journal article·2014-11

Effects of magnesium on the microstructure and corrosion resistance of Zn–55Al–1.6Si coating

Shiwei Li, Bo Gao, Ganfeng Tu, Liang Hu, Shuchen Sun, Guanglin Zhu, Shaohua Yin

Publisher page

Abstract

Abstract In this paper, the effects of Mg addition (0, 0.5, 1.5 and 2.5 wt.%) on the microstructure and corrosion resistance of Galvalume coating (Zn–55Al–1.6Si) have been studied. The coating surface microstructure and the corrosion product morphology were investigated, and phase compositions of the different coatings and the corrosion products were analyzed. The corrosion resistance of Galvalume coatings alloyed with different contents of Mg was assessed by means of neutral salt spray test (NSS) and electrochemical impedance spectroscopy (EIS). The results showed that a new intermetallic phases (MgZn 2 ) appears in the zinc-rich interdendritic area of the Mg-containing Galvalume coating, improving the corrosion resistance of the zinc-rich interdendritic area. During the neutral salt spray test, serious localized corrosion occurs in the zinc-rich interdendritic area of the Galvalume coating, while the corrosion type of Zn–55Al–1.6Si–1.5Mg coating can be considered as uniform corrosion. The addition of Mg improves the compactness and stability of the corrosion product, and that of Galvalume coating consists of an incomplete outer layer and a defective inner layer. By contrast, the corrosion product formed on Zn–55Al–1.6Si–1.5Mg coating displays densely packed microstructure, showing the best barrier protection characteristics. The corrosion rate data and the EIS-Nyquist plots indicate that Mg can improve the corrosion resistance of Galvalume coating, and the Zn–55Al–1.6Si–1.5Mg coating shows the best corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Corrosion mechanism of model zinc–magnesium alloys in atmospheric conditions10.1016/j.corsci.2008.06.008 ↗
2. Corrosion of basaltic pumice, colemanite, barite and blast furnace slag coated rebars in concretes10.1016/j.conbuildmat.2012.07.030 ↗
3. The use of pumice as a coating for the reinforcement of steel against corrosion and concrete abrasions10.1016/j.corsci.2008.03.018 ↗
4. Bond strength of hot-dip galvanized reinforcement in normal strength concrete structures10.1016/j.conbuildmat.2004.07.008 ↗
5. Bond strength of hot-dip galvanized hooked bars in high strength concrete structures10.1016/j.conbuildmat.2007.07.028 ↗
6. Effect of de-icing salts on the corrosion performance of galvanized steel in sulphate contaminated soil10.1016/j.conbuildmat.2012.09.077 ↗
7. Borzillo AR, Crowley JE, Horton JB. Non-ferrous metal coated products and method of production thereof. Bethlehem Steel Corporation, Patent CA899729, 1972.
8. Development of a new organic composite coating for enhancing corrosion resistance of 55% Al–Zn alloy coated steel sheet10.1016/S0257-8972(03)00110-5 ↗
9. The role of Si and Ti additions on the formation of the alloy layer at the interface of hot-dip Al–Zn coatings on steel strips10.1016/j.matlet.2005.10.010 ↗
10. Corrosion resistance of zinc–magnesium coated steel10.1016/j.corsci.2007.03.032 ↗
11. Corrosion resistance and protection mechanism of hot-dip Zn–Al–Mg alloy coated steel sheet under accelerated corrosion environment10.2355/tetsutohagane1955.86.8_534 ↗
12. The lifetime assessment of hot-dip 5%Al–Zn coatings in chloride environments10.1016/S0257-8972(01)01508-0 ↗
13. Control of the growth of zinc–iron phases in the hot-dip galvanizing process10.1016/S0257-8972(99)00404-1 ↗
14. Corrosion products of hot-dip Zn–6%Al–3%Mg coated steel sheet subjected to atmospheric exposure10.2355/tetsutohagane1955.89.1_166 ↗
15. Effect of environmental cation species on corrosion near shear cut edge of 55%Al–Zn alloy coated steel sheet10.2355/isijinternational.49.574 ↗
16. Morphology and properties of hot dip Zn–Mg and Zn–Mg–Al alloy coatings on steel sheet10.1016/j.surfcoat.2010.10.006 ↗
17. The corrosion mechanism of Zn–5%Al–0.3%Mg coating
18. Effects of Mg additions on surface morphology and corrosion resistance of hot-dipped Zn coatings10.4028/www.scientific.net/DDF.273-276.300 ↗
19. Morimoto Y, Kurosaki M, Honda K, Nishimura K, Tanaka S, Takahashi A, Shindo H. The corrosion resistance of Zn–11%Al–3%Mg–0.2%Si hot-dip galvanized steel sheet. Tetsu-to-Hagane, 2003; 89: p. 161–5.10.2355/tetsutohagane1955.89.1_161 ↗
20. Gao B, Li SW, Tu GF, Yin SH, Shi WX, Hu L, Hao Y. The electroplating process and electrolyte for steel wire hot galvanizing. Northeastern University, Patent CN 101948990, 2010.
21. Tu GF, Li SW, Gao B, Hu L, Wen QL, Shi WX, Hao Y, Yin SH. A kind of experimental hot-dip galvanizing simulator and a technological process for hot dipping. Northeastern University, Patent CN 101838786, 2010.
22. Electrochemical and structural characterization of the mixed oxides-reinforced hot-dip zinc coating10.1016/j.surfcoat.2007.02.028 ↗
23. Studies on the influence of metal oxides on the galvanic characteristics of hot-dip zinc coating10.1016/j.surfcoat.2007.07.033 ↗
24. Behavior of hot-dip 55% Al–Zn alloy coating in salt water containing hydrogen sulfide
25. Zn/55Al coating microstructure and corrosion mechanism10.1016/j.corsci.2005.02.012 ↗
26. Cleary HJ, Horton JB, Melloy GF. Corrosion resistant aluminum–zinc coating and method of making. Bethlehem Steel Corporation, US Patent 3782909, 1974.
27. Air permeability of the artificially synthesized Zn–Al–Mg alloy rusts10.1016/j.corsci.2006.12.008 ↗
28. Effects of lanthanum addition on corrosion resistance of hot-dipped galvalume coating10.1016/S1002-0721(08)60203-3 ↗
29. Influence of rare earths addition on the corrosion behaviour of Zn–5%Al (Galfan) alloy in neutral aerated sodium sulphate solution10.1016/j.electacta.2007.05.041 ↗
30. Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn–Mg coating on steel10.1016/j.corsci.2009.03.005 ↗
31. Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere10.1016/j.conbuildmat.2008.07.002 ↗
32. Effect of cations on corrosion of zinc and carbon steel covered with chloride deposits under atmospheric conditions10.1016/j.corsci.2006.11.004 ↗
33. Corrosion product formation during NaCl induced atmospheric corrosion of magnesium alloy AZ91D10.1016/j.corsci.2006.08.004 ↗
34. Solution decomposition of the layered double hydroxide (LDH) of Zn with Al10.1016/j.solidstatesciences.2007.01.002 ↗
35. Barranco V, Feliu Jr. S, Feliu S. EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 1: directly exposed coatings. Corros Sci, 2004; 46:p. 2203–20.10.1016/j.corsci.2003.09.032 ↗
36. The evaluation of coating performance by the variations of phase angles in middle and high frequency domains of EIS10.1016/j.corsci.2008.08.049 ↗