journal article·2020-09Open access

A state of the art review to enhance the industrial scale waste utilization in sustainable unfired bricks

Vivek Gupta, Hwa Kian Chai, Yong Lu, Sandeep Chaudhary

Abstract

Abstract Manufacturing of unfired bricks, in which fines are stabilized using cementitious or chemical binders, has huge potential to incorporate various wastes as a building construction material. Although researchers have successfully attempted various wastes in unfired bricks at the laboratory scale, their industrial-scale incorporation is still limited and unexplored. From an industrial point of view, mix proportions, mixing strategies, molding methods, and curing conditions are of equal importance. However, the unavailability of comprehensive knowledge related to manufacturing aspects hampers the industrial-scale implementation of research outcomes regarding waste incorporation in unfired bricks. This study summarizes the research outcomes related to waste incorporated unfired bricks, highlighting the manufacturing aspects from the industrial point of view. In this paper, mix proportions attempted, approaches for selecting the liquid content, adopted mixing strategies, compaction parameters, and curing conditions in previous studies are discussed for various waste incorporated bricks. Studies are classified based on the binder used for stabilization, and the effects of influencing parameters on the mechanical performance of bricks are discussed in detail. Furthermore, some industrial challenges related to unfired brick production in Indian scenario are discussed. Studies related to mixture proportioning, mixing optimization and hybrid curing development for a multi-waste incorporated system are expected to be future research trend for waste stabilization in unfired bricks. The comprehensive knowledge presented here is expected to support in the selection of suitable manufacturing aspects, which in turn enhances the waste utilization in unfired bricks at an industrial scale.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Performance of compacted cement-stabilised soil10.1016/j.cemconcomp.2004.01.003 ↗
2. Investigation of fibre reinforced mud brick as a building material10.1016/j.conbuildmat.2004.07.013 ↗
3. Effect of mix retention and curing on low-cement walling blocks10.1080/09613210210151008 ↗
4. Effect of sodium silicate and curing regime on properties of load bearing geopolymer mortar block10.1061/(ASCE)MT.1943-5533.0001782 ↗
5. Strength of lime–fly ash compacts using different curing techniques and gypsum additive10.1617/s11527-011-9738-5 ↗
6. Recycling of high volumes of cement kiln dust in bricks industry10.1016/j.jclepro.2016.12.082 ↗
7. Towards sustainable bricks production: An overview10.1016/j.conbuildmat.2018.01.038 ↗
8. Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization10.1016/j.conbuildmat.2012.09.013 ↗
9. Seaweed biopolymers as additives for unfired clay bricks10.1617/s11527-016-0801-0 ↗
10. Lightweight bricks made of diatomaceous earth, lime and gypsum10.1016/j.ceramint.2008.01.013 ↗
11. Silica-Calcareous non fired bricks made of biomass ash and dust filter from gases purification10.1007/s12649-017-0056-1 ↗
12. Alumina filler waste as clay replacement material for unfired brick production10.1016/j.enggeo.2013.05.006 ↗
13. Fly ash–lime–phosphogypsum hollow blocks for walls and partitions10.1016/S0360-1323(02)00068-9 ↗
14. Fly ash-lime-phosphogypsum cementitious binder: A new trend in bricks10.1007/BF02481697 ↗
15. The development of unfired clay building material using brick dust waste and Mercia mudstone clay10.1016/j.clay.2014.09.031 ↗
16. Stabilised unfired clay bricks for environmental and sustainable use10.1016/j.clay.2012.01.011 ↗
17. Phosphogypsum - fly ash cementitious binder - its hydration and strength development10.1016/0008-8846(95)00065-K ↗
18. Paving blocks from ceramic tile production waste10.1016/j.jclepro.2009.08.008 ↗
19. Properties of bricks made using fly ash, quarry dust and billet scale10.1016/j.conbuildmat.2012.11.077 ↗
20. Reuse of recycle paper mill waste in energy absorbing light weight bricks10.1016/j.conbuildmat.2011.07.053 ↗
21. Mechanical properties and durability of lime and natural pozzolana stabilized steam-cured compressed earth block bricks10.1007/s10706-015-9904-6 ↗
22. M.E.H.M. Pahroraji, H.M. Saman, M.N. Rahmat, K. Kamaruddin, Compressive strength and density of unfired lightweight coal ash brick, in: R. Hassan, M. Yusoff, Z. Ismail, N.M. Amin, M.A. Fadzil (Eds.), InCIEC 2013, Springer Singapore, Singapore, 2014: pp. 577–588. https://doi.org/10.1007/978-981-4585-02-6_50.10.1007/978-981-4585-02-6_50 ↗
23. Use of bio-briquette ash for the development of bricks10.1016/j.jclepro.2015.07.088 ↗
