Influence of Topology of Highly Porous Methacrylate Polymers on their Mechanical Properties
Source abstract
Abstract
Abstract Porous polymer monoliths are prepared using glycidyl methacrylate and methyl methacrylate as monomers, in both cases crosslinked with ethylene glycol dimethacrylate. Up to 75% porous samples are produced using either emulsion templating or bulk polymerization with porogens. In the case of emulsion templating, a cellular topology with cavities between 3.1 and 5.5 µm is observed for both monomers, while a cauliflower‐like topology is formed in the case of bulk polymerization. The influence of topology features of monoliths on the mechanical properties is studied and for both polymers a dramatic influence, on both compressive moduli and compressive strength, is found. The mechanical parameters, namely elastic modulus and compressive strength are significantly higher for emulsion templated samples.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Pickering emulsions and particle stabilization · Botulinum Toxin and Related Neurological Disorders · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Chemistry and Chemical Engineering PolyOrgLab University of Maribor Smetanova 17 SI‐2000 Maribor Slovenia
Institute of Macromolecular Chemistry Czech Academy of Sciences Heyrovského nám. 2 CZ‐162 06 Praha 6 Czech Republic
Institute of Chemical Process Fundamentals Department of Catalysis and Reaction Engineering Czech Academy of Sciences Rozvojová 135 CZ‐165 02 Praha Czech Republic
Funding
Javna Agencija za Raziskovalno Dejavnost RS · Ministerstvo Školství, Mládeže a Tělovýchovy
References (39)
Show source-provided references
1. 10.1016/j.reactfunctpolym.2014.02.01110.1016/j.reactfunctpolym.2014.02.011 ↗
2. 10.1016/j.apsusc.2010.02.05310.1016/j.apsusc.2010.02.053 ↗
3. 10.1016/j.coche.2014.03.00110.1016/j.coche.2014.03.001 ↗
4. 10.1002/(SICI)1097-0290(19990105)62:1<30::AID-BIT4>3.0.CO;2-E10.1002/(SICI)1097-0290(19990105)62:1<30::AID-BIT4>3.0.CO;2-E ↗
5. 10.1016/j.snb.2014.06.02310.1016/j.snb.2014.06.023 ↗
6. 10.1002/jssc.20130040610.1002/jssc.201300406 ↗
7. 10.1016/j.foodchem.2013.04.10010.1016/j.foodchem.2013.04.100 ↗
8. 10.1002/jssc.20120109010.1002/jssc.201201090 ↗
9. 10.1016/j.polymer.2013.09.01910.1016/j.polymer.2013.09.019 ↗
10. 10.1016/j.chroma.2012.11.05710.1016/j.chroma.2012.11.057 ↗
11. 10.1021/ac802359e10.1021/ac802359e ↗
12. 10.1016/j.chroma.2005.11.10710.1016/j.chroma.2005.11.107 ↗
13. Pulko I. · Encycl. Polym. Sci. Technol. · 2017 · 1
14. 10.1016/j.polymer.2014.07.00710.1016/j.polymer.2014.07.007 ↗
15. 10.1016/j.chroma.2007.01.00310.1016/j.chroma.2007.01.003 ↗
16. 10.1016/j.reactfunctpolym.2012.06.01510.1016/j.reactfunctpolym.2012.06.015 ↗
17. 10.1016/j.progpolymsci.2013.07.00310.1016/j.progpolymsci.2013.07.003 ↗
18. 10.1002/marc.20120039310.1002/marc.201200393 ↗
19. 10.1039/b809346f10.1039/b809346f ↗
20. 10.1016/j.polymer.2010.11.00610.1016/j.polymer.2010.11.006 ↗
21. 10.1002/macp.20110022910.1002/macp.201100229 ↗
22. 10.1016/j.polymer.2006.03.11410.1016/j.polymer.2006.03.114 ↗
23. 10.1021/ma052705x10.1021/ma052705x ↗
24. 10.1016/j.polymer.2006.09.02210.1016/j.polymer.2006.09.022 ↗
25. 10.1002/pola.2287810.1002/pola.22878 ↗
26. 10.1039/b807095d10.1039/b807095d ↗
27. Kovacˇicˇ S. · Polym. Chem. · 2012 · 3 · 32510.1039/C2PY00518B ↗
28. 10.1002/marc.20130001610.1002/marc.201300016 ↗
29. 10.1021/la00092a02610.1021/la00092a026 ↗
30. 10.1039/C0PY00374C10.1039/C0PY00374C ↗
31. 10.1002/pola.2636510.1002/pola.26365 ↗
32. 10.1021/am405138e10.1021/am405138e ↗
33. 10.1021/ie050298810.1021/ie0502988 ↗
34. 10.1002/pola.2216010.1002/pola.22160 ↗
35. 10.1016/j.polymer.2005.05.02210.1016/j.polymer.2005.05.022 ↗
36. 10.1007/3-540-60484-7_410.1007/3-540-60484-7_4 ↗
37. 10.1002/jssc.20070028410.1002/jssc.200700284 ↗
38. 10.1002/jssc.20080018910.1002/jssc.200800189 ↗
39. 10.1039/a803757d10.1039/a803757d ↗