journal article·2020-10Open access

Solidification of waste excavation clay using reactive magnesia, quicklime, sodium carbonate and early-age oven curing

Shaoqin Ruan, Shuang Liang, Gediminas Kastiukas, Weiping Zhu, Xiangming Zhou

Abstract

Abstract Kaolin production requires large amounts of excavation waste to be removed, with each tonne of kaolin recovered typically producing up to 9 tonnes of waste. This study introduced quicklime (i.e., CaO), reactive magnesia (i.e., MgO) and sodium carbonate, together with an early-age oven curing regime as a means of re-using kaolin excavation waste to produce more sustainable cementitious materials. The strength development of solidified clay samples was measured and later interpreted by pH tests, porosity measurement, Fourier-Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy-Energy-dispersive X-ray spectroscopy (SEM-EDX). Besides, the environmental impacts with respect to the production of additives for clay solidification were also calculated. The results indicated that the incorporation of CaO and MgO effectively solidified the clay with acceptable compressive strength (CaO group: 12.2 MPa; MgO group: 20.3 MPa after 28 days). Meanwhile, given the strength development of samples investigated in this study, the morphology of hydration phases could be possibly more important than their contents and sample porosity. Furthermore, with the introduction of 3 days of oven curing, MgO took advantage over CaO in clay solidification, which was attributed to the formation of fibrous crystals (i.e., nesquehonite) and fewer micro-cracks. Finally, from a perspective of ‘greenness’ and sustainability, MgO is a more favorable additive than CaO and PC in soil solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
2. Mechanical and durability properties of high performance concretes containing supplementary cementitious materials10.1016/j.conbuildmat.2009.08.045 ↗
3. Sherwood · 1993
4. Suitability of natural calcined clays as supplementary cementitious material10.1016/j.cemconcomp.2018.07.006 ↗
5. Influence of aging conditions upon the properties of calcined clay and its performance as supplementary cementitious material10.1016/j.cemconcomp.2016.05.020 ↗
6. Comparative life cycle assessment of reactive MgO and Portland cement production10.1016/j.jclepro.2016.07.071 ↗
7. Higgins · 2007
8. Synthesis of high alumina cement based on metallurgy wastes10.1088/1757-899X/687/2/022034 ↗
9. Characterization of alkali activated kaolinitic clay10.1016/j.clay.2013.02.005 ↗
10. Shear strength behaviour of compacted clayey soils percolated with an alkaline solution10.1016/j.enggeo.2009.07.012 ↗
11. Role of clay minerals content and calcite in alkali activation of low-grade multimineral clays10.1061/(ASCE)MT.1943-5533.0003255 ↗
12. Development of precast geopolymer concrete via oven and microwave radiation curing with an environmental assessment
13. Biochar sequestration in lime-slag treated synthetic soils: a green approach to ground improvement10.1061/(ASCE)MT.1943-5533.0001113 ↗
14. Effects of curing environment on the strength and mineralogy of lime-GGBS–treated acid sulphate soils10.1061/(ASCE)MT.1943-5533.0000887 ↗
15. Green remediation of As and Pb contaminated soil using cement-free clay-based stabilization/solidification10.1016/j.envint.2019.02.057 ↗
16. Durability, strength, and stiffness of dispersive clay–lime blends10.1061/(ASCE)MT.1943-5533.0001632 ↗
17. Incorporation of reactive magnesia and quicklime in sustainable binders for soil stabilisation10.1016/j.enggeo.2015.05.025 ↗
18. Magnesia reactivity on activating efficacy for ground granulated blastfurnace slag for soft clay stabilisation10.1016/j.clay.2016.02.033 ↗
19. Leaching and microstructural properties of lead contaminated kaolin stabilized by GGBS-MgO in semi-dynamic leaching tests10.1016/j.conbuildmat.2018.03.164 ↗
20. Engineering properties of vertical cutoff walls consisting of reactive magnesia-activated slag and bentonite: workability, strength, and hydraulic conductivity10.1061/(ASCE)MT.1943-5533.0002908 ↗
21. Novel synergy of Si-rich minerals and reactive MgO for stabilisation/solidification of contaminated sediment10.1016/j.jhazmat.2018.11.067 ↗
22. Property changes of reactive magnesia–stabilized soil subjected to forced carbonation10.1139/cgj-2015-0135 ↗
23. Mechanism of reactive magnesia–ground granulated blastfurnace slag (GGBS) soil stabilization10.1139/cgj-2015-0183 ↗
24. Influence of supplementary cementitious materials on the performance and environmental impacts of reactive magnesia cement concrete10.1016/j.jclepro.2017.05.044 ↗
25. Zeolite P in cements: its potential for immobilizing toxic and radioactive waste species10.1016/0956-053X(95)00015-R ↗
26. Comparison of reactive magnesia, quick lime, and ordinary Portland cement for stabilization/solidification of heavy metal-contaminated soils10.1016/j.scitotenv.2019.03.270 ↗
27. Stabilization/solidification of lead-and zinc-contaminated soils using MgO and CO210.1016/j.jcou.2019.05.029 ↗
28. Development of reactive MgO-based Engineered Cementitious Composite (ECC) through accelerated carbonation curing10.1016/j.conbuildmat.2018.09.196 ↗
29. Mechanical properties and rapid chloride permeability of carbonated concrete containing reactive MgO10.1016/j.conbuildmat.2018.03.223 ↗
30. Characterization of Mg components in reactive MgO–Portland cement blends during hydration and carbonation10.1016/j.jcou.2018.08.025 ↗
