Surface properties of clay brick powder and its influence on hydration and strength development of cement paste
Source abstract
Abstract
Abstract Replacing part of cement with recycled clay brick powder (CBP) can ease the environmental impact caused by construction waste disposal and cement production. This research studied the surface properties of CBP and its effect on the hydration and strength development of cement paste at the micro and sub-micro scales. Zeta potential measurement was applied to study the surface chemical properties of CBP. Based on it, the interactions between the main ions in the cement paste solution and the surface of CBP were discussed. Then the effect of CBP on the nucleation and growth of hydrates, and CBP/hydrates interfacial strength was investigated. The results show that CBP has similar surface properties as quartz powder (QP), even though the chemical compositions of them are different. Silicate is the main phase at the surface of CBP. The interactions of CBP’s surface with Ca2+ are due to an electrostatic force, which has an important effect on the nucleation and growth of hydrates (mainly C-S-H) on the surface of CBP, and the adhesion between CBP and the hydrates. The morphology of hydrates on the CBP particles is similar to that on the QP particles. It suggests that the effect of CBP particles on the early hydration of cement is mainly due to its physical properties, rather than the chemical activities. The interface between CBP and hydrates is very weak, and the chemical reaction of CBP in the cement paste is rarely presented. The main role of clay brick used in this study playing in cement paste is a filler, similar to quartz particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A review on emission analysis in cement industries10.1016/j.rser.2011.02.014 ↗
2. Options for achieving a 50% cut in industrial carbon emissions by 205010.1021/es902909k ↗
3. Mechanical properties and permeability of fiber-reinforced concrete with recycled aggregate made from waste clay brick10.1016/j.jclepro.2020.121690 ↗
4. Utilization of waste clay bricks as coarse and fine aggregates for the preparation of lightweight aggregate concrete10.1016/j.jclepro.2018.08.103 ↗
5. Potential use of brick waste as alternate concrete-making materials: a review10.1016/j.jclepro.2018.05.193 ↗
6. Research progress on recycled clay brick waste as an alternative to cement for sustainable construction materials10.1016/j.conbuildmat.2020.122113 ↗
7. Mix design of concrete with recycled clay-brick-powder using the orthogonal design method10.1016/j.conbuildmat.2012.01.002 ↗
8. Influence of ground waste clay brick on properties of fresh and hardened concrete10.1016/j.conbuildmat.2015.08.100 ↗
9. Y. Zhao, J. Gao, C. Liu, X. Chen, Z. Xu, The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement, Journal of Cleaner Production, 242 (2020) 118521.118521-118521.118510.10.1016/j.jclepro.2019.118521 ↗
10. Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D waste10.1016/j.cemconcomp.2020.103758 ↗
11. Reutilization of clay brick waste in mortar: paste replacement versus cement replacement10.1061/(ASCE)MT.1943-5533.0002794 ↗
12. Reutilizing clay brick dust as paste substitution to produce environment-friendly durable mortar10.1016/j.jclepro.2020.122787 ↗
13. Use of limestone sands and fillers in concrete without superplasticizer10.1016/j.cemconcomp.2012.02.010 ↗
14. Long-term effects of waste brick powder addition in the microstructure and service properties of mortars10.1016/j.conbuildmat.2018.06.161 ↗
15. Recycling waste brick from construction and demolition of buildings as pozzolanic materials10.1177/0734242X09358735 ↗
16. Malhotra · 1996
17. Mechanical Properties of Mortar with Recycled Clay-Brick-Powder
18. A. Standard, C305, Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency, Annual book of ASTM standards, 2006.
19. Insights into the mechanisms of nucleation and growth of C-S–H on fillers10.1617/s11527-017-1082-y ↗
20. W. Stumm, Chemistry of the Solid-Water Interface Processes at the Mineral-Water and Particle-Water Interface in Natural Systems, John Wiley & Son Inc., New York, 1992.
21. Adsorption of inorganics at solid-liquid interfaces10.1097/00010694-198204000-00010 ↗
22. Understanding the adhesion mechanisms between CSH and fillers10.1016/j.cemconres.2017.07.006 ↗
23. Combined experimental and numerical study of fracture behaviour of cement paste at the microlevel10.1016/j.cemconres.2015.03.008 ↗
24. Multi-scale interaction potentials (F − r) for describing fracture of brittle disordered materials like cement and concrete10.1007/s10704-007-9050-0 ↗
25. Experimental and numerical evaluation of mechanical properties of interface between filler and hydration products10.1016/j.conbuildmat.2017.01.022 ↗
26. Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties10.1016/j.cemconres.2015.09.018 ↗
27. The improvement of freezing–thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel10.1016/j.conbuildmat.2021.123274 ↗
28. Effect of C-S-Hs-PCE and sodium sulfate on the hydration kinetics and mechanical properties of cement paste10.1016/j.conbuildmat.2020.121096 ↗
29. Experimental investigation of calcium silicate hydrate (C-S-H) nucleation10.1016/S0022-0248(99)00051-2 ↗
30. Surface characterization of carbonated recycled concrete fines and its effect on the rheology, hydration and strength development of cement paste10.1016/j.cemconcomp.2020.103809 ↗
31. Early hydration of Portland cement with crystalline mineral additions10.1016/j.cemconres.2004.12.001 ↗
32. Why does concrete set?: The nature of cohesion forces in hardened cement-based materials10.1557/mrs2004.97 ↗
33. Nanoscale experimental investigation of particle interactions at the origin of the cohesion of cement10.1021/la050440+ ↗
34. Investigation by atomic force microscopy of forces at the origin of cement cohesion10.1016/S0304-3991(00)00091-7 ↗
35. Microscopic physical basis of the poromechanical behavior of cement-based materials10.1007/BF02481622 ↗
36. Controlling the cohesion of cement paste10.1021/la051048z ↗