24. Utilization of waste phosphogypsum to prepare non-fired bricks by a novel hydration–recrystallization process10.1016/j.conbuildmat.2012.02.045 ↗
25. Recycling of industrial and urban wastes in brick production: A review
26. Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
27. A.A. Kadir A. Mohajerani Bricks: an excellent building material for recycling wastes – A review, in: Environmental Management and Engineering / 731,733: Unconventional Oil, ACTAPRESS 2011 Calgary, AB, Canada 10.2316/P.2011.736-02910.2316/P.2011.736-029 ↗
28. Application of agro-waste for sustainable construction materials: A review10.1016/j.conbuildmat.2012.09.011 ↗
29. Production of bricks from waste materials – A review10.1016/j.conbuildmat.2013.05.043 ↗
30. Development of eco-friendly porous fired clay bricks using pore-forming agents: A review10.1016/j.jenvman.2014.05.006 ↗
31. Fired clay bricks manufactured by adding wastes as sustainable construction material – A review10.1016/j.conbuildmat.2014.03.045 ↗
32. On the production of fired clay bricks from waste materials: A critical update10.1016/j.conbuildmat.2014.07.006 ↗
33. Development of fly ash-based geopolymer lightweight bricks using foaming agent - a review10.4028/www.scientific.net/KEM.660.9 ↗
34. Fired clay bricks made by adding wastes: Assessment of the impact on physical, mechanical and thermal properties10.1016/j.conbuildmat.2016.08.024 ↗
35. Utilization of inorganic industrial wastes in producing construction ceramics. Review of Russian experience for the years 2000–201510.1016/j.wasman.2016.11.008 ↗
36. A review of studies on bricks using alternative materials and approaches10.1016/j.conbuildmat.2018.08.152 ↗
37. Incorporation of waste materials in the manufacture of masonry bricks: An update review10.1016/j.jobe.2018.09.023 ↗
38. Development of sustainable alkali-activated bricks using industrial wastes10.1016/j.conbuildmat.2019.04.152 ↗
39. Sorption characteristics of stabilised soil blocks embedded with waste plastic fibres10.1016/j.conbuildmat.2014.03.042 ↗
40. Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks10.1016/j.conbuildmat.2013.09.044 ↗
41. Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials10.1016/j.conbuildmat.2016.12.055 ↗
42. Engineering characteristics of the compressed-stabilized earth brick10.1016/j.conbuildmat.2011.04.061 ↗
43. A perspective study on fly ash–lime–gypsum bricks and hollow blocks for low cost housing development10.1016/S0950-0618(02)00034-X ↗
44. Utilization of recycle paper mill residue and rice husk ash in production of light weight bricks10.1016/j.acme.2012.12.006 ↗
45. Performance of bricks made using fly ash and bottom ash10.1016/j.conbuildmat.2015.08.068 ↗
46. Reuse of cotton and recycle paper mill waste as building material10.1016/j.conbuildmat.2012.02.035 ↗
47. Durability study of stabilized earth concrete under both laboratory and climatic conditions exposure10.1016/j.conbuildmat.2005.02.001 ↗
48. Development of bricks from granulated blast furnace slag10.1016/0950-0618(95)00081-X ↗
49. Preparation of load-bearing building materials from autoclaved phosphogypsum10.1016/j.conbuildmat.2008.02.011 ↗
50. Cotton and limestone powder wastes as brick material10.1016/j.conbuildmat.2007.03.006 ↗
51. Lime based steam autoclaved fly ash bricks10.1016/j.conbuildmat.2006.01.005 ↗
52. Recycling of construction and demolition waste for producing new construction material (Brazil case-study)10.1016/j.conbuildmat.2016.07.044 ↗
53. Utilization of copper tailing for autoclaved sand–lime brick10.1016/j.conbuildmat.2010.06.100 ↗
54. Properties of EPS RHA lightweight concrete bricks under different curing conditions10.1016/j.conbuildmat.2011.03.061 ↗
55. Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks10.1016/j.conbuildmat.2010.10.012 ↗
56. Lightweight masonry block from oil palm kernel shell10.1016/j.conbuildmat.2013.12.087 ↗
57. Use of recycled aggregates in molded concrete bricks and blocks10.1016/S0950-0618(02)00019-3 ↗
58. Potential use of stockpiled circulating fluidized bed combustion ashes in manufacturing compressed earth bricks10.1016/j.conbuildmat.2008.08.025 ↗
59. Use of fly ash in production of light-weight building bricks10.1016/j.conbuildmat.2015.07.029 ↗
60. Preparation of high strength autoclaved bricks from hematite tailings10.1016/j.conbuildmat.2011.08.078 ↗
61. The effects of by-products incorporated in low-strength concrete for concrete masonry units10.1016/j.conbuildmat.2017.07.086 ↗
62. Evaluation of crumb rubber as aggregate for automated manufacturing of rubberized long hollow blocks and bricks10.1016/j.conbuildmat.2015.12.131 ↗
63. Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick10.1016/j.conbuildmat.2011.08.030 ↗
64. Use of circulating fluidized bed combustion fly ash and slag in autoclaved brick10.1016/j.conbuildmat.2012.03.006 ↗