31. Accelerated carbonation of reactive MgO and Portland cement blends under flowing CO2 gas10.1016/j.cemconcomp.2019.103489 ↗
32. Influence of mix design on the carbonation, mechanical properties and microstructure of reactive MgO cement-based concrete10.1016/j.cemconcomp.2017.03.004 ↗
33. Unluer · 2012
34. Fiber-reinforced reactive magnesia-based tensile strain-hardening composites10.1016/j.cemconcomp.2018.03.002 ↗
35. Comparison of the environmental impacts of reactive magnesia and calcined dolomite and their performance under different curing conditions10.1061/(ASCE)MT.1943-5533.0002471 ↗
36. ASTM, C25-06. Standard test methods for chemical analysis of limestone, quicklime and hydrated lime, ASTM International, West Conshohocken, PA, Vol. 10, 2019.
37. ASTM, C109-13A. Standard test method for compressive strength of hydraulic cement mortars ASTM, Philadelphia, PA, USA, 2013.
38. ASTM, C642, Standard test method for density, absorption, and voids in hardened concrete, Annual Book of ASTM Standards 4, 2006.
39. Comparative life cycle assessment of conventional and new fused magnesia production10.1016/j.jclepro.2014.12.043 ↗
40. M. Spielmann, C. Bauer, R. Dones, M. Tuchschmid, Life cycle inventories of transport services Ecoinvent v 2.0, report.
41. D. Kellenberger, H.-J. Althaus, N. Jungbluth, T. Künniger, M. Lehmann, P. Thalmann, Life cycle inventories of building products, Final report ecoinvent data v2. 0 No, 2007.
42. Comparative analysis of available life cycle inventories of cement in the EU10.1016/j.cemconres.2003.12.020 ↗
43. Identifying improvement potentials in cement production with life cycle assessment10.1021/es100771k ↗
44. ATILH, Methodology for yearly declaration of pollutant emissions in French cement industry, Hydraulic binder industries union, association technique des liants hydrauliques (in French), 2003.
45. Development of low pH cement systems forming magnesium silicate hydrate (MSH)10.1016/j.cemconres.2011.01.016 ↗
46. Strength and hydration products of reactive MgO–silica pastes10.1016/j.cemconcomp.2014.04.003 ↗
47. Neville · 1995
48. The thermal evolution of metakaolin geopolymers: Part 2–Phase stability and structural development10.1016/j.jnoncrysol.2007.02.050 ↗
49. Dolomite used as raw material to produce MgO-based expansive agent10.1016/j.cemconres.2004.09.026 ↗
50. Production of MgO-type expansive agent in dam concrete by use of industrial by-products10.1016/j.buildenv.2007.01.037 ↗
51. MgO expansive cement and concrete in China: past, present and future10.1016/j.cemconres.2013.12.007 ↗
52. Effects of calcination condition on expansion property of MgO-type expansive agent used in cement-based materials10.1016/j.cemconres.2009.09.025 ↗
53. Improving efficiency of calcium oxide expansive additives by polylactic acid film10.1680/jmacr.15.00529 ↗
54. JTJ 034-2000. Technical specifications for construction of highway roadbases (in Chinese), 2000.
55. Performance and microstructural development of MgO–SiO2 binders under different curing conditions10.1016/j.conbuildmat.2017.08.020 ↗
56. Microstructural and mechanical properties of marine soft clay stabilized by lime-activated ground granulated blastfurnace slag10.1016/j.clay.2014.11.005 ↗
57. Comparison of reactive magnesia-and carbide slag-activated ground granulated blastfurnace slag and Portland cement for stabilisation of a natural soil10.1016/j.clay.2015.03.023 ↗
58. Resistance of MgO-GGBS and CS-GGBS stabilised marine soft clays to sodium sulfate attack10.1680/geot.14.T.012 ↗
59. Effect of alkalis on fresh C-S–H gels10.1016/j.cemconres.2009.01.003 ↗
60. Effect of drying procedures on pore structure and phase evolution of alkali-activated cements10.1016/j.cemconcomp.2018.12.003 ↗
61. F. Jin, A. Abdollahzadeh, A. Al-Tabbaa, Effect of different MgOs on the hydration of MgO-activated granulated ground blast furnace slag paste, in: Proceeding of 3rd international conference on sustainable construction materials and technologies, Kyoto, Japan 2013.
62. Strength and drying shrinkage of reactive MgO modified alkali-activated slag paste10.1016/j.conbuildmat.2013.10.081 ↗
63. Characterization of calcium-containing phases in alkali-activated municipal solid waste incineration bottom ash binder through chemical extraction and deconvoluted Fourier transform infrared spectra10.1016/j.jclepro.2018.05.049 ↗
64. Effect of temperature on the microstructure of calcium silicate hydrate (CSH)10.1016/j.cemconres.2013.06.008 ↗
65. The use of microbial induced carbonate precipitation in healing cracks within reactive magnesia cement-based blends10.1016/j.cemconres.2018.10.018 ↗
66. Effect of air entrainment on the performance of reactive MgO and PC mixes10.1016/j.conbuildmat.2017.03.068 ↗
67. Sequential formation of natrolite-group zeolites in amygdules of basaltic lavas10.3749/canmin.1500036 ↗
68. Influence of hydrothermal synthesis conditions on the formation of calcium silicate hydrates: from amorphous to crystalline phases10.1007/s11595-018-1947-0 ↗
69. Novel technique for phosphorus recovery from aqueous solutions using amorphous calcium silicate hydrates (A-CSHs)10.1016/j.watres.2013.01.052 ↗
70. Shand · 2006
71. Autogenous healing of fiber-reinforced reactive magnesia-based tensile strain-hardening composites
72. Chemical, microstructural and strength development of calcium and magnesium carbonate binders10.1016/j.cemconres.2009.02.003 ↗
73. Ruan · 2019
74. Estimation of CO2 emissions from China’s cement production: methodologies and uncertainties10.1016/j.enpol.2013.01.028 ↗