journal article·2013-12Open access

Strength and transport properties of steam cured and water cured lightweight aggregate concretes

Mehmet Gesoğlu, Erhan Güneyisi, Barham Ali, Kasım Mermerdaş

Abstract

Abstract In this paper, effect of steam and water curing on the compressive strength development and transport properties such as water sorptivity, rapid chloride ion permeability, and gas permeability of concretes containing various volumes of lightweight fly ash aggregate (LWA) were investigated. In production of concrete, a fixed amount of lightweight coarse (LWCA) aggregate plus varying amounts of lightweight fine aggregate (LWFA) were used. Utilization of LWFA was achieved by volumetric substitution of fine aggregate with five different replacement levels namely, 0%, 25%, 50%, 75%, and 100%. Therefore, five different concrete mixtures were produced for this experimental study. The produced concretes were divided into two parts one of which was initially steam cured while the other was directly exposed to water curing. After initial steam curing regime, the steam cured (SC) concretes were also transferred to water until testing Mechanical properties of concretes were monitored through compressive strength development over 56 days, while transport properties were measured by means of water sorptivity, gas permeability and rapid chloride permeability tests conducted at 28 and 56 days.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash10.1016/j.resconrec.2004.12.006 ↗
2. Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash10.1016/j.resconrec.2004.05.004 ↗
3. Sintering of MSW fly ash for reuse as a concrete aggregate10.1016/S0304-3894(01)00286-2 ↗
4. The thermo treatment of msw incinerator fly ash for use as an aggregate: a study of the characteristics of size fractioning10.1016/S0921-3449(01)00121-5 ↗
5. Influence of binders on properties of sintered fly ash aggregate10.1016/j.cemconcomp.2005.06.005 ↗
6. Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete10.1016/j.jhazmat.2012.08.013 ↗
7. Utilization of fly ash engineering pellet aggregates10.1007/s00254-006-0248-7 ↗
8. Gesoğlu M. Effects of lightweight aggregate properties on mechanical, fracture, and physical behavior of lightweight concretes. PhD thesis, Boğaziçi University, İstanbul; 2004.
9. Techno-commercial perspective study for sintered fly ash light-weight aggregates in India10.1016/S0950-0618(98)00022-1 ↗
10. Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash10.1016/j.resconrec.2004.12.006 ↗
11. Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete10.1016/j.conbuildmat.2008.09.018 ↗
12. Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag10.1617/s11527-012-9855-9 ↗
13. Effect of lightweight fly ash aggregate microstructure on the strength of concretes10.1016/S0008-8846(97)00019-7 ↗
14. Techno-commercial perspective study for sintered fly ash light-weight aggregates in India10.1016/S0950-0618(98)00022-1 ↗
15. Effect of initial curing on early strength and physical properties of a lightweight concrete10.1016/S0008-8846(98)00051-9 ↗
16. Strength and durability of lightweight and normal weight concrete10.1061/(ASCE)0899-1561(1999)11:3(231) ↗
17. Yun B, Ratiyah I, Basheer PAM. Properties of lightweight concrete manufactured with fly ash, furnace bottom ash and Lytag. In: International workshop on sustainable development and concrete technology. Beijing, 2004. p. 77–88.
18. Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash10.1016/S0008-8846(99)00179-9 ↗
19. Some characteristics of high strength fiber reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
20. Crack growth mechanisms in four different concretes: microscopic observations and fractal analysis10.1016/S0008-8846(97)00221-4 ↗
21. Effect of curing and heat treatment history on the dynamic mechanical response and the pore structure of hardened cement paste10.1016/0008-8846(73)90057-4 ↗
22. Taylor · 1997
23. Concrete durability
24. Strength impairment of concrete mixed in hot weather: relation to porosity of bulk fresh concrete paste and maturity10.1680/macr.2003.55.3.215 ↗
25. Verbeck GJ, Helmuth RH. Structures and physical properties of cement pastes. In: The cement association of Japan (ed.), Proceedings of the 5th international symposium on the chemistry of cement, Tokyo, 1968. p. 1–32.
26. Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials10.1016/j.cemconres.2004.05.044 ↗
27. Some factors affecting early compressive strength of steam-curing concrete with ultrafine fly ash10.1016/S0008-8846(01)00559-2 ↗
28. Curing techniques and their effectiveness
29. Ho DWS. How well concrete be cured. In: Proceeding of fourth CANMET/ACI international conference on advances in concrete technology, Tokushima; 1998. p. 141–151.
30. Steam-cured concrete incorporating mineral admixtures10.1016/S0008-8846(02)01028-1 ↗
31. Ho DWS, Cao T. Water sorptivity of steam cured concrete. In: CIA (NSW) seminar on the structural use of precast concrete. Concrete Institute of Australia; 1994. 10 pages.
32. Ho DWS, Chirgwin GJ, Mak SL. Water sorptivity of heat-cured concrete for bridge structures. In: Proceedings of third CANMET/ACI international conference on advances in concrete technology, Auckland; 1997. p. 97–108.
33. ASTM D2216-10, Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass; 2010.
34. ASTM C1202, Test method for electrical indication of concrete’s ability to resist chloride ion penetration. Annual Book of ASTM Standards, American Society for Testing and Materials, V. 4.02; 2006.
35. Permeability of concrete as a criterion of its durability
36. Effect of steam curing on class C high-volume fly ash concrete mixtures10.1016/j.cemconres.2004.08.011 ↗
37. Neville · 1997
38. ACI-213R Guide for Structural Lightweight (Reapproved 1999) Aggregate Concrete.
39. Characteristics of lightweight concrete containing mineral admixtures10.1016/j.conbuildmat.2010.07.025 ↗
40. Optimum heat treatment cycle for cements of different type and composition10.1016/S0008-8846(98)00134-3 ↗
41. Influence of heat curing on the pore structure and compressive strength of self-compacting concrete (SCC)10.1016/j.cemconres.2005.12.004 ↗
42. Gas permeability and capillary porosity of self-compacting concrete10.1617/s11527-007-9326-x ↗
43. Improving strength, drying shrinkage, and pore structure of concrete using metakaolin10.1617/s11527-007-9296-z ↗
44. Comparative study on strength, sorptivity, and chloride ingress characteristics of air-cured and water-cured concretes modified with metakaolin10.1617/s11527-007-9258-5 ↗