journal article·2022-03Open access

Rheological, fresh, and mechanical properties of mechanochemically activated geopolymer grout: A comparative study with conventionally activated geopolymer grout

Mukhtar Hamid Abed, Israa Sabbar Abbas, Majid Hamed, Hanifi Canakci

Abstract

In this research, a mechanochemically activated geopolymer (MG) grout is adopted to activate slag, fly ash, sodium hydroxide, and sodium silicate by dry grinding in a ball mill for 2 h, after which water is the only additive required to initiate the geopolymerization reaction. A conventionally activated geopolymer (CG) grout was also evaluated for comparison purposes. Twenty-four different slag and fly ash mixtures have been prepared at different slag/fly ash ratios (0S100F, 50S50F, 75S25F, and 100S0F) at three different molarities of sodium hydroxide (1.25, 2.5, and 3.75) to assess the behavior of both MG grout and CG grout. A series of tests were examined, such as rheological characteristics, setting time, bleeding, unconfined compressive strength (UCS), ultrasonic pulse velocity (UPV), and scanning electron microscopy (SEM). The experimental results showed that the mechanochemical activation technique reduced the rheological characteristics and fresh properties (setting time and bleeding) of geopolymer grout compared to the conventional activation process. Considering mechanical properties, both UCS and UPV of MG grout were higher than that of CG grout. Furthermore, slag content and sodium hydroxide concentration significantly affected the rheological, fresh, and mechanical properties of all geopolymer grouts regardless of the activation method. Both the rheological characteristics and mechanical properties were increased considerably with the increase in molar concentration and slag content. Whereas the bleeding capacity and setting time dramatically reduced with the increase of molar concentration and slag content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. H. MR, Engineering Principles of Ground Modifications, (1990).
2. Warner · 2004
3. D.P. Coduto, Geotechnical engineering: principles and practices, 1999.
4. The role of particle technology in developing sustainable construction materials10.1016/j.apt.2009.10.006 ↗
5. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
6. Experimental investigation of using a recycled glass powder-based geopolymer to improve the mechanical behavior of clay soils10.1016/j.conbuildmat.2018.03.049 ↗
7. Stability of a new geopolymer grout: rheological and mechanical performances of metakaolin-fly ash binary mixtures10.1016/j.conbuildmat.2018.06.025 ↗
8. H. Güllü, A. Ali Agha, The rheological, fresh and strength effects of cold-bonded geopolymer made with metakaolin and slag for grouting, Constr. Build. Mater. 274 (2021) 122091. doi:10.1016/j.conbuildmat.2020.122091.10.1016/j.conbuildmat.2020.122091 ↗
9. Fabrication of thermal insulation geopolymer bricks using ferrosilicon slag and alumina waste
10. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
11. Effect of mix composition on compressive strength and microstructure of fly ash based geopolymer composites
12. Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete10.1016/j.conbuildmat.2015.10.026 ↗
13. Properties of geopolymer concrete produced by silica fume and ground-granulated blast-furnace slag
14. Effect of blast furnace slag grades on fly ash based geopolymer waste forms10.1016/j.fuel.2014.05.018 ↗
15. Strength, durability, and microstructure of geopolymers based on recycled-glass powder waste and dolomitic lime for soil stabilization10.1016/j.conbuildmat.2020.121874 ↗
16. Potential applications of geopolymer concrete in construction: a review
17. Effect of high temperatures on mechanical, radiation attenuation and microstructure properties of heavyweight geopolymer concrete
18. Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes10.1039/c3sm51889b ↗
19. Composition, strength and workability of alkali-activated metakaolin based mortars10.1016/j.conbuildmat.2011.04.017 ↗
20. Alkali-activated binders: A review. Part 2. About materials and binders manufacture10.1016/j.conbuildmat.2007.03.019 ↗
21. Rheology and setting of alkali-activated slag pastes and mortars: effect of organic admixture
22. A. Çevik, R. Alzeebaree, G. Humur, M. Eren, E ff ect of nano-silica on the chemical durability and mechanical performance of fl y ash based geopolymer concrete, 44 (2018) 12253–12264. doi:10.1016/j.ceramint.2018.04.009.10.1016/j.ceramint.2018.04.009 ↗
23. Behavior of geopolymer concrete deep beams containing waste aggregate of glass and limestone as a partial replacement of natural sand
24. Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete
