journal article·2020-12

Fabrication and performance evaluation of aminopropyl triethoxysilane-dopamine-MoS2 incorporated SBS modified asphalt

Yunhao Wei, Chengwei Hu, Yaseen Muhammad, Lishan Chen, Dali Zhou, Shanshan Wang, Jing Li, Qihang Chen

Publisher page

Abstract

Abstract In this study, a green and simple method was developed to deposit aminopropyl triethoxysilane-Dopamine (APs-DA) hybrid coating on the surface of MoS2 under mild reaction conditions using non-toxic reagents. The resulting composite (APs-DA-MoS2) was in turn used as a modifier to conventional styrene–butadienestyrene (SBS) modified asphalt. The deposition of APs-DA over MoS2 and spherical morphology of the composite was confirmed by Fourier transform infra-red (FT-IR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Thermogravimetric analysis (TGA) showed higher thermal stability (increased initial decomposition temperature by 28 °C) of APs-DA-MoS2 incorporated asphalt as compared to the pristine SBS modified asphalt. Fluorescence microscopy (FM) confirmed the development of a proper network structure in the APs-DA-MoS2 modified asphalt which contributed towards its enhanced mechanical, viscoelastic and thermal stability properties, resistance against rutting and fatigue performance as confirmed by dynamic shear rheological (DSR), multi stress creep and recovery (MSCR), time sweep and rotational viscosity (RV) tests. The elastic modulus (G') (46 °C, 10 Hz) of SBS modified asphalt was increased by 51.09% upon the incorporation of 0.08% APs-DA-MoS2. Attributed to the facile and environmentally benign synthesis approach, enhanced mechanical properties, thermal stability, resistance against rutting and fatigue performance, this study provides useful reference for the fabrication of APs-DA-MoS2 modified asphalt for practical applications in highway and construction industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Asphalt Pavement Performance Evaluation · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. A review on solutions for improving rutting resistance of asphalt pavement and test methods10.1016/j.conbuildmat.2018.02.151 ↗
2. Test evaluation of rutting performance indicators of asphalt mixtures10.1016/j.conbuildmat.2017.07.164 ↗
3. Energy-based crack initiation model for load-related top-down cracking in asphalt pavement10.1016/j.conbuildmat.2017.11.008 ↗
4. Low temperature cracking analysis of asphalt binders and mixtures10.1016/j.coldregions.2017.06.001 ↗
5. Improving aging resistance and fatigue performance of asphalt binders using inorganic nanoparticles10.1016/j.conbuildmat.2018.03.107 ↗
6. Inorganic nanoparticle-modified asphalt with enhanced performance at high temperature10.1061/(ASCE)MT.1943-5533.0001750 ↗
7. Influence of carbon nanotubes on performance properties and storage stability of SBS modified asphalt binders10.1061/(ASCE)MT.1943-5533.0001910 ↗
8. Studies on the properties of modified heavy calcium carbonate and SBS composite modified asphalt10.1016/j.conbuildmat.2019.05.139 ↗
9. Effect of polystyrene grafted graphene nanoplatelets on the physical and chemical properties of asphalt binder10.1016/j.conbuildmat.2018.04.082 ↗
10. Studies on the secondary modification of SBS modified asphalt by the application of octadecyl amine grafted graphene nanoplatelets as modifier10.1016/j.diamond.2018.08.011 ↗
11. Fabrication and properties of wide temperature domain pavement seaweed modified bio-bitumen10.1016/j.conbuildmat.2019.117079 ↗
12. Reinforcement and workability aspects of graphene-oxide-reinforced cement nanocomposites10.1016/j.compositesb.2018.10.030 ↗
13. Evaluation of Aging Resistance of Asphalt Binder Modified with Graphene Oxide and Carbon Nanotubes10.1061/(ASCE)MT.1943-5533.0002934 ↗
14. MoS2/polymer nanocomposites: preparation, properties, and applications10.1080/15583724.2017.1309662 ↗
