journal article·2007-06

Durability performance of RC beams strengthened with epoxy injection and CFRP fabrics

Mahmut Ekenel, John J. Myers

Publisher page

Abstract

Abstract Cracks in reinforced concrete (RC) should be repaired if they present the potential for durability related problems such as corrosion of reinforcing steel. One way to repair extensive cracks is the use of epoxy injection. Another repair technique to enhance shear or flexural strength in deficient RC members is the utilization of externally bonded carbon fiber reinforced polymer (CFRP) fabrics. The effect of environmental conditioning on crack injection with or without CFRP strengthening is of interest in this investigation. Test results showed that the crack injection provided an increase in initial stiffness for un-strengthened RC beams. An increase in initial stiffness and ultimate strength was achieved in CFRP strengthened RC beams. Surface roughness combined with crack injection significantly increased the flexural capacity of the specimens. Environmental conditioning significantly affected the bond performance of the epoxy injection. The presence of sustained load during environmental conditioning resulted in reduced section capacity and ductility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. ACI Committee 224R-80 · 1980
2. ACI Committee 224.1R-93 · 1993
3. ACI Committee 318-05 · 2005
4. ACI Committee 440.2R-02 · 2002
5. ACI Committee 546R-96 · 1996
6. ASTM A370. Standard test methods and definitions for mechanical testing of steel products. 2002; vol. 04-02, Philadelphia, PA.
7. ASTM C 39. Standard test method for compressive strength of cylindrical concrete specimens. 2001; vol. 04-02, Philadelphia, PA.
8. ASTM C 469. Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. 1994; vol. 04-02, Philadelphia, PA.
9. Calder A.J.J., Thompson DM. Repair of cracked reinforced concrete: assessment of corrosion protection. Transport and Road Research Laboratory, Department of Transport, Research Report 150, 1998.
10. Experimental investigation of seismic repair and retrofit of bridge columns by composite jackets10.1177/0731684403035573 ↗
11. Macgregor · 1997
12. Evaluation of bond properties in concrete repair materials10.1061/(ASCE)0899-1561(2001)13:2(98) ↗
13. Reed CE, Peterman RJ, Rasheed H, and Meggers D. Adhesive applications used during the repair and strengthening of 30-year-old Prestressed concrete girders (input to TRB). Transportation Research Board Annual Meeting CD-ROM, 2003.10.3141/1827-05 ↗
14. Shen X., Myers J.J., Maerz N., and Galecki G. Effect of roughness on the bond performance between FRP laminates and concrete. Proceedings of CDCC, 2002, Montreal.
15. Tsiatas, G., Robinson, J., Durability evaluation of concrete crack repair systems. Transportation Research Record 1795, 1994, Paper No 02-3596, p. 82–7.10.3141/1795-11 ↗