25. W.K.W. Lee, J.S. J, Structural reorganisation of class F fly ash in alkaline silicate solutions, 211 (2002) 49–66.10.1016/S0927-7757(02)00237-6 ↗
26. Use of Infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates10.1021/la026127e ↗
27. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
28. Activating solution chemistry for geopolymers
29. An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash10.1016/j.cemconres.2007.01.013 ↗
30. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
31. Fly ash-based one-part alkali activated mortars cured at room temperature: effect of precursor pre-treatments
32. One-part geopolymers based on thermally treated red mud/NaOH blends10.1111/jace.13231 ↗
33. Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete10.1016/j.cemconcomp.2020.103899 ↗
34. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
35. Preparation, structure and hydrothermal stability of alternative (sodium silicate-free) geopolymers10.1007/s10853-007-1910-5 ↗
36. Effect of manufacturing process on the mechanisms and mechanical properties of fly ash-based geopolymer in ambient curing temperature10.1080/10426914.2016.1198013 ↗
37. Mix composition and characterisation of one-part geopolymers with different activators10.1016/j.conbuildmat.2019.07.083 ↗
38. Evolution of advanced geopolymeric cementitious material via a novel process10.1680/jadcr.16.00113 ↗
39. Mechanochemical activation of coal fly ash for production of high strength cement conglomerates
40. others, Hallmarks of mechanochemistry: from nanoparticles to technology10.1039/c3cs35468g ↗
41. Pozzolanic activity of mechanochemically and thermally activated kaolins in cement10.1016/j.cemconres.2015.04.017 ↗
42. Mechanical activation of fly ash: effect on reaction, structure and properties of resulting geopolymer10.1016/j.ceramint.2010.09.038 ↗
43. Control of geopolymer properties by grinding of land filled fly ash10.1016/j.minpro.2015.08.010 ↗
44. Geopolymerisation behaviour of size fractioned fly ash10.1016/j.apt.2014.09.001 ↗
45. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature10.1016/j.jmatprotec.2009.03.016 ↗
46. Improving reactivity of fly ash and properties of ensuing geopolymers through mechanical activation10.1016/j.conbuildmat.2014.01.095 ↗
47. Development and Characterization of Inorganic-Organic (Si-O-Al) Hybrid Geopolymeric Precursors via Solid State Method10.1007/s12633-018-9847-7 ↗
48. Potential of using industrial wastes for production of geopolymer binder as green construction materials10.1016/j.conbuildmat.2019.06.054 ↗
49. Formulation of mechanochemically evolved fly ash based hybrid inorganic–organic geopolymers with multilevel characterization10.1007/s10904-016-0461-0 ↗
50. Enhancing reactivity and properties of fl y-ash-based solid-form geopolymer via
51. Mechanochemically activated bottom ash-fly ash geopolymer10.1016/j.cemconcomp.2021.103976 ↗
52. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
53. Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers10.1016/j.colsurfa.2006.12.064 ↗
54. M. Komljenovic, Z. Miladinovic, V. Nikolic, Z. Zoran, Effects of the concentrated NH 4 NO 3 solution on mechanical properties and structure of the fly ash based geopolymers ˇ arevic, 41 (2013) 570–579. doi:10.1016/j.conbuildmat.2012.12.067.10.1016/j.conbuildmat.2012.12.067 ↗
55. Assessment of phase formation in alkali activated low and high calcium fly ashes in building materials10.1016/j.conbuildmat.2009.11.007 ↗
56. Fresh and hardened properties of fly ash-slag blended geopolymer paste and mortar10.1186/s40069-019-0360-1 ↗
57. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
58. Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends10.1016/j.ceramint.2014.09.075 ↗
59. Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties10.1016/j.cemconres.2020.106302 ↗
60. Rheology of alkali-activated materials: a review10.1016/j.cemconcomp.2021.104061 ↗
61. Shrinkage mitigation strategies in alkali-activated slag10.1016/j.cemconres.2017.08.025 ↗
62. Shrinkage mechanisms of alkali-activated slag10.1016/j.cemconres.2016.07.001 ↗
63. Shrinkage and strength development of alkali-activated fly ash-slag binary cements10.1016/j.conbuildmat.2017.06.040 ↗
64. Role of slag in microstructural development and hardening of fl y ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
65. Influence of iron making slags on strength and microstructure of fly ash geopolymer10.1016/j.conbuildmat.2012.09.070 ↗
66. Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers10.1016/j.conbuildmat.2013.09.048 ↗
67. Corrosion and fire protective behavior of advanced phosphatic geopolymeric coating on mild steel substrate10.1007/s12633-019-00153-1 ↗
68. Multinuclear MAS NMR Characterization of Fly-Ash-based advanced sodium aluminosilicate geopolymer: exploring solid-state reactions10.1002/slct.202000203 ↗
