Construction of triaxial dynamic modulus master curve for asphalt mixtures
Source abstract
Abstract
Abstract The dynamic modulus is considered as the most important factor of asphalt concrete influencing the field performance of asphalt pavements. The newly developed Mechanistic-Empirical Pavement Design Guide (MEPDG) used the uniaxial dynamic modulus master curve to characterize the temperature and time dependent behavior of asphalt concrete. It is evident that the triaxial dynamic modulus can better characterize the in situ mechanical behavior of the material. This study proposed a model for the construction of triaxial dynamic modulus master curve. A key feature of the proposed model is that it employs the vertical shifting technique to take into account the effect of confining pressure on the dynamic modulus. The vertical shift factor is modeled as a function of the reduced frequency and confining pressure. The triaxial master curve model was evaluated using dynamic modulus test results of three asphalt mixtures obtained at various temperatures, loading frequencies and confining pressures. The predictive accuracy of the proposed model is about the same as that of uniaxial and isobaric master curves, indicating the proposed model is accurate and effective in constructing triaxial dynamic modulus master curves.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Applied research associates (ARA). Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Final report, national cooperative highway research program (NCHRP) Project 1–37A, New Mexico: Albuquerque; 2004.
2. Witczak MW, Kaloush K, Pellinen T, El-Basyouny M, Von Quintus H. Simple performance test for superpave mix design, NCHRP report 465, transportation research board, National Research Council, Washington, DC; 2002.
3. Zeiada W, Kaloush K, Biligiri K, Reed J, Stempihar J. Significance of confined dynamic modulus laboratory testing for asphalt concrete: conventional, gap-graded, and open-graded mixtures, Transportation research record no. 2210, National Research Council, Washington, DC; 2011. pp. 9–19.10.3141/2210-02 ↗
4. Kim Y, Guddati M, Underwood B, Yun T, Savadatti V. Development of a multiaxial viscoelastoplastic continuum damage model for asphalt mixtures, FHWA publication no. DTFH61-05-H-00019; Federal Highway Administration, McLean, VA; 2009.
5. Experimental investigations of the viscoelastic and damage behaviors of hot-mix asphalt in compression10.1061/(ASCE)MT.1943-5533.0000197 ↗
6. Developing master curves and predicting dynamic modulus of polymer-modified asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000145 ↗
7. Ferry · 1980
8. Stress dependent master curve construction for dynamic (complex) modulus
9. Witczak MW, Uzan J. The universal airport pavement design system – report i of iv: granular material characterization. Department of Civil Engineering, University of Maryland at College Park, MD; 1988.
10. Zhao Y, Bai Q. Performance evaluation of pavement structures with asphalt treated bases used in huning expressway, Jiangsu DOT report no. 04Y50; Nanjing, China; 2007.
11. American association of state highway and transportation officials (AASHTO). Standard method of test for determining dynamic modulus of hot-mix asphalt (HMA). AASHTO TP 62–07, Washington, DC; 2007.
12. Asphalt mixture stiffness predictive models
13. Physical properties of asphalt cement and the development of performance related specifications
14. Long-term prediction of creep in textile fibers10.1016/0032-3861(94)90256-9 ↗
15. Nonlinear creep behavior of viscoelastic polycarbonate10.1007/s10853-005-2276-1 ↗
16. Pressure–temperature–viscosity relationship for heavy petroleum fractions10.1016/j.fuel.2006.05.006 ↗
17. Evaluation of time dependent behavior of a wood flour/high density polyethylene composite10.1177/0731684408096427 ↗
18. Time–temperature superposition for polymeric blends
19. Time–temperature superposition – a users guide
20. Plazek · Temperature dependence of the steady state recoverable compliance of amorphous polymers · 1977 · 18 · 15
21. On the characterization of non-linear viscoelastic materials10.1002/pen.760090410 ↗
22. Nonlinear viscoelastic analysis of unaged and aged asphalt binders10.1016/j.conbuildmat.2007.08.012 ↗
23. Hirsch model for estimating the modulus of asphalt concrete
24. Bonaquist R. Refining the simple performance tester for use in routine practice, NCHRP report 614, Transportation Research Board, Washington, DC; 2008.10.17226/14158 ↗