Optimization of pervious concrete containing fly ash and iron oxide nanoparticles and its application for phosphorus removal
Source abstract
Abstract
Abstract Response surface methodology by a two-level central composite design optimized the ratios of water-to-binder (W/B), fly ash-to-binder (FA/B) and iron oxide nanoparticles-to-binder (ENP/B) for Portland cement pervious concrete (PCPC). Compressive strength, permeability, void content and density ranged 2.5–13.5 MPa, 5.3–17.4 mm/s, 12–22% and 2120–2360 kg/m3, respectively. W/B and FA/B had significant impacts on all the PCPC properties, whereas ENP/B produced significance only for the compressive strength. PCPC was optimized with 0.35 W/B, 0.15 FA/B and 0.05 ENP/B. The optimized PCPC exhibited enhanced phosphorus removal with the first-order removal constant at 0.031 h−1 and the Freundlich isotherm constant at 2.48 mg1−1/n kg−1 L1/n.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Concrete and Cement Materials Research · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Optimum mix design of enhanced permeable concrete - An experimental investigation10.1016/j.conbuildmat.2010.04.057 ↗
2. Review of permeable pavement systems10.1016/j.buildenv.2006.11.016 ↗
3. ACI, American Concrete Institute Committee 522. Report on Pervious Concrete. 1st ed., ACI 522R-10. American Concrete Institute, Michigan; 2010.
4. Effect of nano-SiO2, nano-Al2O3, nano-Fe2O3 powders on compressive strength and capillary water absorption of cement mortar containing fly ash: A comparative study10.1016/j.enbuild.2012.12.014 ↗
5. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
6. Beneficial role of nanosilica in cement based materials10.1016/j.conbuildmat.2013.05.052 ↗
7. Hydration of Portland cement with high replacement by siliceous fly ash10.1016/j.cemconres.2012.06.009 ↗
8. Durability performance of concrete incorporating Class F and Class C fly ashes10.1016/j.conbuildmat.2012.02.075 ↗
9. A review of the multi-component utilisation of coal fly ash10.1016/j.fuel.2012.03.024 ↗
10. Pervious high-calcium fly ash geopolymer concrete10.1016/j.conbuildmat.2011.12.028 ↗
11. Luck J.D., Workman S.R., Coyne M.S., Higgins S.F. Solid material retention and nutrient reduction properties of pervious concrete mixtures. Biosyst Eng; 2008;100:401-408.10.1016/j.biosystemseng.2008.03.011 ↗
12. Effect of fly ash fineness on microstructure of blended cement paste10.1016/j.conbuildmat.2005.12.024 ↗
13. Hydration of fly ash cement10.1016/j.cemconres.2004.09.008 ↗
14. Investigating the effect of mixture design parameters on pervious concrete by statistical modeling10.1016/j.conbuildmat.2012.07.044 ↗
15. Experimental study on Portland cement pervious concrete mechanical and hydrological properties10.1016/j.conbuildmat.2013.09.022 ↗
16. Novel technique for phosphorus recovery from aqueous solutions using amorphous calcium silicate hydrates (A-CSHs)10.1016/j.watres.2013.01.052 ↗
17. Sequestration of phosphorus from wastewater by cement-based or alternative cementitious materials10.1016/j.watres.2014.05.021 ↗