Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete
Source abstract
Abstract
Abstract This study investigates the mechanical properties of lightweight polymer concrete (LWPC) containing four different polymer ratios (10%, 12%, 14%, and 16%) tested at three different temperatures (−15 °C, +5 °C, and +25 °C) using destructive and non-destructive tests. In addition, a series of expressions are suggested to predict the splitting-tensile, flexural and impact strength of LWPC based on the main parameters and compressive strength. The analysis of variance (ANOVA) method was also used to determine relative contributions of the experimental parameters. The results of the destructive tests show that increasing the polymer ratio caused an increase in the compressive, splitting-tensile, and impact strengths, and energy absorption of LWPC. With decreasing the temperature from +25 °C to −15 °C, the compressive, splitting-tensile, flexural strengths, and elastic modulus (EM) increased, whereas the energy absorption, impact energy, and ductility decreased. The findings of this research provide beneficial information toward understanding the behavior of LWPC and its safe use in engineering applications where a material of high strength-to-weight ratio is required.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. M. Ghiasian, M. Rossini, J. Amendolara, B. Haus, S. Nolan, A. Nanni, N. Bel Had Ali, and L. Rhode-Barbarigos, Test-driven design of an efficient and sustainable seawall structure, Coast. Struct. (2019) 1222–1227.
2. Hydration, strength, and shrinkage of cementitious materials mixed with simulated desalination brine10.1520/ACEM20190060 ↗
3. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete10.1016/j.enbuild.2010.11.008 ↗
4. Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks10.1016/j.ceramint.2014.10.102 ↗
5. In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test
6. Influence of steel fibers on the behavior of light weight concrete made from crushed clay bricks10.11648/j.ajce.20140204.11 ↗
7. Characteristics of lightweight concrete containing mineral admixtures10.1016/j.conbuildmat.2010.07.025 ↗
8. Experimental investigation on annual changes in mechanical properties of structural concretes with various types of lightweight aggregates10.1016/j.conbuildmat.2014.09.044 ↗
9. R. Madandoust, M. Kazemi, P.K. Talebi, J. de Brito, Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres, Constr. Build. Mater. 223, (2019) 1038–1052.10.1016/j.conbuildmat.2019.08.006 ↗
10. Investigation of properties of low-strength lightweight concrete for thermal insulation10.1016/j.buildenv.2005.09.024 ↗
11. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete10.1016/S0008-8846(02)01032-3 ↗
12. A novel lightweight concrete-fabrication and its thermal and mechanical properties10.1016/j.conbuildmat.2013.03.091 ↗
13. Influence of low frequency bands on airborne and impact sound insulation single numbers for typical Portuguese buildings10.1016/j.apacoust.2014.09.019 ↗
14. Influence of aggregate size and gradation on acoustic absorption of enhanced porosity concrete
15. Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio10.1016/j.cemconres.2004.12.009 ↗
16. Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air10.1016/j.conbuildmat.2011.08.067 ↗
17. Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete10.1016/j.conbuildmat.2010.06.065 ↗
18. G. Martínez-Barrera, E. Vigueras-Santiago, O. Gencel, H.E. Hagg Lobland, Polymer concretes: a description and methods for modification and improvement, J. Mater. Educ. 33 (1) (2011) 37.
19. Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice10.1016/j.conbuildmat.2010.11.058 ↗
20. Effect of high temperature on mechanical and physical properties of lightweight cement based refractory including expanded vermiculite10.1179/1433075X11Y.0000000020 ↗
21. Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion10.1016/j.conbuildmat.2015.05.015 ↗
22. Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash10.1016/j.jclepro.2016.06.082 ↗
23. Mechanical properties of concrete pavements containing combinations of waste marble and granite powders
24. Chemical resistance of epoxy and polyester polymer concrete to acids and salts10.1515/POLYENG.2002.22.1.27 ↗
25. Investigation of vibration damping on polymer concrete with polyester resin10.1016/S0008-8846(99)00225-2 ↗
26. Designing machine tool structures in polymer concrete10.1016/0262-5075(83)90008-8 ↗
27. Hard turning of an alloy steel on a machine tool with a polymer concrete bed10.1016/j.jmatprotec.2007.10.031 ↗
28. V. Farhangi, M. Karakouzian, Effect of fiber reinforced polymer tubes filled with recycled materials and concrete on structural capacity of pile foundations, Appl. Sci. 10 (5) (2020) 1554.10.3390/app10051554 ↗
29. Characterisation of polymer concrete with epoxy polyurethane acryl matrix10.1016/j.conbuildmat.2012.07.037 ↗
30. Properties of epoxy polymer concrete matrix: effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers10.1016/j.conbuildmat.2016.07.111 ↗
31. Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects10.1016/j.conbuildmat.2019.117229 ↗
32. Effect of elevated in-service temperature on the mechanical properties and microstructure of particulate-filled epoxy polymers10.1016/j.polymdegradstab.2019.108994 ↗
33. The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets10.1016/j.conbuildmat.2018.09.086 ↗
34. ACI Committee, ACI 211.2, Standard Practice for Selecting Proportions for Structural Lightweight Concrete, American Concrete Institute (ACI), (2004) 1-20.