15. Mechanical properties of epoxy nanocomposites filled with melamine functionalized molybdenum disulfide10.1039/C8RA02689K ↗
16. Anomalous nano-barrier effects of ultrathin molybdenum disulfide nanosheets for improving the flame retardance of polymer nanocomposites10.1039/C5TA01720C ↗
17. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
18. Dopamine-assisted co-deposition: an emerging and promising strategy for surface modification10.1016/j.cis.2018.04.011 ↗
19. Microplasma-assisted rapid, chemical oxidant-free and controllable polymerization of dopamine for surface modification10.1039/C7PY00805H ↗
20. Surface modification of aramid fibers by catechol/polyamine codeposition followed by silane grafting for enhanced interfacial adhesion to rubber matrix10.1021/acs.iecr.6b03177 ↗
21. Functionalization of halloysite nanotubes (HNTs) via mussel-inspired surface modification and silane grafting for HNTs/soy protein isolate nanocomposite film preparation10.1039/C7RA02987J ↗
22. Improved electromechanical properties of NBR dielectric composites by poly (dopamine) and silane surface functionalized TiO 2 nanoparticles10.1039/C6TC01504B ↗
23. Novel nitrile-butadiene rubber composites with enhanced thermal conductivity and high dielectric constant10.1016/j.compositesa.2019.05.015 ↗
24. Preparation and properties of aminated graphene fiber incorporated modified asphalt10.1016/j.conbuildmat.2019.116836 ↗
25. Preparation of octadecyl amine grafted over waste rubber powder (ODA-WRP) and properties of its incorporation in SBS-modified asphalt10.3390/polym11040665 ↗
26. Novel electrochemical sensing platform based on molybdenum disulfide nanosheets-polyaniline composites and Au nanoparticles10.1016/j.snb.2013.12.106 ↗
27. Effect of mixing sequences of γ-piperazine propylmethyl dimethoxysilane on the tracking and erosion resistance of silicone rubber10.1016/j.polymertesting.2017.12.031 ↗
28. A modified mussel-inspired method to fabricate TiO2 decorated superhydrophilic PVDF membrane for oil/water separation10.1016/j.memsci.2016.01.053 ↗
29. Anticorrosive epoxy coatings based on polydopamine modified molybdenum disulfide10.1016/j.porgcoat.2019.04.056 ↗
30. Synthesis of molybdenum disulfide (MoS2) for lithium ion battery applications10.1016/j.materresbull.2009.05.018 ↗
31. An X-ray photoelectron spectroscopy study of the bonding of unsaturated organic molecules to the Si (001) surface10.1016/S0039-6028(98)00507-X ↗
32. A strong integrated strength and toughness artificial nacre based on dopamine cross-linked graphene oxide10.1021/nn503755c ↗
33. Codepositing mussel-inspired nanohybrids onto one-dimensional fibers under “Green” conditions for significantly enhanced surface/interfacial properties10.1021/acssuschemeng.8b00290 ↗
34. Two-dimensional molybdenum disulfide as a superb adsorbent for removing Hg2+ from water10.1021/acssuschemeng.7b01880 ↗
35. A noncovalent functionalization approach to improve the dispersibility and properties of polymer/MoS2 composites10.1016/j.apsusc.2014.07.136 ↗
36. Synthesis of polyacrylamide immobilized molybdenum disulfide (MoS2@ PDA@ PAM) composites via mussel-inspired chemistry and surface-initiated atom transfer radical polymerization for removal of copper (II) ions10.1016/j.jtice.2017.12.027 ↗
37. Hydrodesulfurization of dibenzothiophene using Pd-promoted Co–Mo/Al 2 O 3 and Ni–Mo/Al 2 O 3 catalysts coupled with ionic liquids at ambient operating conditions10.1039/C9RA00095J ↗
38. Boosting the hydrodesulfurization of dibenzothiophene efficiency of Mn decorated (Co/Ni)-Mo/Al2O3 catalysts at mild temperature and pressure by coupling with phosphonium based ionic liquids10.1016/j.cej.2019.121957 ↗
39. D. ASTM, 113, “Standard Test Method for Ductility of Asphalt Materials”, Annu Book Am Soc Test Mater (ASTM) Stand 1(1) (2017).
40. Astm · 2013
41. Astm · 2014
42. China · 2011
