journal article·2021-02

Mechanical and thermal properties of artificial stone finishing materials mixed with PCM impregnated lightweight aggregate and carbon material

Young Uk Kim, Ji Hun Park, Beom Yeol Yun, Sungwoong Yang, Seunghwan Wi, Sumin Kim

Publisher page

Abstract

Abstract In this study, lightweight aggregates and carbon materials were impregnated with a phase change material (PCM) to improve the thermal performance of artificial stone used as an interior finishing material. The PCM used was n-octadecane; the carbon materials used in the mixture were exfoliated graphite nanoplatelets, activated carbon, and biochar. The compressive strength was slightly lower in the specimens with PCM; it was found that PCM can affect the adhesion of the cement paste and aggregate. When carbon materials are used in the mixtures, the thermal conductivity is improved. Depending on the type and amount of carbon material added, the thermal conductivity can be improved and the peak temperature adjusted. The combination of PCM and carbon materials allows for high latent heat capacity, efficient use of thermal energy through efficient storage and release, sustainable thermal stability and durability, and peak temperature control.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Energy Systems and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Production and characterization of a novel artificial stone using brick residue and quarry dust in epoxy matrix10.1016/j.jmrt.2018.08.012 ↗
2. Indoor thermal comfort assessment using PCM based storage system integrated with ceiling fan ventilation: Experimental design and response surface approach10.1016/j.enbuild.2019.02.020 ↗
3. An innovative PCM system for thermal comfort improvement and energy demand reduction in building under different climate conditions10.1016/j.scs.2018.09.008 ↗
4. Determination of heat transfer coefficients in direct contact latent heat storage systems10.1016/j.applthermaleng.2018.09.015 ↗
5. Optical and thermal performance of glazing units containing PCM in buildings: A review10.1016/j.conbuildmat.2019.117327 ↗
6. A polyethylene glycol/hydroxyapatite composite phase change material for thermal energy storage
7. Comparative analysis of the PCM application according to the building type as retrofit system10.1016/j.buildenv.2019.01.048 ↗
8. Phase change materials and thermal energy storage for buildings10.1016/j.enbuild.2015.06.007 ↗
9. Numerical investigation of phase change materials (PCM) optimal melting properties and position in building elements under diverse conditions10.1016/j.conbuildmat.2019.07.199 ↗
10. Potential of ventilation systems with thermal energy storage using PCMs applied to air conditioned buildings10.1016/j.renene.2019.01.026 ↗
11. Application of PCM energy storage in combination with night ventilation for space cooling10.1016/j.apenergy.2015.08.088 ↗
12. Experimental study of the thermal protection performance of the high reflectivity-phase change material (PCM) roof in summer10.1016/j.buildenv.2019.106381 ↗
13. PCM cooling ceilings in the Energy Efficiency Center – Regeneration behaviour of two different system designs10.1016/j.enbuild.2017.09.010 ↗
14. Studies on the mechanical properties and thermal behavior of microencapsulated eutectic mixture in gypsum composite board for thermal regulation in the buildings10.1016/j.jobe.2020.101400 ↗
15. Experimental investigation of thermal performance of microencapsulated PCM-contained wallboard by two measurement modes
16. Compressive strength and hygric properties of concretes incorporating microencapsulated phase change material10.1016/j.conbuildmat.2019.06.156 ↗
17. PCM-mortar based construction materials for energy efficient buildings: A review on research trends10.1016/j.enbuild.2017.09.098 ↗
18. Influence of adding phase change materials on the physical and mechanical properties of cement mortars10.1016/j.conbuildmat.2016.09.119 ↗
19. Thermal and sound properties of concrete mixed with high porous aggregates from manufacturing waste impregnated with phase change material10.1016/j.jobe.2019.101111 ↗
20. Climatic cycling assessment of red clay/perlite and vermiculite composite PCM for improving thermal inertia in buildings10.1016/j.buildenv.2019.106464 ↗
21. Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink10.1016/j.applthermaleng.2019.04.072 ↗
22. A cost-effective method to improve the performance of solar air heaters using discrete macro-encapsulated PCM capsules for drying applications10.1016/j.applthermaleng.2018.10.055 ↗
23. Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars10.1016/j.cemconres.2019.02.002 ↗
24. Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications10.1016/j.enconman.2016.11.061 ↗
25. n-Phase micromechanical framework for the conductivity and elastic modulus of particulate composites: Design to microencapsulated phase change materials (MPCMs)-cementitious composites
26. Development and optimisation of phase change material-impregnated lightweight aggregates for geopolymer composites made from aluminosilicate rich mud and milled glass powder10.1016/j.conbuildmat.2016.02.029 ↗
27. Producing of workable structural lightweight concrete by partial replacement of aggregate with yellow and/or red crushed clay brick (CCB) aggregate, J. King Saud Univ. -
28. Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems10.1016/j.conbuildmat.2015.04.031 ↗
29. Thermal properties of lightweight concrete incorporating high contents of phase change materials10.1016/j.conbuildmat.2019.02.152 ↗
30. Use of burnt clay aggregate as phase change material carrier to improve thermal properties of concrete panel
31. Preparation, thermal characterization and examination of phase change materials (PCMs) enhanced by carbon-based nanoparticles for solar thermal energy storage10.1016/j.est.2019.100874 ↗
32. Effects of various carbon additives on the thermal storage performance of form-stable PCM integrated cementitious composites10.1016/j.applthermaleng.2018.11.025 ↗
33. Characterisation and thermophysical properties of graphene nanoparticles dispersed erythritol PCM for medium temperature thermal energy storage applications10.1016/j.tca.2019.03.037 ↗
34. Technology and method for applying biochar in building materials to evidently improve the carbon capture ability
35. Development of heat storage gypsum board with paraffin-based mixed SSPCM for application to buildings10.1080/01694243.2016.1215011 ↗
36. Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage10.1016/j.matlet.2016.12.052 ↗
37. Development of thermal energy storage cementitious composites (TESC) containing a novel paraffin/hydrophobic expanded perlite composite phase change material10.1016/j.solener.2017.09.064 ↗
38. Fabrication and stability of form-stable diatomite/paraffin phase change material composites
39. ASTM C230, Standard SpecificCation for Flow Table for Use in Tests of Hydraulic Cement 1, Annu. B. ASTM Stand. (2010). https://doi.org/10.1520/C0230.
40. ISO 8301, ISO 8301:1991. Thermal insulation: Determination of steady-state thermal resistance and related properties. Heat flow meter apparatus, Int. Organ. Stand. (1991).
41. Biochar-red clay composites for energy efficiency as eco-friendly building materials: Thermal and mechanical performance