surface
62. C. Itasca, PFC (particle flow code in 2 and 3 dimensions), version 5.0 [User’s manual], Minneapolis, 2014.
63. Calibration of the discrete element method10.1016/j.powtec.2017.01.015 ↗