journal article·2013-08

The effect of cement type and plasticizer addition on concrete properties

Dzigita Nagrockiene, Ina Pundienė, Asta Kicaite

Publisher page

Abstract

It is important to select a certain type and amount of plasticizer for successful cement application in concrete. In the paper, the dynamic viscosity test was adopted to verify the impact of the type and dosage of plasticizers lignosulphonates (LS), polycarboxilate acid (P) and polycarboxylate ester (SP) on limestone cement (L) and normal cement (N) paste viscosity. The results show that the SP addition most efficiently reduces viscosity in the pastes of both types of cement, P addition moderately and the LS addition increases viscosity. It has been estimated that the increase of SP content further extends the hydration process in a concrete mixture with N, than in a mixture with L. Examination of the physical–mechanical properties of hardened concrete using both types of cement show that in order to get satisfactory properties of concrete using L cement, the application of a higher amount of SP is recommended. For concrete with N cement a high amount of SP is undesirable, because it slows down the hydration process of cement and concrete properties are significantly deteriorated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Influence of mortar rendering on chloride penetration into concrete structures10.1016/j.cemconcomp.2010.11.003 ↗
2. Properties of blended cements with limestone filler and fly ash content
3. Simultaneous influences of microsilica and limestone Po on properties of portland cement paste
4. Limestone filler cement in low W/C concrete: a rational use of energy10.1016/S0008-8846(02)01087-6 ↗
5. Why some carbonate filler cause rapid increases of viscosity in dispersed cement-based materials10.1016/S0008-8846(00)00353-7 ↗
6. An analysis of properties of Portland limestone cements and concrete10.1016/S0958-9465(01)00089-0 ↗
7. Effect of limestone filler content and superplasticizer dosage on rheologigal parameters of highly flowable mortar under light pressure conditions10.1016/j.cemconres.2009.10.013 ↗
8. Portland-limestone cements. Their properties and hydration compared to those of other composite cements10.1016/j.cemconcomp.2004.02.006 ↗
9. Influence of superplasticizers on rheological behaviour of fresh cement mortars10.1016/j.cemconres.2003.07.002 ↗
10. Compatibility between superplasticizer admixtures and cements with mineral additions10.1016/j.conbuildmat.2011.12.092 ↗
11. Mechanism for salt scaling10.1111/j.1551-2916.2006.00913.x ↗
12. Experimental and numerical modeling of chloride penetration and calcium dissolution in saturated concrete10.1016/j.cemconres.2007.08.027 ↗
13. On the relationship between pore structure and chloride diffusivity from accelerated chloride migration test in cement-based materials10.1016/j.cemconres.2006.03.007 ↗
14. Chloride ingress in cement paste and mortar10.1016/S0008-8846(99)00131-3 ↗
15. Compatibility of superplasticizers with different cements10.1016/S0950-0618(00)00025-8 ↗
16. Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts10.1016/j.cemconcomp.2009.01.005 ↗
17. LST EN 197–1: 2011. Cement – Part 1: Composition, specifications and conformity criteria for common cements. Lithuanian Standard Board. 2011; 38p.
18. LST EN 12620:2003+A1:2008. Aggregates for concrete. Lithuanian Standard Board. 2009; 49p.
19. LST EN 1008:2005. Mixing water for concrete – specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete. Lithuanian Standard Board. 2005; 17p.
20. LST EN 206–1:2002. Concrete – Part 1: specification, performance, production and conformity. Lithuanian Standard Board. 2002; 68p.
21. LST EN 12390–2:2009. Testing hardened concrete – Part 2: making and curing specimens for strength tests. Lithuanian Standard Board. 2009; 6p.
22. LST EN 12390–3:2009. Testing hardened concrete - Part 3: compressive strength of test specimens. Lithuanian Standard Board. 2009; 18p.
23. LST EN 12390–7:2009. Testing hardened concrete – Part 7: density of hardened concrete. Lithuanian Standard Board. 2009; 10p.
24. Mačiulaitis R. Frost resistance and durability of façade bricks. Frostwiderstand und Dauerhaftigkeit keramischer Fassadenerzeugnisse. Vilnius: Technika. 1996; 132p.
25. LST EN 12504–4:2004. Testing concrete - Part 4: Determination of ultrasonic pulse velocity Lithuanian Standard Board. 2004; 14 p.
26. Alcoa calcium aluminate cement test methods brochure, Revision 5, 08/99, available through Alcoa Industrial Chemicals, Frankfurt.
27. Navickas A; Skripkiūnas G, Gečys R. Medžiagotyros ir statybinių medžiagų laboratoriniai darbai. 2003. Kaunas: Technologija, 109 p.
28. LST EN 12350–2:2009. Testing fresh concrete - Part 2: slump-test. Lithuanian Standard Board. 2009; 7p.
29. LST EN 206–1. Concrete - Part 1: specification, performance, production and conformity. Lithuanian Standard Board. 2002; 68p.
30. Investigation of the hydration process in 3CaO·Al2O3–CaSO4⋅2H2O-plasticizer – H2O systems by X-ray diffraction
31. Effect of concrete mixing parameters on propagation of ultrasonic waves10.1016/j.conbuildmat.2004.07.022 ↗
32. Determination of initial degree of hydration for improvement of early-age properties of concrete using ultrasonic wave propagation10.1016/j.cemconcomp.2006.02.007 ↗