43. Preparation and properties of sbs-g-gos-modified asphalt based on a thiol-ene click reaction in a bituminous environment10.3390/polym10111264 ↗
44. Microwave assisted fabrication of polymethyl methacrylate-graphene composite nanoparticles applied for the preparation of SBS modified asphalt with enhanced high temperature performance
45. Synthesis and evaluation of high-temperature properties of butylated graphene oxide composite incorporated SBS (C4H9-GO/SBS)-modified asphalt10.1002/app.48231 ↗
46. High and low temperature properties of nano-particles/polymer modified asphalt10.1016/j.conbuildmat.2016.03.118 ↗
47. Aashto · 2009
48. Enhancing effect of microalgae biodiesel incorporation on the performance of crumb Rubber/SBS modified asphalt10.1016/j.jclepro.2019.117725 ↗
49. Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt10.1016/j.jclepro.2018.01.171 ↗
50. Preparation and characterization of waterborne epoxy modified bitumen emulsion as a potential high-performance cold binder10.1016/j.jclepro.2019.06.267 ↗
51. Investigating impacts of warm-mix asphalt technologies and high reclaimed asphalt pavement binder content on rutting and fatigue performance of asphalt binder through MSCR and LAS tests10.1016/j.jclepro.2019.02.131 ↗
52. High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests
53. Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber10.1016/j.jclepro.2016.09.043 ↗
54. Performance evaluation of modified asphalt based trackless tack coat materials10.1016/j.conbuildmat.2017.12.187 ↗
55. Constitutive modeling of fatigue damage response of asphalt concrete materials with consideration of micro-damage healing10.1016/j.ijsolstr.2013.05.007 ↗
56. D. ASTM D, Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test), USA: Annual Book of ASTM Standards (2012).
57. A. D-13, Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV), USA: Annual Book of ASTM Standards (2013).
58. Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil10.1016/j.conbuildmat.2018.06.001 ↗
59. Fatigue and healing properties of nano-reinforced bituminous binders10.1016/j.ijfatigue.2015.05.008 ↗
60. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer
61. Use of tung oil as a rejuvenating agent in aged asphalt: Laboratory evaluations10.1016/j.conbuildmat.2019.117783 ↗
62. Preparation of expanded graphite/polyethylene glycol composite phase change material for thermoregulation of asphalt binder10.1016/j.conbuildmat.2018.02.167 ↗
63. Preparation and properties of soybean bio-asphalt/SBS modified petroleum asphalt10.1016/j.conbuildmat.2018.12.206 ↗
64. Discriminating wavenumbers selection of ATR-FTIR spectra for identifying graded asphalt10.1016/j.conbuildmat.2019.04.068 ↗
65. Rapid and simultaneous determination of physical and chemical properties of asphalt by ATR-FTIR spectroscopy combined with a novel calibration-free method10.1016/j.conbuildmat.2019.116950 ↗
66. Measurement of water resistance of asphalt based on surface free energy analysis using stripping work between asphalt-aggregate system10.1016/j.conbuildmat.2018.05.055 ↗
67. Investigation on high-viscosity asphalt binder for permeable asphalt concrete with waste materials10.1016/j.jclepro.2019.04.010 ↗
68. Analysis of virgin asphalt brands via the integrated application of FTIR and gel permeation chromatography
69. Investigating effects of using nanomaterial on moisture susceptibility of hot-mix asphalt using mechanical and thermodynamic methods10.1016/j.conbuildmat.2016.11.052 ↗
70. Properties of polystyrene grafted activated waste rubber powder (PS-ARP) composite SBS modified asphalt10.1016/j.conbuildmat.2019.117737 ↗
71. Understanding the intrinsic water wettability of molybdenum disulfide (MoS2)10.1021/acs.langmuir.5b02057 ↗
72. The influence of molybdenum disulfide nanoplatelets on the dispersion of nano silica in natural rubber composites10.1016/j.apsusc.2015.10.172 ↗