Impacts of sulphates on rheological property and hydration performance of cement paste in the function of polycarboxylate superplasticizer
Source abstract
Abstract
Abstract Effects of sulphates on the dispersibility as well as adsorption behavior of polycarboxylate superplasticizer (PCE) were investigated, and the hydration process of cement paste in their synergistic function was studied systematically. Results show that with increased dosage of sulphate added into cement paste, the adsorption-dispersing behavior of PCE decreases. Alkali sulphates (Na2SO4 and K2SO4) most remarkably impact the adsorption behavior as well as the dispersing capability of PCE. Low amount of sulphates added into cement paste can result in the retardation of cement hydration, while high amount of sulphates can advance cement hydration process. The increased content of MgSO4 continuously and most remarkably delays the maximum hydration peak in acceleration period and boosts the transformation from AFt to AFm. The addition of sulphates decreases the production of Ca(OH)2 (CH) due to the reaction between CH and sulphates to produce gypsum. Among the four types of sulphates, MgSO4 most significantly influences the microstructure of cement matrix. Due to the reaction between MgSO4 and calcium silicates hydrates (C-S-H gel), the Ca/Si ratio of hydration products is greatly reduced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Effects of polycarboxylate-type superplasticizer on fluidity and hydration behavior of cement paste10.1007/s11814-008-0255-3 ↗
2. Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes10.1016/j.cemconres.2014.10.004 ↗
3. Working mechanisms of the effects of initial hydration reactivity of cement on the performance of polycarboxylate-type superplasticizers
4. Surface and intercalation chemistry of polycarboxylate copolymers in cementitious systems10.1111/j.1551-2916.2009.03413.x ↗
5. Adsorbing behavior of polycarboxylate superplasticizer in the presence of the ester group in side chain10.1080/01932691.2016.1193814 ↗
6. Influence of polycarboxylate superplasticizer on rheological behavior in cement paste10.1007/s11595-018-1915-8 ↗
7. Effects of Interface Roughness and Interface Adhesion on New-to-Old Concrete Bonding
8. Compatibility between polycarboxylate-based admixtures and blended-cement pastes10.1016/j.cemconcomp.2012.08.020 ↗
9. Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer10.1016/S0008-8846(99)00230-6 ↗
10. The role of steric repulsive force in the dispersion of cement particles in fresh paste prepared with organic admixture10.1016/S0008-8846(96)00207-4 ↗
11. Importance of adequate soluble alkali content to ensure cement superplasticizer compatibility10.1016/S0008-8846(98)00179-3 ↗
12. Controlling of the adsorption and dispersing force of polycarboxylate-type superplasticizer by sulfate ion concentration in aqueous phase10.1016/S0008-8846(00)00503-2 ↗
13. Influence of alkali sulfates in clinker on the hydration and hardening of Portland cement10.1016/j.conbuildmat.2018.05.196 ↗
14. Long-term evolution of delayed ettringite and gypsum in Portland cement mortars under sulfate erosion10.1016/j.conbuildmat.2008.03.002 ↗
15. How sulfates and increased temperature affect delayed ettringite formation (DEF) in white cement mortars10.1016/j.conbuildmat.2011.03.051 ↗
16. A new class of organosilane-modified polycarboxylate superplasticizers with low sulfate sensitivity10.1016/j.cemconres.2011.09.006 ↗
17. Impact of admixtures on the hydration kinetics of Portland cement10.1016/j.cemconres.2011.03.005 ↗
18. Compatibility of superplasticizers with cements different in composition10.1016/S0008-8846(00)00229-5 ↗
19. The effect of sodium sulfate on the dispersion of polycarboxylate superplasticizer
20. Zimmermann · 2009 · 262
21. Effect of sulfate ion on the performance of polycarboxylate comb-like copolymers in cement suspensions
22. Effect of the repartition of the PEG side chains on the adsorption and dispersion behaviors of PCP in presence of sulfate10.1016/j.cemconres.2011.11.011 ↗
23. Fundamental mechanisms for polycarboxylate intercalation into C 3 A hydrate phases and the role of sulfate present in cement10.1016/j.cemconres.2009.08.013 ↗
24. Mechanistic study on the effect of sulfate ions on polycarboxylate superplasticisers in cement10.1680/adcr.12.00002 ↗
25. Effects of organosilane-modified polycarboxylate superplasticizer on the fluidity and hydration properties of cement paste10.1016/j.conbuildmat.2016.11.122 ↗
