Effect of partial substitution of corn straw fly ash for fly ash as supplementary cementitious material on the mechanical properties of cemented coal gangue backfill
Source abstract
Abstract
Abstract Cemented coal gangue backfill (CCGB) is an engineering mixture that can effectively solve the surface subsidence problem, and comprises coal gangue and cementitious materials. However, there are many constraints regarding cost, performance, and other engineering indicators of CCGB. To optimize the performance, reduce the cost, and recycle agricultural solid waste, the replacement of fly ash in the raw material with the equal weight of corn straw fly ash (CSFA) was studied. The effects of adding CSFA on the uniaxial compressive strength (UCS), surface crack propagation, acoustic emission characteristics, shear strength, drying shrinkage, and microstructure of the CCGB were investigated experimentally by setting different substitution amounts (0, 10, 20, 30, and 40 wt%) and curing ages. The results show that CSFA can be used to replace up to 40 wt% of the fly ash in CCGB, and help improve the mechanical properties of CCGB, subject to the adverse effects of drying shrinkage. At higher substitution amounts, the UCS and shear strength were found to increase. Furthermore, the specimen exhibited a double-crack failure on the surface and X-shaped failure inside; otherwise, a single-crack failure on the surface and single-slope failure were observed. Compared to fly ash, CSFA has a coarser particle size, higher pozzolanic reactivity, more reactive silica/alumina, and later reaction stage as a supplementary cementitious material in CCGB. This introduction of CSFA into CCGB provides an excellent example of green and sustainable development.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill10.1016/j.matlet.2005.06.042 ↗
2. Subsidence prediction method based on equivalent mining height theory for solid backfilling mining10.1016/S1003-6326(14)63470-1 ↗
3. Thermal, hydraulic and mechanical performances of cemented coal gangue-fly ash backfill10.1016/j.minpro.2017.03.001 ↗
4. Surface subsidence due to underground mining operation under weak geological condition in Indonesia10.1016/j.jrmge.2015.01.007 ↗
5. Subsidence control and farmland conservation by solid backfilling mining technology10.1016/S1003-6326(12)61659-8 ↗
6. Prediction of compression and deformation behaviours of gangue backfill materials under multi-factor coupling effects for strata control and pollution reduction10.1007/s11356-020-09465-x ↗
7. Performance of cemented coal gangue backfill10.1007/s11771-007-0043-y ↗
8. ‘Optical-acoustic-stress’ responses in failure progress of cemented gangue-fly ash backfill material under uniaxial compression10.1080/10589759.2019.1576175 ↗
9. Effect of calcined hard kaolin dosage on the strength development of CPB of fine tailings with sulphide
10. Effects of red mud additions on gangue-cemented paste backfill properties10.1016/j.powtec.2020.03.055 ↗
11. Effects of corn stalk fly ash (CSFA) on the mechanical and deformation properties of cemented coal gangue backfill10.1155/2020/7421769 ↗
12. Vegetable ashes as supplementary cementitious materials10.1016/j.cemconres.2017.08.015 ↗
13. Green concrete partially comprised of farming waste residues: a review10.1016/j.jclepro.2016.01.022 ↗
14. Pozzolanic activity of elephant grass ash and its influence on the mechanical properties of concrete10.1016/j.cemconcomp.2014.09.019 ↗
15. Characterization and use of an untreated Mexican sugarcane bagasse ash as supplementary material for the preparation of ternary concretes10.1016/j.conbuildmat.2017.09.060 ↗
16. Green concrete partially comprised of rice husk ash as a supplementary cementitious material – A comprehensive review10.1016/j.rser.2017.10.081 ↗
17. Atta-ur-Rehman, Z
18. Effects of corn stalk fiber content on properties of biomass brick10.1016/j.conbuildmat.2016.09.141 ↗
19. Life cycle environmental impacts of cornstalk briquette fuel in China10.1016/j.apenergy.2017.01.071 ↗
20. Experience of producing natural gas from corn straw in China10.1016/j.resconrec.2017.10.005 ↗