69. Enhancing reactivity and properties of fly-ash-based solid-form geopolymer via ball-milling, Emerg
70. M. Manish, C.R. Kumar, M. Deepti, F. Application, P. Data, (12) United States Patent, 2 (2016).
71. Standard test method for viscosity of chemical grouts by brookfield viscometer
72. On the rheology of using geopolymer for grouting: A comparative study with cement-based grout included fly ash and cold bonded fly ash10.1016/j.conbuildmat.2018.11.140 ↗
73. Rheological and strength performances of cold-bonded geopolymer made from limestone dust and bottom ash for grouting and deep mixing10.1007/s10064-020-01998-2 ↗
74. The effect of replacement rate and fineness of natural zeolite on the rheological properties of cement-based grouts10.1139/L08-039 ↗
75. Analytical models for estimating yield stress of high-performance pseudoplastic grout10.1016/S0008-8846(01)00476-8 ↗
76. Rheological properties of cementitious materials containing mineral admixtures10.1016/j.cemconres.2004.11.002 ↗
77. Flow box test for viscosity of soil in plastic and viscous liquid states10.1016/j.sandf.2012.12.002 ↗
78. A. Yahia, S. Mantellato, R.J. Flatt, Concrete rheology: a basis for understanding chemical admixtures, in: Sci. Technol. Concr. Admixtures, Elsevier, 2016: pp. 97–127.10.1016/B978-0-08-100693-1.00007-2 ↗
79. Comparison of rheological models for jet grout cement mixtures with various stabilizers10.1016/j.conbuildmat.2016.09.129 ↗
80. Extension of the Reiner-Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers10.1617/s11527-012-9902-6 ↗
81. Rheology of fly ash-based geopolymer: effect of NaOH concentration10.1016/j.conbuildmat.2019.07.028 ↗
82. American Society for Testing & Mater, Standard test methods for felt, (1987) 1–8. doi:10.1520/C0191-19.2.
83. ASTM:C940-10a, Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory, ASTM Int. i (2010) 1–3. doi:10.1520/C0940-16.2.
84. Examination of the mechanical properties and failure pattern of soilcrete mixtures modified with rice husk ash10.1080/19648189.2018.1458656 ↗
85. C.C. Test, C. Ag-, A. Concrete, P. Concrete, StandardTest Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory 1, (2021) 10–12.
86. D. Dimensional, S. Tolerances, Standard Test Method for Unconfined Compressive Strength of Intact Rock Core, 03 (2021) 14–16.
87. C. ASTM, Standard test method for pulse velocity through concrete, ASTM Int. West Conshohocken, PA. (2009).
88. Classification of rocks and soils for engineering geological mapping. Part 1: rock and soil materials
89. Utilization of induction furnace steel slag based iron oxide nanocomposites for antibacterial studies, SN
90. W. Sottisopha, S. Asavapisit, Immobilization of the Plating Sludge by Activation of Pulverized Fuel Ash with Sodium Silicate Solution, 10 (2005).
91. Electrical conductivity of concentrated aqueous mixtures of HCl and KCl in a wide range of compositions and temperatures10.1021/je990160u ↗
92. The impact of the amount of water used in activation solution and the initial temperature of paste on the rheological behaviour and structural evolution of metakaolin-based geopolymer pastes
93. The viscosity properties of sodium silicate solutions10.1007/s10953-007-9214-6 ↗
94. Early stage dissolution characteristics of aluminosilicate glasses with blast furnace slag- and fly-ash-like compositions10.1111/jace.14716 ↗
95. J. Zhang, S. Li, Z. Li, Q. Zhang, H. Li, J. Du, Y. Qi, Properties of fresh and hardened geopolymer-based grouts, Ceram. - Silikaty. 63 (2019) 164–173. doi:10.13168/cs.2019.0008.10.13168/cs.2019.0008 ↗
96. Experimental study of the viscosity of suspensions: effect of solid fraction, particle size and suspending liquid10.1016/j.powtec.2014.05.044 ↗
97. Why is fresh self-compacting concrete shear thickening?10.1016/j.cemconres.2009.03.004 ↗
98. D. Feys, R. Verhoeven, G. De Schutter, The paradox of self-compacting concrete: why does it require more energy during pumping?, in: 3rd Int. Symp. Non-Traditional Cem. Concr., 2008: pp. 228–236.
99. D. Feys, R. Verhoeven, G. De Schutter, Full scale pumping tests on SCC: test description and results, in: 3rd North Am. Conf. Des. Use Self-Consolidating Concr. Challenges Barriers to Appl. (SCC 2008), 2009: pp. 631–636.
100. Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes10.1016/j.cemconres.2018.04.008 ↗