Analysis of the debonding process of CFRP-to-timber interfaces
Source abstract
Abstract
Abstract The use of Fiber Reinforced Polymers (FRP) in the strengthening of timber structures is quite recent and few studies have discussed the debonding between these materials. The analysis of the Mode II debonding process between FRP composites and timber elements may be of great importance because this mode is predominant in the case, for instance, of the bending of beams. Knowing the appropriate bond-slip model to use on the estimation of the performance of FRP-to-timber interfaces is greatly relevant. Under such circumstances, a detailed knowledge of all the states that CFRP-to-timber interfaces are subjected to is important as well. The current work gives answers to these aspects proposing an analytical solution based on a tri-linear bond-slip model that is capable of describing precisely the full-range debonding behavior of FRP-to-timber interfaces. Thus, the purpose of this study is to contribute to existing knowledge with an analytical solution capable of describing the full-range debonding process between a FRP composite and a substrate. The analytical solutions herein proposed are also compared with the results obtained from several experiments based on single-lap shear tests. Comparisons at different load levels and different bonded lengths are presented. The slips, strains in the CFRP composite and bond stress distributions within the bonded interface are emphasized in the text. The complete load-slip response of CFRP-to-timber interface is also analyzed. Each state of the debonding process is described and each one is identified in the load-slip curve.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Full-range behaviour of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
2. Interfacial stresses in plated beams10.1016/S0141-0296(00)00090-0 ↗
3. FRP-strengthened RC beams-II: assessment of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
4. Finite element modelling of concrete cover separation failure in FRP plated RC beams10.1016/S0950-0618(02)00090-9 ↗
5. Concrete beams with plates glued to their soffits
6. Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
7. Unified analytical approaches for determining shear bond characteristics of FRP-concrete interfaces through pullout tests10.3151/jact.4.133 ↗
8. Modelling the FRP-concrete delamination by means of an exponential softening law10.1016/j.engstruct.2011.02.036 ↗
9. Biscaia · 2012
10. Borba · 2015
11. Bond behavior between fiber-reinforced polymer laminates and concrete
12. An experimental study on delamination of FRP plates bonded to concrete10.1016/j.conbuildmat.2007.04.009 ↗
13. A new single-shear set-up for stable debonding of FRP-concrete joints10.1016/j.conbuildmat.2008.04.003 ↗
14. Analysis of FRP–concrete debonding via boundary integral equations10.1016/j.engfracmech.2007.05.016 ↗
15. Nonlinear numerical analysis of the debonding failure process of FRP-to-concrete interfaces10.1016/j.compositesb.2013.02.013 ↗
16. H.C. Biscaia, C. Chastre, I.S. Borba, C. Silva, D. Cruz, Experimental evaluation of bonding between CFRP laminates and various structural materials. J. Compos. Constr. doi: http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000631.10.1061/(ASCE)CC.1943-5614.0000631 ↗
17. Strengthening of concrete, metallic and timber construction materials with FRP composites
18. A new discrete method to model FRP–to-parent material bonded joints10.1016/j.compstruct.2014.10.036 ↗
19. Linear and nonlinear analysis of bond–slip models for interfaces between FRP composites and concrete10.1016/j.compositesb.2012.08.011 ↗
20. FRP-to-softwood joints: an experimental investigation
21. Experimental investigation on FRP-to-timber bonded interfaces10.1061/(ASCE)CC.1943-5614.0000418 ↗
22. Interface crack between two interface deformable piezoelectric layers10.1007/s10704-009-9359-y ↗
23. An analytical analysis of the full-range behaviour of grouted rockbolts based on a tri-linear bond-slip model10.1016/j.conbuildmat.2009.08.021 ↗
24. Delamination process analysis of FRP-to-parent material bonded joints with and without anchorage systems using the Distinct Element Method10.1016/j.compstruct.2014.04.021 ↗
25. Factors influencing the performance of externally bonded reinforcement systems of GFRP-to-concrete interfaces10.1617/s11527-014-0370-z ↗
26. 2012
27. Flexural behaviour of RC T-beams strengthened with different FRP materials
28. 2013
29. Numerical analysis of FRP anchorage zones with variable width10.1016/j.compositesb.2014.07.031 ↗