26. Preparation and characterization of new Ca-Al-polycarboxylate layered double hydroxides10.1016/j.matlet.2006.03.070 ↗
27. A simplified view on chemical effects perturbing the action of superplasticizers10.1016/S0008-8846(01)00534-8 ↗
28. Rheology and early age properties of cement systems10.1016/j.cemconres.2007.09.006 ↗
29. Effect of alkalies on Portland cement hydration Ⅱ. Alkalies present in form of sulphates10.1016/0008-8846(83)90078-9 ↗
30. Retardation of tricalcium aluminate hydration by calcium-sulfate10.1111/j.1151-2916.1979.tb18800.x ↗
31. Retardation of tricalcium aluminate hydration by sulfates10.1111/j.1151-2916.1977.tb15503.x ↗
32. The influence of calcium sulfate form on tee initial hydration of clinkers containing different alkali combinations10.1016/S0008-8846(97)00030-6 ↗
33. Influence of sulphate source on Portland cement hydration10.1680/adcr.1988.1.2.67 ↗
34. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
35. Early C(3)A hydration in the presence of different kinds of calcium sulfate10.1016/j.cemconres.2009.07.019 ↗
36. Hydration of C(3)A-gypsum systems10.1016/j.cemconres.2012.04.005 ↗
37. The influence of sodium salts and gypsum on alite hydration10.1016/j.cemconres.2015.04.015 ↗
38. Effects of polycarboxylate superplasticisers with various functional groups on the pore structure of cement mortar10.1680/jadcr.18.00239 ↗
39. Effects of PCEs with various carboxylic densities and functional groups on the fluidity and hydration performances of cement paste10.1016/j.conbuildmat.2018.12.216 ↗
40. Effect of carboxylic density on sulfate sensitivity of polycarboxylate superplasticizers10.1007/s12205-019-2283-4 ↗
41. GB/T8077-2000, Methods for testing uniformity of concrete admixture.
42. Effect of PCEs with different functional groups on the performance of cement paste10.1007/s11595-019-2173-0 ↗
43. Effect of bubble feature parameters on rheological properties of fresh concrete10.1016/j.conbuildmat.2018.11.088 ↗
44. Influence of PCE on rheological and hydration performances of cement paste10.1061/(ASCE)MT.1943-5533.0002924 ↗
45. Influence of tartaric acid on early hydration and mortar performance of Portland cement-calcium aluminate cement-anhydrite binder10.1016/j.conbuildmat.2016.02.214 ↗
46. The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system10.1016/j.conbuildmat.2018.09.139 ↗
47. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
48. Characterization of Mg components in reactive MgO – Portland cement blends during hydration and carbonation10.1016/j.jcou.2018.08.025 ↗
49. Investigation on microstructures of cementitious composites incorporating slag10.1680/adcr.13.00029 ↗
50. Microstructure and mechanical properties of fly ash blended cement pastes10.1016/j.conbuildmat.2014.10.009 ↗
51. Property investigation of individual phases in cementitious composites containing silica fume and fly ash10.1016/j.cemconcomp.2014.11.011 ↗
52. Effects of polycarboxylate superplasticizers with different molecular structure on the hydration behavior of cement paste10.1016/j.conbuildmat.2015.12.178 ↗
53. Adsorption of polyelectrolytes and its influence on the rheology, zeta potential, and microstructure of various cement and hydrate phases10.1016/j.jcis.2008.04.052 ↗
54. Effect of competitive adsorption between sodium gluconate and polycarboxylate superplasticizer on rheology of cement paste10.1016/j.conbuildmat.2017.03.211 ↗
55. Heat evolution during the hydration of Portland cement in the presence of fly ash, calcium hydroxide and super plasticizer10.1016/j.tca.2012.08.028 ↗
56. The application of thermal analysis, XRD and SEM to study the hydration behavior of tricalcium silicate in the presence of a polycarboxylate superplasticizer10.1016/j.tca.2015.05.020 ↗
57. Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes10.1016/j.cemconres.2014.11.009 ↗
58. Hydration kinetics of tri-calcium silicate in the presence of superplasticizers10.1021/jp027346b ↗
59. Effect and mechanism of sulfates on dispersity of polycarboxylate-type superplasticizers10.1007/s12205-016-0606-2 ↗
60. A new chemo-mechanical model of damage in concrete under sulfate attack10.1016/j.conbuildmat.2016.04.074 ↗
61. Compatibility between a polycarboxylate superplasticizer and the belite-rich sulfoaluminate cement: setting time and the hydration properties10.1016/j.conbuildmat.2013.10.028 ↗
62. Durability of portland cement-silica fume pastes in magnesium-sulfate and sodium-sulfate solutions