Green Bituminous Asphalt relevant for highway and airfield pavement
Source abstract
Abstract
Abstract As no heat is required for the manufacturing and laying of Cold Bituminous Emulsion Mixtures (CBEMs), significant advantages could be gained if these mixtures have mechanical properties equivalent to those of the traditional hot mixtures. Consequently, production of Green Bituminous Asphalt relevant for highway and airfield pavement constructions creates less environmental impact. This means that the use of CBEM could achieve many advantages such as, reduction of energy consumption, emission of pollutants and total costs. The purpose of this paper is to compare the mechanical properties of traditional hot mix and modified cold bituminous emulsion mixtures incorporated with waste materials. The waste or by-product materials were used as a modifier of the CBEM’s. The comparison was made through evaluating the modification gained in the mechanical properties, namely indirect tensile stiffness modulus and creep stiffness. The LJMU-FA1 (which is a waste material) was incorporated in the CBEM’s with different dosages ranging from 0% to 5.5% of aggregate weight in the mixture. The results have shown a significant improvement in terms of the mechanical properties of the new cold mixtures due to the use of the waste materials in contrast with the properties of traditional hot mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Read J, Whiteoak D. The shell bitumen handbook. In: S.U.o. products, editor. vol. 1. Heron Quay, London: Thomas Telford Publishing; 2003.
2. Micro hardness of interface between cement asphalt emulsion mastics and aggregates10.1617/s11527-009-9502-2 ↗
3. Holleran G, Ky A. Cold asphalt systems as an alternative to hot mix. In: 9th international Asphalt conference of AAPA; 1994.
4. Highway Authority and Utility Committee (HAUC). Specification for the reinstatement of opening in highways, New Roads and street works, in Act 1991. HMSO1992: London, UK; 1991.
5. Effect of cement on emulsified asphalt mixtures10.1007/s11665-007-9095-2 ↗
6. Needham D. Developments in bitumen emulsion mixtures for roads. PhD thesis, University of Nottingham; 1996.
7. Thanaya I. Improving the performance of cold bituminous emulsion mixtures incorporating waste materials. PhD thesis, The University of Leeds; 2003.
8. Head RW. An informal report of cold mix research using emulsified asphalt as a binder. In: Association of Asphalt Paving Technologists Proceeding (AAPT); 1974. p. 110–31.
9. Thanaya I, Zoorob S, Forth P. A laboratory study on cold-mix, cold-lay emulsion mixtures. In: Proceedings of the institution of civil engineers; 2009.10.1680/tran.2009.162.1.47 ↗
10. Hydration mechanisms, microstructure, and mechanical properties of mortars prepared with mixed binder cement slurry–asphalt emulsion10.1061/(ASCE)0899-1561(2003)15:1(54) ↗
11. Used cylinder oil modified cold-mix asphalt concrete10.3923/jas.2007.3485.3491 ↗
12. Thanaya I, Forth P, Zoorob S. Utilisation of coal ashes in hot and on cold bituminous mixtures. In: International coal ash technology conference, Paper ref. A92006: Birmingham, UK.
13. British Standard Institution. BS EN 933: Part 1. Test for geometrical properties of aggregate-determination of particle size distribution-sieving method. London, UK; 1997.
14. British Standard Institution. BS EN 12697: Part 28. Bituminous mixtures-test methods fof hot mix asphalt – preparation of samples for determine binder content, water content and grading. London, UK; 2001.
15. British Standard Institution. BS EN 4987: Part 1. Coated macadam (asphalt concrete) for roads and other paved areas: specification for constituent materials and for mixtures. London, UK; 2005.
16. Predicting performance of cold-mix pavement materials
17. Asphalt Institute. Asphalt Cold Mix Manual, manual series No. 14 (MS-14). 3rd ed.; 1989.
18. Jenkins · 2000
19. British Standard Institution. BS EN 1267-26 Bituminous mixtures-test methods for hot mix asphalt – Part 26 stiffness. London, UK; 2004.
20. British Standard Institution. Bituminous mixtures test methods for hot mix asphalt – Part 25: cyclic compression test. London UK; 2005.
21. The effect of temperature on the hydration rate and stability of the hydration phases of metakaolin–lime–water systems10.1016/S0008-8846(01)00642-1 ↗
22. Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste10.1016/S0008-8846(00)00441-5 ↗
23. Leech D. Cold bituminous materials for use in the structural layers of roads. Transportation Research Laboratory, Project Report 75, UK; 1994.
24. Montgomery · 2010