Behaviour of RC columns strengthened by steel caging under combined bending and axial loads
Source abstract
Abstract
The steel caging technique is used to strengthen RC columns all over the world, as it has been shown to be effective, economical and easy to apply. Most studies carried out to date on this strengthening technique have focussed on isolated sections of columns subjected to axial loads. This paper deals with an experimental study on the behaviour of RC columns strengthened by steel caging under combined bending and axial loads. Full-size specimens were laboratory tested and the beam–column joint was also simulated. Two different types of element were used to solve the strengthening in the zone nearest to the joint. These were: (1) capitals welded to the steel cage in contact with the beam and (2) steel tubes joining the cage on both sides of the joint. The results obtained show that the technique described considerably increases the resistance and ductility of columns strengthened in this way. The results are compared with those that could be obtained with the proposal of Eurocode No. 4 and also with the results of two other similar studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Axially loaded RC columns strengthened by steel caging. Finite element modelling10.1016/j.conbuildmat.2008.11.014 ↗
2. CEB-FIB. Seismic assessment and retrofit of reinforced concrete buildings. Bulletin no. 24, Task Group 7.1; 2003.
3. Simple method for upgrading an existing reinforced-concrete structure10.1061/(ASCE)1084-0680(1996)1:1(47) ↗
4. Japanese seismic rehabilitation of concrete buildings after the Hyogoken-Nanbu Earthquake10.1016/S0958-9465(99)00042-6 ↗
5. RC columns strengthened with bandage – experimental programme and design recommendations10.1016/S0950-0618(01)00015-0 ↗
6. Seismic behavior of corrosion-damaged reinforced concrete columns strengthened using combined carbon fiber-reinforced polymer and steel jacket10.1016/j.conbuildmat.2009.01.003 ↗
7. Reinforced concrete columns strengthened with angles and battens subjected to eccentric load10.1016/j.engstruct.2008.10.005 ↗
8. Design strength of axially loaded RC columns strengthened by steel caging10.1016/j.matdes.2009.05.014 ↗
9. Full-scale testing of axially loaded RC columns strengthened by steel angles and strips10.1260/136943309788251704 ↗
10. Influence of strips configuration on the behaviour of axially loaded RC columns strengthened by steel angles and strips10.1016/j.matdes.2009.05.010 ↗
11. Ten concrete column repair methods10.1016/0950-0618(95)00087-9 ↗
12. Behaviour of axially loaded RC columns strengthened by steel angles and strips10.12989/scs.2007.7.5.405 ↗
13. Axially loaded RC columns strengthened by steel caging10.1680/stbu.2009.162.3.199 ↗
14. Mathematical model of RC banded column behaviour10.1016/S0950-0618(01)00014-9 ↗
15. Experimental study of beam–column joints in axially loaded RC columns strengthened by steel angles and strips10.12989/scs.2008.8.4.329 ↗
16. Column-joint assembly in RC columns strengthened by steel caging10.1680/stbu.2008.161.6.337 ↗
17. Behavior of FRP jacketed concrete columns under eccentric loading10.1061/(ASCE)1090-0268(2001)5:3(146) ↗
18. Strengthening of eccentrically loaded reinforced concrete columns with fiber-reinforced polymer wrapping system: experimental investigation and analytical modelling10.1061/(ASCE)1090-0268(2009)13:1(13) ↗
19. Strength of reinforced concrete columns bonded with external steel plates10.1680/macr.2002.54.1.61 ↗
20. CEN. EN 1994-1-1 Eurocode 4: design of composite steel and concrete structures. Part 1: general rules and rules for buildings. Brussels (Belgium); 2004.
21. Simulated seismic load tests on reinforced concrete columns10.1061/(ASCE)0733-9445(1994)120:6(1825) ↗
22. Yazzar SA. Study of the ductility in high strength concrete compressed elements subjected to cyclic bending loads. PhD thesis. Universidad Politécnica de Valencia; 2000.
23. CEN. EN 1992-1-1 Eurocode 2: design of concrete structures, part 1: general rules and rules for buildings. Brussels (Belgium); 2004.
24. CEB-FIB model code 90. Laussane; 1991.
25. Fernández-Cánovas M. Patología y terapéutica del hormigón armado. Colegio de Ingenieros de Caminos, Canales y Puertos, Madrid; 1994 [in Spanish].
26. Teng · 2002
27. Observed stress–strain behavior of confined concrete10.1061/(ASCE)0733-9445(1988)114:8(1827) ↗
28. Theoretical stress–strain model for confined concrete10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