65. Properties of masonry blocks produced with waste limestone sawdust and glass powder10.1016/j.conbuildmat.2007.04.008 ↗
66. Investigation into the use of unground rice husk ash to produce eco-friendly construction bricks10.1016/j.conbuildmat.2015.04.061 ↗
67. Development of rubberized geopolymer interlocking bricks
68. Production of eco-friendly bricks from copper mine tailings through geopolymerization10.1016/j.conbuildmat.2011.10.048 ↗
69. Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks10.1016/j.conbuildmat.2012.11.069 ↗
70. Feasibility of manufacturing geopolymer bricks using circulating fluidized bed combustion bottom ash10.1080/09593330.2011.626797 ↗
71. Low temperature process to create brick10.1016/j.conbuildmat.2007.03.004 ↗
72. Enhanced characteristics of alkali activated slag/ grog geopolymer bricks
73. Mechanical performances of weathered coal fly ash based geopolymer bricks10.1016/j.proeng.2011.11.2073 ↗
74. Radhakrishna Design and properties of fly ash, ground granulated blast furnace slag, silica fume and metakaolin geopolymeric based masonry blocks Eco-Efficient Masonry Bricks and Blocks 2015 Elsevier 329 358 10.1016/B978-1-78242-305-8.00015-2 https://linkinghub.elsevier.com/retrieve/pii/B978178242305800015210.1016/B978-1-78242-305-8.00015-2 ↗
75. Strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2012.11.015 ↗
76. Investigating the possibility of utilizing low kaolinitic clays in production of geopolymer bricks, Ceramics –
77. Effect of residual rice husk ash on mechanical-microstructural properties and thermal conductivity of sodium-hydroxide-activated bricks10.1002/ep.12848 ↗
78. M.M.A. Abdullah W.M.W. Ibrahim M.F.M. Tahir The properties and durability of fly ash-based geopolymeric masonry bricks Eco-Efficient Masonry Bricks and Blocks 2015 Elsevier 273 287 10.1016/B978-1-78242-305-8.00012-7 https://linkinghub.elsevier.com/retrieve/pii/B978178242305800012710.1016/B978-1-78242-305-8.00012-7 ↗
79. Laila Mardiah Deraman Mohd Mustafa Al Bakri Abdullah Liew Yun Ming Kamarudin Hussin Zarina Yahya The Strength of Bottom Ash-Based Geopolymer Brick with Inclusion of Fly Ash MSF 841 26 29 10.4028/www.scientific.net/MSF.841 10.4028/www.scientific.net/MSF.841.26 https://www.scientific.net/MSF.841 https://www.scientific.net/MSF.841.2610.4028/www.scientific.net/MSF.841.26 ↗
80. Cementless pressed blocks from waste products of coal-firing power station10.1016/j.conbuildmat.2005.08.002 ↗
81. Engineering of low cost geopolymer building bricks applied for various construction purposes
82. Strength and microstructure evaluation of recycled glass-fly ash geopolymer as low-carbon masonry units10.1016/j.conbuildmat.2016.03.123 ↗
83. Red mud-based geopolymers with tailored alkali diffusion properties and pH buffering ability10.1016/j.jclepro.2017.01.150 ↗
84. Recycling of pre-washed municipal solid waste incinerator fly ash in the manufacturing of low temperature setting geopolymer materials10.3390/ma6083420 ↗
85. Thermally treated clay sediments as geopolymer source material10.1016/j.clay.2015.01.027 ↗
86. Blended alkali-activated fly ash / brick powder materials10.1016/j.proeng.2016.07.397 ↗
87. Thermal isolation and mechanical properties of fibre reinforced mud bricks as wall materials10.1016/j.conbuildmat.2005.11.004 ↗
88. Centre for the Development of Enterprise., CRAterre., Ecole nationale des travaux publics de l’Etat (France), Compressed earth blocks : testing procedures., Centre for the Development of Enterprise, Brussels, 2000.
89. The static compaction of soils10.1680/geot.1993.43.2.337 ↗
90. Study on the mineral phase characteristics of various Indian biomass and coal fly ash for its use in masonry construction products10.1016/j.conbuildmat.2019.117413 ↗
91. Properties and Application of Geopolymer Masonry Units, SSRG International
92. Radhakrishna, V
93. An investigation on the production of construction brick with processed waste tea10.1016/j.buildenv.2005.05.004 ↗
94. Magnesium oxide as alternative binder for unfired clay bricks manufacturing10.1016/j.clay.2017.05.034 ↗
95. The using of waste phosphogypsum and natural gypsum in adobe stabilization10.1016/j.conbuildmat.2007.01.027 ↗
96. Autoclaved brick from low-silicon tailings10.1016/j.conbuildmat.2007.10.013 ↗
97. Beneficial use of boiler ash in alkali-activated bricks10.1016/j.resconrec.2017.09.013 ↗
98. Synthesis of structural binder for red brick production based on red mud and fly ash activated using Ca(OH)2 and Na2CO310.1016/j.conbuildmat.2017.04.171 ↗
99. Application of the Taguchi approach for the composition optimization of alkali activated fly ash binders10.1016/j.conbuildmat.2015.05.005 ↗
100. Influence of mixing procedure and mixer type on fresh and hardened properties of concrete: a review10.1617/s11527-012-9864-8 ↗