Mechanical characterization of a bituminous mix under quasi-static and high-strain rate loading
Source abstract
Abstract
Abstract There are various methods to determine the compressive and tensile strength of asphalt concrete under static loading conditions and most studies on asphalt strength and fracture have been conducted under such loading conditions. However, pavement materials also have to withstand a wide variety of loading and temperature conditions which may vary from quasi-static to high-strain rate impact, and pavement breakdown may occur due to fracture and/or fatigue failure. In the present study, a bituminous mix with 30% RAP has been characterized under quasi-static (10−3–10−4 strain/s) and high-strain rate (200–700 strain/s) regimes. The experimental studies have been performed to better understand the compressive, tensile and fracture response of bituminous mixes. Split Hopkinson pressure bar (SHPB) and its modifications were used for high-strain rate characterization of this bituminous mixture. It was observed that the mechanical properties of the hot mix asphalt (HMA) changed significantly under high-strain rate testing. Also, the failure mechanisms observed under the high-strain rate loading were found to be considerably different from those obtained in static testing, where failure of binder was a predominant mechanism. It was observed that high-strain rate loading caused trans-aggregate failures in the specimens; in addition to failure of the binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Mechanical Behavior of Composites · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. ASTM D 5045-93. Plane-strain fracture toughness and strain energy release rate of plastic materials. ASTM Publication; 1993 [December].
2. Anderson · 1995
3. A split Hopkinson bar technique for low-impedance materials10.1007/BF02331109 ↗
4. Fabrication, characterization, and high-strain rate behavior of polyester/TiO2 nanocomposites10.1016/S0921-5093(03)00536-7 ↗
5. Evora VMF. Fabrication and high-strain rate mechanical behavior of nano composites. Doctoral dissertation, University of Rhode Island, USA, 2004.
6. Static and high-strain rate behavior of concrete and granite in tension with damage10.1016/S0167-8442(01)00054-4 ↗
7. Photoelastic evaluation of stress field and fracture during high-strain rate splitting experiments10.1520/JTE12306J ↗
8. Low-temperature fracture in reactive-ethylene-terpolymer-modified asphalt binders10.1080/1029843021000067809 ↗
9. Variation of fracture toughness of asphalt concrete under low temperatures10.1016/S0950-0618(97)00030-5 ↗
10. Mode I reflection cracking resistance of strengthened asphalt concretes10.1016/S0950-0618(99)00032-X ↗
11. Fracture toughness of polymer modified asphalt concrete at low temperature10.1139/l02-101 ↗
12. Evaluation of crack propagation properties of asphalt mixtures10.1061/(ASCE)0733-947X(1997)123:5(405) ↗
13. Stress–strain relationship for asphalt concrete in compression10.1007/BF02473452 ↗
14. Venkatram S. Fracture toughness and high-strain rate constitutive characterization of recycled asphalt pavement binder. Masters thesis, University of Rhode Island, USA, 1997.
15. Disk-shaped compact tension test for asphalt concrete fracture10.1177/0014485105053205 ↗
16. Wagoner MP, Buttlar WG, Paulino GH. Development of a single-edge notched beam test for the study of asphalt concrete fracture. In: Geo-Frontiers, 2005. p. 137–49 [Geotechnical Special Publication, 130–142].10.1061/40776(155)11 ↗