21. Enrichment of thermophilic and mesophilic microbial consortia for efficient degradation of corn stalk10.1016/j.jes.2018.07.010 ↗
22. Evaluation of the pozzolanicity of nanostructured sol-gel silica and silica fume by electrical conductivity measurement10.1016/j.conbuildmat.2017.11.042 ↗
23. Sustainable nanocomposites of epoxy and silica xerogel synthesized from corn stalk ash: Enhanced thermal and acoustic insulation performance10.1016/j.compositesb.2018.05.039 ↗
24. Pozzolanic activity of corn straw leaf ash produced at different temperatures and treated with portlandite solution10.15376/biores.15.4.8708-8727 ↗
25. Microstructure and microanalysis of hardened ordinary Portland cement pastes10.1007/BF00349061 ↗
26. The nature of C-S-H in hardened cements10.1016/S0008-8846(99)00168-4 ↗
27. Multiphase pozzolanic reaction model of low-calcium fly ash in cement systems10.1016/j.cemconres.2019.04.015 ↗
28. Eco-friendly treatment of low-calcium coal fly ash for high pozzolanic reactivity: A step towards waste utilization in sustainable building material10.1016/j.jclepro.2019.117962 ↗
29. A study of technical measures for increasing the roof-contacted ratio in stope and cavity filling10.5539/jmsr.v5n1p54 ↗
30. An experimental investigation into the compaction characteristic of granulated gangue backfilling materials modified with binders10.1007/s12665-018-7474-7 ↗
31. MOHURD of China · 2006
32. Bearing mechanism and stability monitoring of cemented gangue-fly ash backfill column with stirrups in partial backfill engineering10.1016/j.engstruct.2019.03.061 ↗
33. Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects10.1016/0008-8846(95)00165-4 ↗
34. Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays10.1016/j.cemconres.2016.02.015 ↗
35. Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis10.1016/j.cemconcomp.2017.07.009 ↗
36. GAQSIQ of China · 2014
37. GAQSIQ of China · 2017
38. GAQSIQ of China · 2017
39. MOHURD of China · 2016
40. MOHURD of China · 2019
41. MOHURD of China · 2009
42. MLR of China, DZ/T 0276.25: Regulation for testing the physical and mechanical properties of rock, Part 25: Test for determining the shear strength of rock, Ministry of Land and Resources of China, Beijing, China, 2015.
43. Failure characteristics of large unconfined cemented gangue backfill structure in partial backfill mining10.1016/j.conbuildmat.2018.11.038 ↗
44. Coupled effect of curing temperature and age on compressive behavior, microstructure and ultrasonic properties of cemented tailings backfill10.1016/j.conbuildmat.2019.117738 ↗
45. Assessment of the effects of rice husk ash particle size on strength, water permeability and workability of binary blended concrete10.1016/j.conbuildmat.2010.04.045 ↗
46. Hardened properties of self-consolidating high performance concrete including rice husk ash10.1016/j.cemconcomp.2010.07.006 ↗
47. Strength of composite flysch samples under uniaxial compression10.1007/s10064-017-1009-4 ↗
48. A hypothesis on modes of failure of rock samples tested in uniaxial compression10.1007/s00603-006-0096-5 ↗
49. Acoustic emission investigation of cemented paste backfill prepared with tantalum–niobium tailings10.1016/j.conbuildmat.2019.117523 ↗
50. Acoustic emission and ultrasonic characteristics in the failure process of cemented waste concrete-coal gangue backfilling (CWCGB) under uniaxial loading10.1155/2018/8960806 ↗
51. Loading rate effect on uniaxial compressive strength behavior and acoustic emission properties of cemented tailings backfill10.1016/j.conbuildmat.2019.04.082 ↗
52. Effect of particle morphology on mechanical behavior of rock mass10.1007/s12517-020-05680-5 ↗
53. Surface morphology of structural plane and effects of the shear strength parameters10.1155/2018/5712403 ↗
54. A study on creep and drying shrinkage of high performance concrete10.1016/S0008-8846(01)00539-7 ↗
55. Lechugilla natural fiber as internal curing agent in self compacting concrete (SCC): Mechanical properties, shrinkage and durability10.1016/j.cemconcomp.2020.103686 ↗
56. Influence of curing time on the drying shrinkage of concretes with different binders and water-to-binder ratios10.1155/2017/2619749 ↗