Adhesion at interface of geopolymer and cement mortar under compression: An experimental study
Source abstract
Abstract
Abstract Based on a simple mechanical model that elucidates the effects of distinct components of a cement mortar specimen that contains a geopolymer interlayer, this study undertakes a series of laboratory tests to determine corresponding representative parameters for each component in the model. Failure modes, deformational moduli and strength parameters of cement mortar, geopolymer, their interface, and the composite specimen, are thus obtained. The apparent angle of friction of the interface is close to that of the geopolymer and markedly exceeds that of the cement mortar. The interface adhesion is 34–43% as strong as the cohesions of the two compositional components. The comprehensive failure envelope for the composite specimen can be used to predict the possible failure mode and strength under various stresses when geopolymer is used as an adhesive material to repair defects in concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
2. Recent progresses in concretes for nuclear waste and uranium waste containment
3. Fire-resistant geopolymer produced by granulated blast furnace slag
4. Effect of additional materials on the characterization of glass–ceramic produced from incinerator fly ashes10.1016/j.chemosphere.2004.02.009 ↗
5. Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers10.1016/j.clay.2009.08.015 ↗
6. Preparation and characterization of fly ash based geopolymer mortars10.1016/j.conbuildmat.2010.04.012 ↗
7. New concrete with low environmental load using the geopolymer method10.2219/rtriqr.51.1 ↗
8. Geopolymer-based smart adhesives for infrastructure health monitoring: concept and feasibility10.1061/(ASCE)MT.1943-5533.0000140 ↗
9. The geopolymerization of alumino–silicate minerals10.1016/S0301-7516(99)00074-5 ↗
10. Factors affecting the geopolymerization of alkali-feldspars
11. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
12. Thermal evolution of metakaoline geopolymers. Part I. Physical evolution10.1016/j.jnoncrysol.2006.09.019 ↗
13. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
14. Synthesis and tribological behavior of metakaolinite-based geopolymer composites10.1016/j.matlet.2004.08.049 ↗
15. The interface between natural siliceous aggregates and geopolymers10.1016/S0008-8846(03)00250-3 ↗
16. Adhesion of ceramic plates with geopolymer10.4028/www.scientific.net/MSF.643.139 ↗
17. Geopolymeric adhesives for aluminium joints10.4028/www.scientific.net/MSF.643.143 ↗
18. Investigation of interfacial fracture toughness between concrete mortar in an external wall tile structure10.1016/j.ijadhadh.2009.06.005 ↗
19. Effect of FRP bar degradation on interface bond with high strength concrete10.1016/j.cemconcomp.2008.05.006 ↗
20. Influence of the roughness of aggregate surface on the interface bond strength10.1016/S0008-8846(01)00668-8 ↗
21. Stress analysis and strength evaluation of scarf adhesive joints subjected to static tensile loadings10.1016/j.ijadhadh.2010.02.002 ↗
22. A three-dimensional finite-element stress analysis and strength evaluation stepped-lap adhesive joints subjected to static tensile loadings10.1016/j.ijadhadh.2008.04.011 ↗
23. Adhesion characterization of tungsten mine waste geopolymeric binder influence of OPC concrete substrate surface treatment10.1016/j.conbuildmat.2006.10.005 ↗
24. CNS 1230/A3043. Method for making and curing concrete test specimens in laboratory. Chinese National Standards; 2005.