journal article·2014-08

Freezing–thawing effects on electromagnetic wave reflectivity of carbon fiber cement based composites

Zhen-jun Wang, Ke-zhi Li, Chuang Wang

Publisher page

Abstract

Abstract Electromagnetic pollution has increasingly attracted attention with the development of electronic technology. Carbon fiber cement based composites are widely used as electromagnetic wave absorbing material. However, freezing–thawing cycles can affect their wave absorbing function. In this paper, specimens of the composites with different carbon fiber (CF) contents were prepared. The reflectivity variation of the composites against the wave was investigated before and after 50 freezing–thawing cycles by Naval Research Laboratory (NRL) testing system in 2.0–18.0 GHz frequency bands. The microstructure and the pore size distribution were analyzed by Scanning Electron Microscopy (SEM) and a pore distribution analyzer. Results show that the reflectivity varies slightly before and after freezing–thawing without any CF. In the lower frequency bands, the reflectivity of the composites with different CF contents increases obviously after freezing–thawing cycles. In the higher frequencies, it decreases first and increases then with the minimum value of −12.5 dB and 2.5 GHz frequency band. When the CF content is higher than 0.2%, freezing–thawing cycles can decrease the wave absorbing property of the composites. The porosity of the composites decreases with the increase of the CF contents. It rises when the CF content is 0.8 wt.%. Lower porosity is beneficial to improve the electromagnetic wave absorbing property for the composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Smart Materials for Construction · Advanced Energy Technologies and Civil Engineering Innovations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Reflectivity of carbon-fiber-reinforced cement-based composites against electromagnetic waves
2. Electromagnetic interference shielding effectiveness of carbon materials10.1016/S0008-6223(00)00184-6 ↗
3. Effect of chemical vapor deposition treatment of carbon fibers on the reflectivity of carbon fiber-reinforced cement-based composites10.1016/j.compscitech.2007.08.003 ↗
4. The effects of temperature and frequency on the dielectric properties, electromagnetic interference shielding and microwave-absorption of short carbon fiber/silica composites10.1016/j.carbon.2009.10.028 ↗
5. Investigation of electromagnetic wave absorber based on carbon fiber reinforced aerated concrete using time-domain method10.12693/APhysPolA.113.1047 ↗
6. The use of carbon/dielectric fiber woven fabrics as filters for electromagnetic radiation10.1016/j.carbon.2009.02.013 ↗
7. Smart behavior of carbon fiber reinforced cement-based composite
8. Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing10.1016/j.carbon.2012.01.031 ↗
9. Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites10.1016/j.matdes.2013.05.010 ↗
10. Laboratory evaluation of tensile strength and energy absorbing properties of cement mortar reinforced with micro-and meso-sized carbon fibers10.1016/j.conbuildmat.2013.03.071 ↗
11. Effects of strength, permeability, and air void parameters on freezing–thawing resistance of concrete with and without air entrainment10.1520/JAI102454 ↗
12. Durability evaluation of carbon fiber-reinforced polymer strengthened concrete beams: experimental study and design
13. Deterioration of concrete freezing–thawing in different salts solution10.4028/www.scientific.net/KEM.405-406.315 ↗
14. Square concrete columns strengthened with carbon fiber reinforced plastics sheets at low temperatures10.1007/s11771-009-0138-8 ↗
15. Freeze–thaw damage and chemical change of a Portland cement concrete in the presence of diluted deicers10.1617/s11527-009-9557-0 ↗
16. Conductive concrete overlay for bridge deck deicing: mixture proportioning, optimization, and properties
17. Electromagnetic wave absorbing characteristics of carbon black cement-based composites10.1016/j.cemconcomp.2010.03.009 ↗
18. Investigation of the electromagnetic characteristics of cement based composites filled with EPS10.1016/j.cemconcomp.2006.08.001 ↗
19. Freeze–thaw durability of lightweight carbon fiber reinforced cement composites
20. Electrical resistivity, pulse velocity, and compressive properties of carbon fiber-reinforced cement mortar10.1061/(ASCE)0899-1561(2008)20:2(93) ↗
21. Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites10.1016/j.msea.2007.09.073 ↗
22. Percolation backbone structure analysis in electrically conductive carbon fiber reinforced cement composites10.1016/j.compositesb.2012.02.032 ↗
23. Temperature and mixing effects on electrical resistivity of carbon fiber enhanced concrete10.1088/0964-1726/22/3/035021 ↗
24. The relationship between an aggregate’s pore size distribution and its freeze thaw durability in concrete10.1016/0008-8846(80)90119-2 ↗
25. Influence of porosity on the electromagnetic shielding properties of 3D C/C composites
26. Predicting the volume instability of hydrated cement systems upon freezing using poro-mechanics and local phase equilibria10.1617/14165 ↗
27. Volume fraction effects in ultra-lightweight composite materials for EMI shielding
28. Effect of chemical vapor infiltration treatment on the wave-absorbing performance of carbon fiber/cement composites10.1016/S1005-8850(08)60292-3 ↗