35. ASTM C33/C33M-16e1, Standard Specification for Concrete Aggregates, American Standards for Testing and Materials, 2016.
36. Mechanical properties of polymer-modified lightweight aggregate concrete10.1016/S0008-8846(01)00678-0 ↗
37. Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)10.1016/j.conbuildmat.2015.08.112 ↗
38. Evaluation of the mechanical behavior of pumice lightweight concrete reinforced with steel and polypropylene fibers10.1016/j.conbuildmat.2018.11.109 ↗
39. Optimizing the mixture design of polymer concrete: An experimental investigation10.1016/j.conbuildmat.2018.01.191 ↗
40. ASTM C39/C39M-16b, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, American Standards for Testing and Materials, 2016.
41. ASTM C496/C496M-11, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Standards for Testing and Materials, 2011.
42. ACI 544.2 R-89, Measurement of Properties of Fibre Reinforced Concrete. Part 5: Masonry, Precast Concrete and Special Processes, 1989.
43. ASTM C78, Standard Test Method for Flexural Strength of Concrete (using simple beam with third-point loading), American Standards for Testing and Materials, 2010.
44. ASTM C597-16, Standard Test Method for Pulse Velocity Through Concrete, American Standards for Testing and Materials, 2016.
45. Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC10.1016/j.conbuildmat.2017.04.181 ↗
46. ASTM C125-20, Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International, West Conshohocken, PA, 2020.
47. Mechanical properties of lightweight concrete made with coal ashes after exposure to elevated temperatures10.1016/j.cemconcomp.2016.05.028 ↗
48. Monolithic, “molded”, porous materials with high flow characteristics for separations, catalysis, or solid-phase chemistry: control of porous properties during polymerization10.1021/cm950437j ↗
49. Experimental study of the effects of geogrids on elasticity modulus, brittleness, strength, and stress-strain behavior of lime stabilized kaolinitic clay10.1016/j.grj.2017.02.001 ↗
50. Behaviour of Slurry Infiltrated Fibre Concrete (SIFCON) under triaxial compression10.1016/j.cemconres.2010.06.009 ↗
51. The impact of long-term curing period on the mechanical features of lime-geogrid treated soils
52. D. Garber, E. Shahrokhinasab, Performance Comparison of In-Service, Full-Depth Precast Concrete Deck Panels to Cast-in-Place Decks. Accelerated Bridge Construction University Transportation Center (ABC-UTC), 2019.
53. Time-dependant and long-term mechanical properties of concretes incorporation different grades of coarse recycled concrete aggregates10.1016/j.engstruct.2017.12.015 ↗
54. ACI 318, Building Code Requirement for Structure Concrete Practice (ACI 318-14) and Commentary, American Concrete Institute, 2014.
55. Design implications of current research on high-strength concrete
56. Mechanical properties of high-strength fiber reinforced concrete
57. A.M. Neville, Properties of Concrete Fifth and Final Edition, 2011.
58. Tensile strength of concrete
59. Structural properties of high strength concrete and its implications for precast prestressed concrete10.15554/pcij.11011985.92.119 ↗
60. Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks10.1016/j.ultras.2008.05.001 ↗
61. Evaluation of concrete made with crushed limestone aggregate based on ultrasonic pulse velocity10.1016/j.conbuildmat.2007.01.014 ↗
62. Characterization and hardening of concrete with ultrasonic testing10.1016/j.ultras.2004.01.053 ↗
63. Ultrasonic pulse velocity in concrete using direct and indirect transmission
64. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
65. Predictive equations for shear link modeling toward collapse10.1016/j.engstruct.2017.08.052 ↗
66. Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading10.1061/(ASCE)ST.1943-541X.0000376 ↗
67. Reliability-based design of steel moment frame structures isolated by lead-rubber bearing systems10.1016/j.istruc.2019.06.020 ↗
68. Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations
69. Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity10.1016/j.conbuildmat.2017.01.100 ↗
70. A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)10.1016/j.compstruct.2003.09.054 ↗
71. F. Akhoundi, M. Ghobeh, E. Ghiasvand, K. Akbari-Roshan, and S.A. Motahari, Performance characterization of a low-cost dual-channel camera-based microarray scanner, 24th Iranian Conference on Electrical Engineering (ICEE) (2016) 1534-1538 IEEE. https://doi.org/10.1109/IranianCEE.2016.7585765.10.1109/IranianCEE.2016.7585765 ↗