journal article·2016-02

Performance properties of rubberized stone matrix asphalt mixtures produced through different processes

Zhaoxing Xie, Junan Shen

Publisher page

Abstract

Abstract The study investigated the dynamic modulus, rutting resistance, moisture susceptibility and fatigue resistance of rubberized Stone Matrix Asphalt (SMA) through laboratory performance tests. Rubberized SMA mixes were produced by three processes: the dry process, the wet process and the terminal in the laboratory. For comparison purposes, SMA mixtures containing styrene–butadiene–styrene (SBS) modified binder and virgin asphalt of PG 67-22 were also evaluated and compared to rubberized SMA. Dynamic modulus and direct tension fatigue tests were performed using the Asphalt Mixture Performance Tester (AMPT) system. Rutting resistance and moisture susceptibility were analyzed by Hamburg wheel tracking test using asphalt pavement analyzer (APA). The results showed that: (1) the incorporation of CRM improved the high temperature dynamic modulus, the resistance to rutting and fatigue life of SMA mixes. (2) The introduction processes of CRM (dry process and wet process) may have effect on the high temperature dynamic modulus and rutting resistance, while no significant influence on the moisture susceptibility and fatigue life. (3) The use of combination of SBS and CRM in the terminal SMA significantly improved the resistance to rutting and fatigue cracking. (4) The rubberized SMA with 10% CRM had the lower performance properties than SBS SMA, regardless of the dry process or the wet process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Federal Highway Administration, The Use of Recycled Tire Rubber to Modify Asphalt Binder and Mixtures, FHWA-HIF-14-015, FHWA, U.S. Department of Transportation, 2014.
2. B. Huang, L.N. Mohammad, P.S. Graves, C. Abadie, Louisiana experience with crumb rubber-modified hot-mix asphalt pavement, in: Transportation Research Record: Journal of the Transportation Research Board, No. 1789, Transportation Research Board of the National Academies, Washington, D.C., 2002, pp. 1–13.10.3141/1789-01 ↗
3. K. Kaloush, M. Witczak, A. Sotil, G. Way, Laboratory evaluation of asphalt rubber mixtures using the modulus (E∗) test, in: Presented at 82nd Annual Meeting of the Transportation Research Board, Washington, D.C., 2003.
4. Laboratory investigation of open-graded friction-course mixtures containing polymers and cellulose fibers10.1061/(ASCE)TE.1943-5436.0000304 ↗
5. Performance evaluation of terminal blend tire rubber HMA and WMA mixtures—case studies
6. J.C.T. Hui, G.R. Morrison, S.A.M. Hesp, Improved low-temperature fracture performance for rubber-modified asphalt binders, in: Transportation Research Record: Journal of the Transportation Research Board, No. 1436, Transportation Research Board of the National Academies, Washington, D.C., 1994, pp. 83–87.
7. Evaluation of low-temperature and elastic properties of crumb rubber- and SBS-modified bitumen and mixtures10.1061/(ASCE)MT.1943-5533.0000590 ↗
8. Rahman · 2004
9. J. Shen, Z. Xie, Comprehensive Evaluation of the Long-Term Performance of Rubberized Pavement: Phase I: Laboratory Study of Rubberized Asphalt Mix Performance. FHWA-GA-12-1119. FHWA, U.S. Department of Transportation, 2012.
10. Z. Xie, J. Shen, Long-term performance of SMA mixtures added with crumb rubbers in dry process, in: Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements, Los Angeles, California, 2013, pp. 1145–1155.10.1061/9780784413005.096 ↗
11. Standard Specifications Construction of Transportation Systems, Georgia Department of Transportation, 2013.
12. Development of a fatigue failure criterion for asphalt mixtures under different modes of fatigue loading10.3141/2447-13 ↗
13. A. Norouzi, M.R. Sabouri, Y.R. Kim, Evaluation of the fatigue performance of asphalt mixtures with high RAP content. Journal of Taylor and Francis Group, London, UK, 2014, pp. 1069–1077.
14. Y.R. Kim, M.N. Guddati, B.S. Underwood, T.Y. Yun, V. Subramanian, S. Savadatti, 2009. Development of A Multiaxial Viscoelastoplastic Continuum Damage Model for Asphalt Mixtures. Report No. FHWA-HRT-08-073.