journal article·2015-06

Influence of foaming water content on foam asphalt mixtures

Biruk W. Hailesilassie, Martin Hugener, Manfred N. Partl

Publisher page

Abstract

Warm mix asphalt technology using foamed bitumen is being used widely despite the fact that high air void content and poor coating of large aggregate remain major drawbacks require enhancement. This paper manly focuses on the investigation of water content influence on the foamed bitumen and the asphalt mixture. Influence of the water content in combination with compaction temperature has been investigated using gyratory compaction method. AC11N foam asphalt mixture is produced in the lab using lab foamer. Marshall stability and indirect tensile test was used to evaluate the foam asphalt mixture performance. The investigation revealed that the Marshall stability of foam asphalt mixture is highly influenced by compaction temperature compared to water content. Moreover, increasing the water content helps in coating large aggregates when the mixture is produced at low temperature, nevertheless using high water content reduces the Marshall stability to certain extent. In addition the amount of water trapped in the mixture after the mixing process was determined using thermogravimetric analysis. The amount of water remaining in the asphalt mixture is less than 1% relative to the bitumen mass.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Walt Nvd, Botha P, Semmelink C, Engelbrecht F, Salminen N. The use of foamed bitumen in full-depth in-place recycling of pavement layers illustrating the basic concept of water saturation in the foam process. In: Presented at the 7th conference on asphalt pavements for southern Africa; 1999.
2. Collings DC, Jenkins KJ. Key characteristics of materials stabilised with foamed bitumen, Advanced testing and characterization of bituminous materials, vol. 2; 2009.10.1201/9780203092989.ch112 ↗
3. Jenkins KJ, de Groot JLA, van de Ven MFC, Molenaar A. Half-warm foamed bitumen treatment, a new process. In: 7th conference on asphalt pavements for southern Africa; 1999.
4. Development of (half-) warm foamed bitumen mixes: state of the art10.1080/10298430601149635 ↗
5. Voskuilen JLM, Mangnus S, van de Ven MFC, van Wieringen JBM, Bolk HJNA. Experiences with half-warm foamed bitumen treatment process in the Netherlands. In: Presented at the Conference on Asphalt Pavements for Southern Africa (CAPSA’04) Sun City, South Africa; 2004.
6. Button · 2007
7. Button · 2008
8. Olard F, Héritier B, Beduneau E. Low energy asphalt LEA®: new half-warm mix asphalt for minimizing impacts from asphalt plant to job site. In: Presented at the ISAP 2008; 2008.
9. Jenkins KJ. Mix design considerations for cold and half-warm bituminous mixes with emphasis on foamed bitumen. Doctor of Philosophy Department of Civil Engineering, University of Stellenbosch South Africa; 2000.
10. Novel testing procedure for assessment of quality of foamed warm mix asphalt binders
11. Sri Sunarjono. The influence of foamed bitumen characteristics of cold-mix asphalt properties. Doctor of Philosophy, Nottingham Transportation Engineering Centre, The University of Nottingham, School of Civil Engineering; 2008.
12. Saleh · 2006
13. Wirtgen · 2005
14. Muthen KM, Lewis A, Vos RM. Foamed asphalt mixes, mix design procedure. In: Presented at the 7th conference on asphalt pavements for southern Africa. South Africa; 1999.
15. Milton · 1999
16. Chiu CT, Huang MY. A study on properties of foamed asphalt treated mixes. University, Department of Civil Engineering, Tung Shiang, Hsin Chu, 300 Taiwan; 2002.
17. Leek C, Jameson G. Review of foamed bitumen stabilisation mix design methods. Austroads, Sydney NSW 2000 Australia; 2011.
18. 2009
19. Ramanujam J, Jones J, Janosevic M, Design, construction and performance of insitu foamed bitumen stabilized pavements. Queensland Roads; 2009.
20. Airey GD, Choi YK, Collop AC, Moore AJV, Elliott RC. Combined laboratory ageing/moisture sensitivity assessment of high modulus base asphalt mixtures. In: Presented at the AAPT 2005. Hyatt Regency, Long Beach, California; 2005.
21. Terrel · 1994
22. Harrigan ET. Special Mixture Design Considerations and Methods for Warm Mix Asphalt: A Supplement to NCHRP Report 673: A Manual for Design of Hot Mix Asphalt with Commentary, vol. NCHRP REPORT 714, Hilary Freer, editor. Washington, D.C.: Transportation Research Board; 2012.
23. Hurley · 2006
24. 2008
25. Muthen · 1999
26. Tatić U, Ipavec A, Kalman B, Palković B, Strineka A, Marukić I, Schlosser F, Nemec B, Šrámek J, Mirski K. Practical mix design model for asphalt mixture; Sustainable Pavements for European New Member States; 2006.
27. Akeroyd FML, Hicks BJ. Foamed bitumen road recycling; 1988.
28. 2012
29. 2003
30. 2012
31. 2007
32. Shamsi KA, Mohammad L, Wu Z, Cooper S, Abadie C. Compactability and performance of superpave mixtures with aggregate structures designed using the bailey method. In: Presented at the association of asphalt paving technologists. Savannah, Georgia; 2006.
33. Christensen · 2000
34. Pellinen TK, Xiao S. Development of Hot-Mix Asphalt Performance Criteria for Indiana. In: Presented at the association of asphalt paving technologists. Savannah, Georgia; 2006.10.5703/1288284313390 ↗
35. 2003
36. Fu P, Jones D, Harvey JT, Halles F. An investigation of the curing mechanism of foamed asphalt mixes based on micromechanics principles, TRB; 2009.10.1061/(ASCE)MT.1943-5533.0000009 ↗
37. Long FM, Ventura DGC. Laboratory Testing for the HVS Sections on the N7 (TR11/1); 2004.
38. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives10.1016/j.conbuildmat.2012.07.074 ↗
39. A review and evaluation of specific heat capacities of rocks, minerals, and subsurface fluids. Part 1: minerals and nonporous rocks10.1023/B:NARR.0000032647.41046.e7 ↗
40. Kukkonen I, Lindberg A. Thermal properties of rocks at the investigation sites: measured and calculated thermal conductivity, specific heat capacity and thermal diffusivity, POSIVA OY, Mikonkatu 15 A, FIN-001 00 HELSINKI, FINLAND; 1998.
41. Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry10.1016/j.jclepro.2010.08.002 ↗
42. Hailesilassie BW, Schuetz P, Jerjen I, Bieder A, Hugener M, Partl MN. Evolution of bubble size distribution during foam bitumen formation and decay. In: Presented at the ISAP 2014 Conference; 2014.10.1201/b17219-150 ↗
43. McLaughlin · 1983
44. Larsen OR, Moen Ø, Robertus C, Koenders BG. Wam foam aspalt production at lower operating temperatures as an environmental friendly alternative to HMA. In: Presented at the 3rd Eurasphalt & Eurobitume Congress Vienna; 2004.
45. A study on the pyrolysis of asphalt10.1016/S0016-2361(02)00136-9 ↗